Evergreen Ripple Phone Charging Holder Crochet Pattern

This wall-hanging phone holder keeps your phone off the floor while it charges. It hangs from its own handle over the charger plug. A front pocket holds the phone, and a slim side sleeve with a strap holds the coiled cable.

It uses two colors: deep forest green and soft mint. A tight single crochet chevron gives crisp zigzag stripes. Every panel is outlined in forest green with softly rounded corners. A mint five-petal flower with a green center and a two-leaf sprig decorate the pocket.

The pattern uses US terms. The holder measures 8.5 in (21.6 cm) wide including the sleeve, and 8.7 in (22.1 cm) tall to the rim. The handle rises about 3 in (7.6 cm) above that.

You make seven flat pieces and edge the panels. Then you join the pocket to the back with single crochet, add a crab-stitch rim, and sew on the sleeve, handle, and appliqués.

Finished Size and Construction

  • Finished size: 8.5 in (21.6 cm) x 8.7 in (22.1 cm), plus a 3 in (7.6 cm) handle loop
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4)
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 7 (back panel, front pocket, cord sleeve strip, cable strap, handle, flower, leaf sprig)
  • Layout: Pocket on the lower back panel, sleeve on the right, handle on top
  • Panel sizes: back 6 in (15.2 cm) x 8.5 in (21.6 cm); pocket 6 in (15.2 cm) x 5.5 in (14.0 cm)
  • Size before edging: back 5.5 in (14.0 cm) x 8 in (20.3 cm); pocket 5.5 in (14.0 cm) x 5 in (12.7 cm)
  • Edging depth: 0.25 in (0.6 cm) per side
  • Rim (border) depth: about 0.2 in (0.5 cm)

Materials

Use a smooth worsted cotton or cotton blend. Cotton holds its shape under the weight of a phone and shows the chevrons clearly.

  • Color A, forest green: 100 g (170 m)
  • Color B, mint: 50 g (85 m)

These quantities include a margin of about 25%.

Tools: 4.5 mm (US 7) hook, tapestry needle, scissors, 4 stitch markers, rust-proof pins, blocking mat, spray bottle, tape measure.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sc2tog / sc3tog – single crochet 2 / 3 together
  • st(s) – stitch(es)
  • RS / WS – right side / wrong side

Reverse sc (crab stitch): Work from left to right. Insert the hook in the next st to the right, pull up a loop, yarn over, and pull through both loops. This makes a raised, rope-like rim.

Color changes: Finish the last st of a row in the new color. Carry the unused color up the side; the edging will cover it.

Gauge and Checkpoints

  • Plain sc: 18 sts and 20 rows = 4 in (10.2 cm)
  • Chevron: 31 sts = 5.5 in (14.0 cm) wide; 20 rows = 4 in (10.2 cm) tall

Make the front pocket first. It is the smallest main panel, so it works as your gauge test.

  • After Row 10 of any panel: 2 in (5.1 cm) tall
  • Pocket before edging: 5.5 in (14.0 cm) x 5 in (12.7 cm)
  • Back before edging: 5.5 in (14.0 cm) x 8 in (20.3 cm)
  • Edging adds 0.5 in (1.3 cm) in each direction

Too big? Use a 4 mm hook. Too small? Use a 5 mm hook. Never change the stitch counts, because the joining depends on them.

Teal and mint crocheted pouches with chevron stripes, decorated with flower and leaf embellishments, displayed on wood and holding a phone.

The Chevron Stitch Pattern

Each chevron panel has (10 x number of peaks) + 1 sts. Each 3-sc peak adds 2 sts and each sc3tog valley removes 2, so every row keeps the same count.

Base Row (flat bottom): Ch 32. Sc in 2nd ch from hook and next ch, hdc in next 2 ch, dc in next 3 ch, hdc in next 2 ch, sc in next 3 ch, hdc in next 2 ch, dc in next 3 ch, hdc in next 2 ch; rep from * once more, sc in last 2 ch. Turn. (31 sts)

Chevron Row: Ch 1 (does not count), sc2tog, sc in next 3 sts, 3 sc in next st, sc in next 3 sts, sc3tog, sc in next 3 sts, 3 sc in next st, sc in next 3 sts; rep from * once more, sc2tog. Turn. (31 sts)

Leveling Row (flat top): Ch 2 (does not count), dc in first 2 sts, hdc in next 2 sts, sc in next 3 sts, hdc in next 2 sts, dc in next 3 sts, hdc in next 2 sts, sc in next 3 sts, hdc in next 2 sts; rep from * once more, dc in last 2 sts. (31 sts)

The tall base stitches sit under the peaks, and the tall leveling stitches fill the valleys. This keeps the top and bottom edges straight.

