The Golden Bloom Star is a lacy five-point ornament in warm mustard gold and soft cream. A small gold ring sits at the center, surrounded by five cream petals. Larger cream fans fill each star point, and a gold frame with a twisted rope edge holds the whole star in shape.
The two-color palette looks vintage and cozy. It reads as “gold star” from across the room and as fine lace up close. It looks lovely on a tree, tied to a gift, or hung in a window.
This pattern uses US crochet terms. The finished star measures 4.5 in (11.4 cm) from tip to tip. The hanging loop adds about 1.5 in (3.8 cm).
The star is worked in the round as one piece, using six rounds:
- Rounds 1–2: the center ring and petals.
- Round 3: the gold spokes and chain spaces.
- Round 4: the cream point fans.
- Round 5: the gold star frame.
- Round 6: the reverse single crochet rope border.
A chain hanging loop is added at the end. There is no sewing and no joining.
Finished Size and Construction
- Finished size: 4.5 in (11.4 cm) tip to tip, without the loop
- Hanging loop: about 1.5 in (3.8 cm) long
- Skill level: Easy-Intermediate (spike stitch and reverse single crochet)
- Terminology: US
- Yarn weight: DK / light (3), cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 1
- Layout: single standalone motif
- Piece size: 4.5 in (11.4 cm) tip to tip
- Size before border: 4.25 in (10.8 cm) tip to tip, after Round 5
- Border depth: about 0.125 in (0.3 cm) on each side
Materials
Yarn: Use a smooth, mercerized DK-weight cotton or a cotton blend. Cotton gives crisp stitch definition, keeps the fans neat, and blocks into a sharp star. Avoid fuzzy or very stretchy yarns, because the points will soften.
- Color A, mustard gold: 8 g / 18 m (about 20 yd)
- Color B, cream: 5 g / 12 m (about 13 yd)
Tools:
- 3.5 mm (E-4) crochet hook
- Tapestry needle
- Scissors
- Stitch marker
- Rustproof pins and a blocking mat or foam board
- Spray bottle
- Ruler or tape measure
All yarn quantities include a small margin for swatching and joining tails. One small ball of each color will make several stars.
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sk: skip
- sp: space
- st(s): stitch(es)
- MR: magic ring
- rep: repeat
- rev sc: reverse single crochet
- Ssc: spike single crochet (see below)
Spike single crochet (Ssc): Insert your hook through the ch-1 space of Round 2 and down into the gap between the two Round 1 sc directly below it. Yarn over and pull up a long loop to the height of the current round. Yarn over and pull through both loops on the hook. This makes the gold spoke that runs from the center ring out between two petals.
Reverse single crochet (rev sc, also called crab stitch): Work from left to right (right-handed). Insert your hook into the next stitch to the right, yarn over, and pull up a loop. Yarn over and pull through both loops on the hook.
Standing sc: Start with a slip knot already on your hook, then work a sc as usual. This lets you join a new color without a chain.
Gauge and Checkpoints
Exact gauge is not critical for an ornament, but it controls the size and how crisp the points are. Make one test star first and check it against these measurements. Measure lightly flattened and unblocked.
- After Round 1: 0.6 in (1.5 cm) across
- After Round 2: 1.75 in (4.4 cm) across
- After Round 3: 2.25 in (5.7 cm) across
- After Round 4: 3.5 in (8.9 cm) across, from fan top to fan top
- After Round 5: 4.25 in (10.8 cm) from tip to tip
- After Round 6: 4.5 in (11.4 cm) from tip to tip
If your star is too big (more than 0.25 in / 0.6 cm over at Round 2), go down to a 3.25 mm hook or tighten the loops you pull up.
If it is too small, or the fans cup, go up to a 3.75 mm hook.
If Round 3 ruffles, your chains are too loose, so shorten them slightly. If Round 3 pulls tight, your chains are too tight, so relax them.

Pattern
Round 1: Center Ring (Color A, gold)
MR, ch 1, work 10 sc into the ring. Pull the ring closed tightly. Sl st to the first sc to join. (10 sc)
Fasten off and leave a 4 in (10.2 cm) tail.
