Lavender Daisy Cable Charging Holder Crochet Pattern

This wall-hanging phone charging holder keeps your phone and cable tidy next to the outlet. Lavender cables cover every panel, and a cream rope-textured border outlines each piece. A cream-and-yellow daisy with a green leaf sprig decorates the front pocket.

The holder has three parts: a tall back panel with a hanging handle, a front pocket that holds the phone while it charges, and a narrow side pocket for the coiled cable. The colors are soft lavender, warm cream, golden yellow and olive green, which gives it a cottage-garden look.

The pattern uses US crochet terms. The main holder measures 7″ x 9″ (17.8 x 22.9 cm). With the side pocket it is 10.5″ (26.7 cm) wide, and the handle arch adds about 3.5″ (8.9 cm) at the top.

Each panel is worked flat in rows of half double crochet with front-post cables, then gets a cream border. Next you make the handle, two bands and the appliqués. Last, you sew everything together and block it.

Finished Size and Construction

  • Finished size: main holder 7″ x 9″ (17.8 x 22.9 cm); 10.5″ (26.7 cm) wide with the side pocket
  • Skill level: Intermediate (front-post cables, reverse single crochet)
  • Terminology: US
  • Yarn weight: Worsted (#4)
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 8 components: back panel, front pocket, side pocket strip, handle, 2 bands, daisy, and leaf sprig (a stem plus 5 small leaves)
  • Layout: front pocket over the lower back panel, side pocket on the right, handle on top, appliqués on the pocket
  • Piece sizes before border: back panel 6″ x 8″ (15.2 x 20.3 cm); front pocket 6″ x 5″ (15.2 x 12.7 cm); side strip 2.5″ x 12″ (6.4 x 30.5 cm)
  • Border depth: 0.5″ (1.3 cm) per side

Materials

Use a smooth, plied worsted cotton or cotton blend. Cotton shows the cable crossings clearly and holds its shape when the holder hangs on the wall.

  • Lavender: 100 g / 200 m (about 219 yd)
  • Cream: 25 g / 50 m (about 55 yd)
  • Golden yellow: 5 g / 10 m (about 11 yd)
  • Olive green: 10 g / 20 m (about 22 yd)

Tools:

  • 5.0 mm (H-8) crochet hook
  • Tapestry needle
  • Locking stitch markers
  • Scissors
  • Blocking mat, rust-proof pins, spray bottle
  • Measuring tape

All quantities include about 25% extra for swatching and tails.

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • FPdc: front post double crochet
  • FPtr: front post treble crochet
  • rev sc: reverse single crochet (crab stitch)
  • st(s): stitch(es)
  • sp: space
  • RS / WS: right side / wrong side

Special stitch: Cable Cross (CC). Skip the next 2 FP sts. FPtr around each of the next 2 FP sts. Then, working in front of the sts you just made, FPtr around each of the 2 skipped sts. Every post stitch is worked around the post stitch 2 rows below, and you skip the hdc behind it. CC counts as 4 sts.

Rev sc: Work sc from left to right (right-handed). This makes the cream rope edge.

Gauge and Checkpoints

Gauge: 16 sts and 12 rows = 4″ (10.2 cm) in the cable pattern. For the border, 16 sc = 4″ (10.2 cm).

Make the front pocket first and use it as your test piece. It has the same width as the back panel.

  • Row 3: The panel is 6″ (15.2 cm) wide.
  • Row 15: The pocket is 5″ (12.7 cm) tall.
  • After the border: The pocket is 7″ x 6″ (17.8 x 15.2 cm).

If your piece is too big, go down a hook size. If it’s too small, go up one. Cables pull the fabric in, so measure across the cables, not across the foundation chain.

Close-up of lavender crocheted fabric with white daisy appliqué, yellow center, green leaves, cream trim.

Cable Panel Stitch Pattern

Each cable is 4 sts wide, with 3 hdc on both sides of every cable. A panel with n cables is 3 + 7n sts wide.

Row 1 (WS): Hdc in the 3rd ch from the hook and in each ch across. Turn. (The ch-2 at the start of a row never counts as a stitch.)

Row 2 (RS): Ch 2, hdc in the first 3 sts, *FPdc around each of the next 4 sts, hdc in the next 3 sts; repeat from * across. Turn.

Row 3 (WS): Ch 2, hdc in each st across. Turn.

Row 4 (RS, cross row): Ch 2, hdc in the first 3 sts, *CC, hdc in the next 3 sts; repeat from * across. Turn.

Row 5: Repeat Row 3.

Row 6 (RS): Ch 2, hdc in the first 3 sts, *FPdc around each of the next 4 FP sts 2 rows below (skip the hdc behind them), hdc in the next 3 sts; repeat from * across. Turn.

Row 7: Repeat Row 3.

Repeat Rows 4–7 for the pattern. The stitch count stays the same on every row.

Back Panel

With lavender, ch 26.

