Gingerbread Lane Lace Strip Crochet Pattern

This lace strip has three cheerful gingerbread men stacked inside an airy cream frame. Each cookie is worked in warm rust brown and outlined in cream. It is finished with a stitched face, wavy icing lines and three burgundy buttons.

The frame is classic openwork. A fan of tall spokes rises from each head, and a second fan drops below the legs. Chain loops hold each gingerbread man against straight side rails. Hanging loops run along the top edge and scalloped shells run along the bottom.

The pattern uses US crochet terms. The finished strip measures 7.0 in x 25.8 in (17.8 cm x 65.5 cm) without the hanging loops, or about 27.0 in (68.6 cm) with them.

You make three rectangular motifs. For each one, you crochet the gingerbread man, outline it, then build a three-round lace frame around it. Then you join the motifs into one column and add a two-round border.

Finished Size and Construction

  • Finished size: 7.0 in x 25.8 in (17.8 cm x 65.5 cm), plus 1.2 in (3.0 cm) hanging loops
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK (#3), cotton or cotton blend
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 3 framed motifs, plus 9 small buttons
  • Layout: 1 column x 3 motifs
  • Motif size: 6.2 in x 8.2 in (15.7 cm x 20.8 cm)
  • Size before border: 6.2 in x 24.6 in (15.7 cm x 62.5 cm)
  • Border depth: 0.4 in (1.0 cm) on the sides and top, 0.8 in (2.0 cm) at the bottom

Materials

Use a smooth, firm DK cotton or cotton blend. It keeps the spokes and loops crisp when the strip hangs.

  • Cream: 50 g / 110 m (frame, outlines, embroidery, border)
  • Rust brown: 30 g / 66 m (gingerbread men)
  • Burgundy: 5 g / 11 m (buttons)

Tools: 4.0 mm (G-6) hook, tapestry needle, 6 locking stitch markers, rust-proof pins, blocking mat, spray bottle, and spray starch (optional).

All quantities are for one strip and include a margin of about 20%.

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • dtr: double treble crochet
  • MR: magic ring
  • sk: skip
  • st(s): stitch(es)
  • sp: space
  • RS / WS: right side / wrong side

dtr (double treble crochet): Yarn over 3 times and insert the hook. Pull up a loop, then (yarn over, pull through 2 loops) 4 times.

fhdc (foundation half double crochet): Yarn over, insert the hook into the base of the previous stitch and pull up a loop. Yarn over and pull through 1 loop; this makes the “chain.” Then yarn over and pull through all 3 loops.

Gauge and Checkpoints

  • sc: 20 sts and 22 rows = 4 in (10.2 cm)
  • hdc: 20 sts = 4 in (10.2 cm); 10 rows = 3 in (7.6 cm)

Make one full motif first and check it at each stage:

  1. Head after Round 2: 2 in (5.1 cm) across.
  2. Arm span after Row 3: 4.4 in (11.2 cm).
  3. Gingerbread man before outlining: 4.9 in (12.4 cm) tall.
  4. After the outline: 4.8 in x 5.3 in (12.2 cm x 13.5 cm).
  5. Frame Round 2: about 5.8 in x 7.8 in (14.7 cm x 19.8 cm).
  6. Frame Round 3: 6.2 in x 8.2 in (15.7 cm x 20.8 cm).

If the motif is too big, go down 0.25–0.5 mm in hook size. If it is too small, go up. If the frame ripples, your chain loops are too loose. If it pulls inward, they are too tight.

Close-up of crocheted gingerbread man with cream chain border and burgundy buttons on wood.

Gingerbread Man (make 3)

Use rust brown.

Head

Round 1: MR, ch 3 (counts as dc), 11 dc in ring, sl st to top of ch-3. (12 dc)

Round 2: Ch 3 (counts as dc), dc in same st, 2 dc in each st around, sl st to join. (24 dc)

The join marks the bottom of the head. Do not fasten off.

Body

Row 1 (neck): Ch 1, 2 sc in same st as join, 2 sc in each of next 3 sts, turn. (8 sc) You now have 20 head sts free.

Row 2 (arms): Ch 9, hdc in 3rd ch from hook and in next 6 ch (7 hdc). Hdc in next 8 sc. Work 7 fhdc off the last st, turn. (22 hdc)

Row 3: Ch 2 (does not count here or in later rows), hdc in each st across, turn. (22 hdc)

Row 4: Sl st in first 7 sts, ch 2, hdc in next 8 sts, turn. Leave the last 7 sts unworked. (8 hdc)

Rows 5–7: Ch 2, hdc in each st across, turn. (8 hdc)

First leg

Row 8: Ch 2, 2 hdc in first st, hdc in next 2 sts, turn. Leave the rest unworked. (4 hdc)

Rows 9–10: Ch 2, hdc across, turn. (4 hdc) Fasten off.

Second leg

Row 8: Skip the 2 center sts of Row 7. Join brown in the 6th st, ch 2. Hdc in the same st and the next st, then 2 hdc in the last st, turn. (4 hdc)

Rows 9–10: Ch 2, hdc across, turn. (4 hdc) Fasten off.