Checkpoint: 0.6 in (1.5 cm) across.
Round 2: Petals (Color B, cream)
Join cream with a sl st in any sc.
Ch 3 (counts as dc). Work 2 dc in the same st, 3 dc in the next sc, ch 1.
3 dc in the next sc, 3 dc in the next sc, ch 1. Rep from * 3 more times.
Sl st to the top of the beginning ch-3. (30 dc: 5 petals of 6 dc each, plus 5 ch-1 sps)
Fasten off.
Each petal is worked over two Round 1 stitches, so the 10 sc split evenly into 5 petals. The ch-1 spaces mark where the gold spokes will go.
Checkpoint: 1.75 in (4.4 cm) across.
Round 3: Spokes and Tip Spaces (Color A, gold)
Make a slip knot on your hook and work an Ssc into any ch-1 space (this joins the gold).
Ch 2, sk 2 dc, sc in the next dc (3rd dc of the petal), ch 5, sc in the next dc (4th dc of the petal), ch 2, sk the last 2 dc of the petal, Ssc in the next ch-1 space. Rep from * 3 more times.
Ch 2, sk 2 dc, sc in the next dc, ch 5, sc in the next dc, ch 2, sk 2 dc. Sl st to the first Ssc.
Stitch count:
- 15 sc: 5 Ssc plus 10 regular sc
- 10 ch-2 spaces
- 5 ch-5 tip spaces
Fasten off.
The five Ssc form the gold spokes. Each ch-5 sits at the center of a petal and will anchor the fan for one star point.
Checkpoint: 2.25 in (5.7 cm) across.
Round 4: Point Fans (Color B, cream)
Join cream with a standing sc in any Ssc.
9 dc in the next ch-5 sp, skipping the ch-2 sp and sc before it. Sk the next sc and ch-2 sp, then sc in the next Ssc. Rep from * 3 more times.
9 dc in the last ch-5 sp. Sl st to the first sc. (45 dc: 5 fans of 9 dc each, plus 5 valley sc = 50 sts)
Fasten off.
Because the ch-2 spaces are skipped, small open gaps form at the base of each fan. These become the lacy openings near the star valleys.
Checkpoint: 3.5 in (8.9 cm) across, from fan top to fan top.
Round 5: Star Frame (Color A, gold)
In this round the stitches get taller from each valley up to the point, which pulls the outline into a star.
Join gold with a standing sc in any valley sc.
Ch 2, sk the first 2 dc of the fan. Sc in the 3rd dc, hdc in the 4th dc, (dc, ch 3, dc) in the 5th (center) dc, hdc in the 6th dc, sc in the 7th dc. Ch 2, sk the last 2 dc of the fan, sc in the next valley sc. Rep from * 3 more times.
For the last point, work the repeat but end with ch 2 and a sl st to the first sc instead of the final valley sc.
Stitch count for each point:
- 7 sts: valley sc, sc, hdc, dc, dc, hdc, sc
- 2 ch-2 spaces
- 1 ch-3 tip
Round total: 35 sts, 10 ch-2 spaces, 5 ch-3 tips. Do not fasten off.
Checkpoint: 4.25 in (10.8 cm) from tip to tip. The points should already look clearly defined.
Round 6: Rope Border (Color A, gold)
Border gauge: about 4 rev sc per 1 in (2.5 cm) along the edge.
Ch 1. Working from left to right:
- 1 rev sc in each sc, hdc, and dc
- 2 rev sc in each ch-2 space
- 3 rev sc in each ch-3 tip
Sl st to the first rev sc.
This is a trim round, so count it as stitches worked one-per-existing-stitch plus stitches worked into spaces:
- One per stitch: 35 rev sc
- Into spaces: 20 rev sc (2 in each of 10 ch-2 spaces) + 15 rev sc (3 in each of 5 ch-3 tips) = 35 rev sc
- Round total: 35 + 35 = 70 rev sc
Each point gets 14 rev sc: 7 into the stitches, 4 into its two ch-2 spaces, and 3 into its tip.