Row 1 (WS): Work Row 1 of the stitch pattern. (24 hdc)

Rows 2–3: Work Rows 2–3. You now have 3 cables. (24 sts)

Rows 4–23: Work Rows 4–7 five times. (24 sts)

Row 24 (RS): Repeat Row 4. (24 sts) Fasten off.

Checkpoint: 6″ x 8″ (15.2 x 20.3 cm).

Front Pocket

With lavender, ch 26.

Rows 1–3: Work Rows 1–3 of the stitch pattern. (24 sts)

Rows 4–15: Work Rows 4–7 three times. (24 sts) Fasten off.

Checkpoint: 6″ x 5″ (15.2 x 12.7 cm).

Side Pocket Strip

With lavender, ch 12.

Rows 1–3: Work Rows 1–3 of the stitch pattern. You now have 1 cable. (10 sts)

Rows 4–35: Work Rows 4–7 eight times. (10 sts)

Row 36 (RS): Repeat Row 4. (10 sts) Fasten off.

Checkpoint: 2.5″ x 12″ (6.4 x 30.5 cm).

Handle

With lavender, ch 41.

Row 1: Sc in the 2nd ch from the hook and in each ch across. Turn. (40 sc)

Row 2: Ch 1, sc in each st across. (40 sc)

Fold the strip in half lengthwise. Sl st the free loops of the foundation chain to the Row 2 stitches to close it into a rounded cord 10″ (25.4 cm) long. Fasten off and leave a 12″ (30.5 cm) tail.

Bands (Make 2)

With cream, ch 15.

Row 1: Sc in the 2nd ch from the hook and in each ch across. Turn. (14 sc)

Row 2: Ch 1, sc in each st across. (14 sc)

Each band is 3.5″ x 0.5″ (8.9 x 1.3 cm). Fasten off and leave a long tail.

Daisy

Rnd 1: With yellow, make a magic ring and work 8 sc into it. Sl st to the first sc. (8 sc) Fasten off.

Rnd 2: Join cream in any st. Ch 1, 2 sc in each st around. Sl st to the first sc. (16 sc)

Rnd 3: *Sl st in the next st, ch 2, 2 dc in the same st, 2 dc in the next st, ch 2, sl st in the same st; repeat from * 7 more times. (8 petals)

The daisy is about 3″ (7.6 cm) across. Leave a tail for sewing.

Leaf Sprig

Leaves (make 5): With green, ch 8. Sc in the 2nd ch from the hook, hdc in the next ch, dc in the next 3 ch, hdc in the next ch, then (sc, ch 2, sc) in the last ch for the point. Now work along the other side of the chain: hdc in the next ch, dc in the next 3 ch, hdc in the next ch, sc in the last ch, sl st to the first sc. Each leaf is about 1.5″ (3.8 cm) long. Leave a tail for sewing.

Stem: With green, ch 17. Sl st in the 2nd ch from the hook and in each ch across. (16 sl st) The stem is about 3.5″ (8.9 cm) long.

Sew one leaf to the top of the stem. Sew the other 4 leaves in two pairs, spaced 1″ (2.5 cm) apart down the stem. The finished sprig is about 5″ (12.7 cm) long.

Make All Pieces

  • Lavender: 1 back panel, 1 front pocket, 1 side strip, 1 handle
  • Cream: border on each of the 3 panels, 2 bands, daisy petals
  • Yellow: 1 daisy center
  • Green: 1 stem, 5 leaves

Layout (front view):

         [ HANDLE ]
+------------------+
|    BACK PANEL    |
|+----------------+| +------+
||  FRONT POCKET  || | SIDE |
||                || | BAND |
|| leaf + daisy   || | BAND |
|+----------------+| +------+
+------------------+

Border

Work this border on the back panel, the front pocket and the side strip before you join anything. Since no pieces are joined yet, every count below is for one piece only.

Border gauge: 16 sc = 4″ (10.2 cm). The panels have 4 sts per inch across and 3 rows per inch. On the top and bottom, work 1 sc in each st. On the sides, work 4 sc for every 3 rows. That gives 4 sc per inch on every edge, so the edges lie flat.

The side counts below do not include the corners. Each corner is a separate ch-1 sp.

Rnd 1: With RS facing, join cream in the top right corner st and ch 1. Sc across the top and ch 1. Sc down the side and ch 1. Sc across the bottom in the foundation loops and ch 1. Sc up the other side and ch 1. Sl st to the first sc.

  • Back panel: 24 / 32 / 24 / 32 = 112 sc + 4 ch-1 sps
  • Front pocket: 24 / 20 / 24 / 20 = 88 sc + 4 ch-1 sps
  • Side strip: 10 / 48 / 10 / 48 = 116 sc + 4 ch-1 sps

Rnd 2: Ch 1, rev sc in each sc and in each corner ch-1 sp around. Sl st to the first st and fasten off.