Stripes: Work Rows 1–4 in A, then repeat (2 rows B, 3 rows A). Mint falls on Rows 5–6, 10–11, 15–16, and so on.

Back Panel

Row 1 (A): Base Row. (31 sts)

Rows 2–39: Chevron Row. Rows 5–6, 10–11, 15–16, 20–21, 25–26, 30–31, and 35–36 are B; all others are A. (31 sts)

Row 40 (A): Leveling Row. (31 sts) Do not fasten off.

Checkpoint: 5.5 in (14.0 cm) x 8 in (20.3 cm).

Edging Round (A): Each rounded corner is 2 sc in the end st of the top or bottom edge, and those 2 sc count toward that edge.

  • Side: 1 sc in each row end. (40 sts)
  • Bottom, into the foundation ch: 2 sc in first ch, sc in next 29 ch, 2 sc in last ch. (33 sts)
  • Side: 1 sc in each row end. (40 sts)
  • Top: 2 sc in first st, sc in next 29 sts, 2 sc in last st. (33 sts)

Sl st to first sc. (146 sts) Fasten off. Size: 6 in (15.2 cm) x 8.5 in (21.6 cm).

Front Pocket

Row 1 (A): Base Row. (31 sts)

Rows 2–24: Chevron Row. Rows 5–6, 10–11, 15–16, and 20–21 are B; all others are A. (31 sts)

Row 25 (A): Leveling Row. (31 sts)

Checkpoint: 5.5 in (14.0 cm) x 5 in (12.7 cm).

Edging Round (A): Work as for the back, with 25 sc on each side: 25 + 33 + 25 + 33. (116 sts) Size: 6 in (15.2 cm) x 5.5 in (14.0 cm).

Cord Sleeve Strip

This is one long strip that folds in half at the bottom to make a two-layer sleeve.

Row 1 (A): Ch 12. Sc in 2nd ch from hook and next ch, hdc in next 2 ch, dc in next 3 ch, hdc in next 2 ch, sc in last 2 ch. (11 sts)

Rows 2–59: Ch 1, sc2tog, sc in next 3 sts, 3 sc in next st, sc in next 3 sts, sc2tog. (11 sts) Mint rows: 5–6, 10–11, 15–16, 20–21, 25–26, 30–31, 35–36, 40–41, 45–46, 50–51, 55–56.

Row 60 (A): Ch 2, dc in first 2 sts, hdc in next 2 sts, sc in next 3 sts, hdc in next 2 sts, dc in last 2 sts. (11 sts)

Checkpoint: 2 in (5.1 cm) x 12 in (30.5 cm).

Edging Round (A): 60 + 13 (2 sc, 9 sc, 2 sc) + 60 + 13. (146 sts) Size: 2.5 in (6.4 cm) x 12.5 in (31.8 cm).

Cable Strap

Row 1 (A): Ch 13, sc in 2nd ch from hook and each ch across. (12 sts)

Rows 2–3: Ch 1, sc in each st. (12 sts)

Size: 2.7 in (6.9 cm) x 0.6 in (1.5 cm).

Handle

Row 1 (A): Ch 37, sc in 2nd ch from hook and each ch across. (36 sts)

Rows 2–4: Ch 1, sc in each st. (36 sts)

The flat strap measures 8 in (20.3 cm) x 0.8 in (2.0 cm). Fold it lengthwise and sl st the long edges together. (36 sl sts) It becomes a rounded cord about 0.4 in (1.0 cm) thick. Leave a long tail.

Flower

Rnd 1 (A): Magic ring, ch 1, 10 sc in ring, sl st to first sc. (10 sts) Fasten off.

Rnd 2 (B): Join B in any st, ch 1, 2 sc in each st, sl st to first sc. (20 sts)

Rnd 3 (B): Sl st in next st, (hdc, 2 dc) in next st, (2 dc, hdc) in next st, sl st in next st; rep from * 4 more times. (5 petals of 6 sts each, with 2 sl sts between petals)

Diameter: about 2.25 in (5.7 cm).

Leaf Sprig

Leaf (make 2, A): Ch 9. Sc in 2nd ch from hook, hdc in next ch, dc in next 3 ch, hdc in next ch, sc in next ch, 3 sc in last ch (tip). Working along the other side of the chain: sc in next ch, hdc in next ch, dc in next 3 ch, hdc in next ch, sc in last ch. Sl st to first sc. (17 sts)

Each leaf is about 1.8 in (4.6 cm) long. Surface sl st a center vein in A.

Stem (A): Ch 14, sl st in 2nd ch from hook and each ch across. (13 sts) It is about 3 in (7.6 cm) long.

Sew one leaf to the stem tip and one to the middle of the stem, angled outward.