Why the math works: Every point has the same 14 stitches, laid out evenly:
- Valley: 1
- Rising side: 2 (ch-2 sp) + 3 (sc, hdc, dc) = 5
- Tip: 3
- Falling side: 3 (dc, hdc, sc) + 2 (ch-2 sp) = 5
That adds up to 1 + 5 + 3 + 5 = 14. Each side of a point has the same number of stitches, so all five points come out the same size and stay symmetrical. The 3 stitches at the tip give the border enough room to turn a sharp corner without cupping. The valleys get only 1 stitch, which keeps the inner angles crisp.
Fasten off.
Checkpoint: 4.5 in (11.4 cm) from tip to tip.
Hanging Loop (Color A, gold)
Choose a point to be the top. Join gold with a sl st in the center rev sc of its tip.
Ch 20, then sl st in the same st. Sl st in each ch around the loop for a firmer, cord-like finish (20 sl sts). Sl st into the starting st again.
Fasten off. The loop hangs about 1.5 in (3.8 cm) above the tip.
Weave in all ends inside stitches of the same color. Hide cream tails in the cream fans and gold tails in the frame.
Final Blocking
- Lightly spray the star with water until it is evenly damp, not dripping.
- Lay it right side up on a blocking mat.
- Pin the center ring first so the star stays centered.
- Pin each of the 5 tips outward to a 4.5 in (11.4 cm) tip-to-tip span. Measure across opposite points; each point should sit about 2.25 in (5.7 cm) from the center.
- Pin each valley inward slightly so the star edges run straight from valley to tip.
- Gently open the gaps at the base of each fan with your fingertip.
- Lay the hanging loop out straight.
- Let the star dry completely, about 4–6 hours.
- For a stiffer ornament, use a light spray starch or a diluted fabric stiffener before drying.
Final Quality-Control Checklist
- All 5 points are the same length, within 0.125 in (0.3 cm).
- Tip-to-tip span is 4.5 in (11.4 cm).
- The center ring is closed tightly, with no hole showing.
- All 5 gold spokes run straight between the petals.
- Each fan has 9 dc and sits centered in its point.
- The valley openings are visible and evenly sized.
- The rope border is continuous, with 70 rev sc.
- The hanging loop is at the top point and holds firmly.
- All ends are woven in and invisible from both sides.
Troubleshooting
The star cups or domes. Your stitches are too tight in Round 4 or Round 5. Go up a hook size for those rounds, or block more firmly.
The star ruffles or waves. Your chains in Round 3 are too loose. Rework the round with snugger chains.
The points are dull or rounded. Make sure you worked (dc, ch 3, dc) at the tip in Round 5 and 3 rev sc into each tip in Round 6. Pin the tips sharply when blocking.
The spike stitches look sloppy. Pull the long loop up to the full round height before finishing the stitch, so the spoke lies flat.
The rev sc border twists unevenly. Keep your loops the same size and do not over-tighten. Rev sc naturally tightens the edge.
The stitch count is off. Recount each fan (it should be 9 dc) and each point in Round 5 (it should be 7 sts) before you start the border.
Care
Hand wash gently in cool water, press out the water in a towel, and reshape flat to dry. Store the stars flat between tissue paper so the points stay crisp.

Final Notes
The measurement chain is simple:
- Round 1 (10 sc): 0.6 in (1.5 cm)
- Round 2 (5 petals): 1.75 in (4.4 cm)
- Round 3 (15 sc plus chain spaces): 2.25 in (5.7 cm)
- Round 4 (5 fans of 9 dc): 3.5 in (8.9 cm)
- Round 5 (35-stitch frame): 4.25 in (10.8 cm)
- Round 6 (70 rev sc): 4.5 in (11.4 cm)
The hanging loop adds 1.5 in (3.8 cm). If each checkpoint matches, the finished star will too. Make one, then make a whole tree’s worth.
Happy crocheting!