  • Back panel: 112 + 4 = 116 rev sc
  • Front pocket: 88 + 4 = 92 rev sc
  • Side strip: 116 + 4 = 120 rev sc

The single ch-1 at each corner adds very little extra fabric, so the rope edge eases around the corner into the soft curve you see on the finished holder.

Why the math works: On the sides, 24 rows ÷ 3 × 4 = 32 sc, 15 rows ÷ 3 × 4 = 20 sc, and 36 rows ÷ 3 × 4 = 48 sc. The border adds 0.5″ (1.3 cm) on each side, so the finished sizes are:

  • Back panel: 7″ x 9″ (17.8 x 22.9 cm)
  • Front pocket: 7″ x 6″ (17.8 x 15.2 cm)
  • Side strip: 3.5″ x 13″ (8.9 x 33.0 cm)

Joining

Front pocket to back panel: Lay the pocket on the back panel, RS up, with the bottom and side edges lined up. With lavender, whipstitch through the Rnd 1 sc of both pieces. Sew under the rev sc ridge so the seam stays hidden.

  • Bottom: Match 24 sc to 24 sc and corner sp to corner sp.
  • Sides: Match the pocket’s 20 sc to the lowest 20 of the back panel’s 32 sc.
  • Top: Leave the pocket’s top edge open.

Side pocket: Fold the strip in half crosswise with RS out, so both cream short ends meet at the top. The fold falls between sc 24 and sc 25 of each 48-sc side. Whipstitch the 24 front sc to the 24 back sc on each long side. The pocket now measures 3.5″ x 6.5″ (8.9 x 16.5 cm).

Line up the bottom fold with the bottom of the holder. Whipstitch the side pocket’s left edge to the right border edge of the back panel and front pocket.

Bands: Sew one band across the side pocket front 2″ (5.1 cm) above the fold and the other 4″ (10.2 cm) above it. Sew only the band ends down.

Handle: Sew each end to the back of the back panel, 1″ (2.5 cm) below the top edge and 1.5″ (3.8 cm) in from the side. This leaves a 3.5″ (8.9 cm) arch.

Appliqués: Sew the sprig at an angle on the lower left of the pocket. Then sew the daisy so it overlaps the top of the stem.

Tension: Keep whipstitches snug but not tight. Each seam should be the same length as the edges it joins.

Size checkpoint: The assembled holder measures 10.5″ x 9″ (26.7 x 22.9 cm), not counting the handle.

Final Blocking

  1. Mist the holder until it’s evenly damp.
  2. Lay it RS up on the blocking mat.
  3. Pin the back panel to 7″ x 9″ (17.8 x 22.9 cm) and ease the corners into smooth curves.
  4. Slip a folded cloth into each pocket so the pockets dry open.
  5. Shape the petals and leaves with your fingertips. Don’t flatten the cables.
  6. Let it dry completely before you unpin it.

Final Quality-Control Checklist

  • Back panel is 7″ x 9″ (17.8 x 22.9 cm).
  • Front pocket is 7″ x 6″ (17.8 x 15.2 cm) and open at the top.
  • Side pocket is 3.5″ x 6.5″ (8.9 x 16.5 cm) and sewn on both long sides.
  • Border counts are 116, 92 and 120 rev sc.
  • All cables cross in the same direction.
  • Handle ends are secure and the arch is even.
  • Appliqués lie flat with no loose tips.
  • All ends are woven in on the WS.

Troubleshooting

  • Panel narrower than 6″ (15.2 cm): Loosen your post stitches or go up a hook size.
  • Wavy sides after the border: Recount the sides. You should have 4 sc per 3 rows.
  • Cupped corners: Work Rnd 2 more loosely.
  • Flat-looking cables: Make sure you’re working around the posts 2 rows below.
  • Gaps at the pocket’s top corners: Add one extra whipstitch at each corner.
  • Twisted handle: Untwist it before sewing and steam it lightly.

Care

Hand wash in cool water with mild soap. Roll it in a towel to press out the water, then dry it flat in shape.

Purple crochet phone organizer with cream trim and daisy flower, hanging on white brick wall above a small potted succulent.

Final Notes

Here is how the measurements build up. The gauge of 16 sts and 12 rows = 4″ (10.2 cm) gives a 6″ x 8″ (15.2 x 20.3 cm) back panel and a 6″ x 5″ (15.2 x 12.7 cm) pocket. The 0.5″ (1.3 cm) border brings these to 7″ x 9″ (17.8 x 22.9 cm) and 7″ x 6″ (17.8 x 15.2 cm). The 2.5″ x 12″ (6.4 x 30.5 cm) strip borders to 3.5″ x 13″ (8.9 x 33.0 cm) and folds to 3.5″ x 6.5″ (8.9 x 16.5 cm). Together they make a holder 10.5″ (26.7 cm) wide.

Happy crocheting!

Leave a Comment