Make All Pieces

Piece Qty Colors
Back panel 1 A + B
Front pocket 1 A + B
Cord sleeve strip 1 A + B
Cable strap 1 A
Handle 1 A
Flower 1 A center, B petals
Leaf sprig 1 (2 leaves + stem) A

Layout (front view):

     [  HANDLE  ]
[  BACK PANEL  ]
[ FRONT POCKET ][SLEEVE]
[ FRONT POCKET ][SLEEVE]

Before joining: Sew the flower to the pocket, 1.5 in (3.8 cm) above the bottom and slightly right of center. Tuck the sprig under the flower’s lower left, with the leaves pointing left.

Joining

Method: Join with sc in A through both layers. This creates the firm dark outline.

  1. Place the pocket on the RS of the back panel, with the bottom and side edges aligned.
  2. Number the back side sts from the bottom. Pocket side sts 1–25 match back side sts 1–25.
  3. Join A at the pocket’s top left corner. Sc through both layers down the side, 1 to 1. (25 sts)
  4. Continue along the bottom, 1 to 1. (33 sts)
  5. Work up the right side, 1 to 1. (25 sts)

Total: 83 sc. Fasten off. Keep your tension even and slightly relaxed. A tight join pulls the corners in and makes the pocket cup.

Cord sleeve: Center the cable strap across the RS of the strip, 1.5 in (3.8 cm) above the midpoint, and tack down only its middle. Fold the strip in half, WS together. Each long side now has 30 front sts over 30 back sts (st 1 matches st 60, and st 30 matches st 31). Sc the sides together with A, catching the strap ends in the seams. (30 sts per side)

Whipstitch the sleeve’s left seam to the main body’s right seam, with the bottoms aligned: 25 sleeve sts to 25 seam sts. The top 5 sleeve sts stand free.

Checkpoint: 8.5 in (21.6 cm) x 8.5 in (21.6 cm).

Border

The border is a crab-stitch rim worked after joining. Work 1 crab st in each edging st; the rim is about 0.2 in (0.5 cm) deep. It adds no stitches, so the edges neither stretch nor gather.

Back rim (A): Join at back side st 26 on the right edge, just above the pocket seam. Work reverse sc:

  • Right side, sts 26–40: 15 sts
  • Top: 33 sts
  • Left side, sts 40–26: 15 sts

Total: 63 sts. Fasten off.

Pocket rim (A): Work reverse sc in each of the 33 pocket top sts. (33 sts) Fasten off.

Why the math works: Each back side has 40 sts. The join used 25, which leaves 15 free on each side. With the 33 top sts, 15 + 33 + 15 = 63. The pocket top was not part of the join, so it still has its 33 edging sts.

Handle: Sew each end to the WS of the back panel top, 1 in (2.5 cm) in from each corner, overlapping 0.75 in (1.9 cm). The loop rises about 3 in (7.6 cm).

Final Blocking

  1. Weave in all ends along stitches of the same color.
  2. Lay the holder face up on the mat.
  3. Pin the back to 6 in (15.2 cm) x 8.5 in (21.6 cm). Pin the pocket and sleeve edges straight.
  4. Mist until damp, not soaked.
  5. Nudge the chevron peaks into straight vertical lines.
  6. Slide a folded towel into the pocket and the sleeve to give them depth.
  7. Let it dry completely, then unpin.

Final Quality-Control Checklist

  • Every chevron row has 31 sts (11 on the sleeve)
  • Peaks line up vertically
  • Top and bottom panel edges are straight
  • The joining seam is 83 sc with no gaps at the corners
  • The back rim is 63 sts and the pocket rim is 33 sts
  • The sleeve top sits about 0.75 in (1.9 cm) above the pocket rim
  • The appliqués and handle are firmly attached

Troubleshooting

Peaks drift sideways: A st was missed or added. Count to 31 at the end of every row.

Side edges slant: An end sc2tog was skipped. Rework the row.

Bottom edge scallops: Check that the Base Row has dc under each peak.

Pocket too snug: Rework the join with looser tension or a 5 mm hook.

Flower cups: Block it flat with a pin at each petal.

Care

Hand wash in cool water and lay flat to dry. Reshape the pocket while it is damp.

Handmade crochet bag in forest green with light green chevron pattern and flower embellishment, carried by handles.

Final Notes

The measurement chain is short:
– Chevron gauge gives 5.5 in (14.0 cm) panels.
– Edging adds 0.5 in (1.3 cm), making 6 in (15.2 cm) panels.
– Matching counts give a clean 83-st join.
– The sleeve brings the width to 8.5 in (21.6 cm).
– The rim finishes the height at 8.7 in (22.1 cm).

Check each step as you go, and the holder will hang straight.

Happy crocheting!

Leave a Comment