Outline Round (cream)

Join cream with sc in the first skipped crotch st. Work around the shape in this order:

  • Crotch: 1 sc (the joining sc)
  • Inner leg: 2 sc in each row-end (6 sc)
  • Foot: 3 sc in first st, sc in next 2 sts, 3 sc in last st (8 sc)
  • Outer leg: 2 sc in each row-end (6 sc)
  • Body side: 2 sc in each row-end of Rows 7–4 (8 sc)
  • Underarm: sc in each of the 7 sl sts or unworked sts (7 sc)
  • Hand: 3 sc in each row-end of Rows 3 and 2 (6 sc)
  • Arm top: sc in each of the 7 foundation sts (7 sc)
  • Neck: 1 sc in the Row 1 row-end (1 sc)
  • Head: (sc in next st, 2 sc in next st) 10 times (30 sc)

Then work the second side in reverse order: neck 1, arm top 7, hand 6, underarm 7, body side 8, outer leg 6, foot 8, inner leg 6. Finish with 1 sc in the last crotch st and sl st to the first sc. (130 sc)

Each half has 65 sts: 15 head + 1 neck + 7 arm top + 6 hand + 7 underarm + 8 body + 6 outer leg + 8 foot + 6 inner leg + 1 crotch. Place markers in the 2 head sc on either side of the top center and in both crotch sc.

Decoration: With cream, make 2 French knots for eyes on Round 1 of the head and backstitch a smile below them. Then backstitch a small zigzag across each hand and foot, 0.4 in (1.0 cm) from the tip.

Buttons (make 9)

With burgundy: MR, ch 1, 6 sc in ring, pull tight, sl st to join. (6 sc) Fasten off, leaving a tail for sewing. Each button is 0.4 in (1.0 cm) across. Sew 3 down the center of each body, on Rows 3, 5 and 7.

Lace Frame (on each gingerbread man)

Use cream and work in the same direction as the outline. “Next st” always means the next outline sc.

Round 1, first half: Join with sl st in the marked head sc just past the top center. Ch 5 (counts as dtr), then (ch 1, dtr in next st) 4 times. You now have 5 top spokes.

Then make the side loops:

  • Loop A: ch 9, sk 4, sc in next st
  • Loop B: ch 9, sk 9, sc in next st
  • Loop C: ch 7, sk 6, sc in next st
  • Loop D: ch 9, sk 7, sc in next st
  • Loop E: ch 9, sk 6, sc in next st
  • Loop F: ch 9, sk 6, sc in next st
  • Loop G: ch 9, sk 4, sc in next st

Sl st in next 6 sts. Dtr in next st, then (ch 1, dtr in next st) 4 times; the last spoke lands in the crotch sc. That makes 5 bottom spokes and uses all 65 sts of this half.

Round 1, second half: Ch 1, dtr in next st (the second crotch sc), then (ch 1, dtr in next st) 4 times. Sl st in next 6 sts, then sc in next st.

Then make the side loops:

  • Loop G: ch 9, sk 4, sc in next st
  • Loop F: ch 9, sk 6, sc in next st
  • Loop E: ch 9, sk 6, sc in next st
  • Loop D: ch 9, sk 7, sc in next st
  • Loop C: ch 7, sk 6, sc in next st
  • Loop B: ch 9, sk 9, sc in next st
  • Loop A: ch 9, sk 4, dtr in next st

Finish with (ch 1, dtr in next st) 4 times, then ch 1 and sl st to the top of the ch-5.

Round 1 totals: 20 dtr, 18 ch-1 sps, 14 sc, 12 sl sts and 14 ch loops. Loop C sits at the hand, so each hand touches the side rail.

Round 2 (ladder rail): Ch 4 (counts as dc and ch 1), then (dc in next dtr, ch 1) 4 times.

  • Corner in Loop A: (dc, ch 1, dc, ch 2, dc, ch 1, dc, ch 1) in Loop A.
  • Side loops: (dc, ch 1) 3 times in each of Loops B, C, D, E and F.
  • Corner in Loop G: Work it the same way as the Loop A corner.
  • Bottom fan: (dc in next dtr, ch 1) 10 times.
  • Second half: Work the Loop G corner. Then (dc, ch 1) 3 times in each of Loops F, E, D, C and B. Work the Loop A corner.
  • Finish: (Dc in next dtr, ch 1) 5 times, then sl st to the 3rd ch of the ch-4.

Round 2 totals: 66 dc, 62 ch-1 sps and 4 corner ch-2 sps. Each short side has 14 dc (2 + 10 + 2). Each long side has 19 dc (2 + 3 + 3 + 3 + 3 + 3 + 2).

Round 3 (solid edge): Ch 1, sc in each dc and each ch-1 sp, and 3 sc in each corner ch-2 sp. Sl st to join. (140 sc) Fasten off.

The middle sc of each 3-sc corner is the corner st. Counting both corner sts, each short side has 31 sc and each long side has 41 sc. Check: 66 + 62 + (4 x 3) = 140.

Make All Pieces

Make 3 complete motifs. That takes 3 brown gingerbread men, 9 burgundy buttons and 3 cream frames.

[ Motif 1 ]   <- top, hanging loops
[ Motif 2 ]
[ Motif 3 ]   <- bottom, scallops

Joining

Place Motif 1 on Motif 2 with right sides together. Match the bottom short side of Motif 1 to the top short side of Motif 2.

With cream, sl st through the back loops of both pieces, one stitch pair at a time, from corner st to corner st. That is 31 pairs, and the ridge stays on the WS. Join Motif 2 to Motif 3 the same way.

Keep the sl sts as loose as the sc underneath, or the seam will pucker.

Checkpoint: The joined strip measures 6.2 in x 24.6 in (15.7 cm x 62.5 cm).

Border

Border gauge: 5 sc per 1 in (2.5 cm) along the edges.

Border Round 1: Join cream in any st. Sc in each st around, with 3 sc in each of the 4 outer corner sts. Add no stitches at the seams. Sl st to join. (312 sc)

  • Long sides: Each starts with 3 x 41 = 123 sts. After the corners, each has 125 sc, including both new corner sts.
  • Short sides: Each has 31 + 2 = 33 sc, including both corner sts.
  • Check: (2 x 125) + (2 x 33) − 4 shared corners = 312.

Border Round 2: Ch 1. Work 3 sc in each corner st, and work each side between the corners as follows:

  • Long sides (123 sts between corners): Sc in each st. Each long side then has 127 sc, including corners.
  • Top side (31 sts between corners): Sc in next 2 sts, (ch 14, sk 3, sc in next 9 sts) twice, ch 14, sk 3, sc in next 2 sts. That gives 22 sc and 3 hanging loops; the center loop sits over the middle stitch. With corners, the top side has 26 sc plus 3 loops.
  • Bottom side (31 sts between corners): Sc in next st, then [sk 2, (dc, ch 1) 4 times and dc all in next st, sk 2, sc in next st] 5 times. That gives 6 sc and 5 fans. With corners, the bottom side has 10 sc plus 5 fans.

Sl st to join and fasten off.

Why the math works:

  • Each long side is exactly 3 motifs x 41 sts, so the border lies flat without easing.
  • The 31 sts along the top divide as 2 + 3 + 9 + 3 + 9 + 3 + 2 = 31.
  • The 31 sts along the bottom divide as 1 + (5 x 6) = 31.

Final Blocking

  1. Weave in all ends along the sc edges.
  2. Lay the strip RS up on a blocking mat.
  3. Pin the corners to 7.0 in x 25.8 in (17.8 cm x 65.5 cm).
  4. Pin the side rails straight, with a pin every 2 in (5.1 cm).
  5. Pin each fan so its spokes radiate evenly.
  6. Open each hanging loop and pin each scallop into a rounded point.
  7. Spray until damp. Add light starch if you want a crisper hang.
  8. Let it dry completely before unpinning.

Final Quality-Control Checklist

  • 3 motifs, each 6.2 in x 8.2 in (15.7 cm x 20.8 cm)
  • Each outline has 130 sc and each frame edge has 140 sc
  • 10 top spokes and 10 bottom spokes per motif
  • Each gingerbread man has 3 buttons, 2 eyes, a smile and 4 icing zigzags
  • Both seams are flat, with 31 sl sts each
  • Each long side has 127 sc after Border Round 2
  • 3 hanging loops and 5 scallops
  • Strip measures 7.0 in x 25.8 in (17.8 cm x 65.5 cm)

Troubleshooting

  • Head cups: Make sure the outline has 30 sc on the head.
  • Arms curl: Keep the fhdc loose, then block flat.
  • Spokes lean: Pull the first loop of each dtr up to full height.
  • Frame is lopsided: Recount the skipped sts, checking that each half adds up to 65.
  • Long side is short: Make sure each side loop got 3 dc in Round 2.
  • Scallops flare: Work the border with a hook 0.5 mm smaller.

Care

Hand wash in cool water, roll in a towel and dry flat. Re-starch and re-block if the lace loses its shape.

Crocheted gingerbread door panel in cream and rust hanging from wooden rod in festive holiday room.

Final Notes

The measurements build in this order:

  • Head: 2 in (5.1 cm)
  • Outlined gingerbread man: 4.8 in x 5.3 in (12.2 cm x 13.5 cm)
  • Motif: 6.2 in x 8.2 in (15.7 cm x 20.8 cm)
  • Joined column: 6.2 in x 24.6 in (15.7 cm x 62.5 cm)
  • Bordered strip: 7.0 in x 25.8 in (17.8 cm x 65.5 cm)

Check each stage before moving on, and the strip will hang straight. For a doorway curtain, make several strips and hang them side by side.

Happy crocheting!

Leave a Comment