This holiday bag holder is a tall, open diamond-mesh tube in cream yarn. It hangs from a yarn-covered ring and dispenses plastic grocery bags through a smaller opening at the bottom. A layered appliqué on the front shows a red sleigh with gold trim, gold runners, two wrapped gifts, holly leaves and red berries.
The colors are cream, red, green and gold, a traditional look that suits most kitchens. The same pattern also works in light blue. All terms are US crochet terms.
The finished holder measures 18 in (45.7 cm) long and 6 in (15.2 cm) wide flat. With the tab and ring it hangs 23 in (58.4 cm).
The body is worked in the round from the top down: a solid band, a chain-loop mesh, then a narrower bottom band. The ring cover, tab and appliqué parts are made separately and sewn on.
Finished Size and Construction
- Finished size: 18 in (45.7 cm) long x 6 in (15.2 cm) wide flat at the top, 5 in (12.7 cm) wide flat at the bottom
- Hanging length: 23 in (58.4 cm), including the tab and ring
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: Worsted (#4)
- Hooks: 5.0 mm (H-8) for the body; 4.0 mm (G-6) for the appliqués
- Number of pieces: 1 holder body, 1 covered ring, 1 tab, plus 13 small appliqué parts sewn into one motif
- Layout: Single tube, with the motif centered on the front
- Body size before border: 16 in (40.6 cm) long, 12 in (30.5 cm) around
- Border depth: 0.5 in (1.3 cm) at the top rim and 1.5 in (3.8 cm) at the bottom band
Materials
Use a smooth worsted cotton or cotton blend. Cotton keeps its shape when the holder is full of bags and makes the mesh stand out. The amounts below assume about 180 m per 100 g.
- Cream (main color): 100 g, 180 m
- Red: 15 g, 27 m
- Green: 10 g, 18 m
- Gold: 15 g, 27 m
These amounts include about 15 percent extra for swatching and tails.
Tools:
– 5.0 mm (H-8) and 4.0 mm (G-6) crochet hooks
– 3 in (7.6 cm) plastic or metal ring
– Stitch markers
– Tapestry needle
– Pins and a blocking mat
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sc2tog: single crochet 2 together
- rev sc: reverse single crochet (crab stitch), worked from left to right
- st(s): stitch(es)
Picot: Ch 3, then sl st in the 3rd ch from the hook.
Ch-5 loop: The ch-5 space that forms each side of a diamond in the mesh.
Gauge and Checkpoints
Body gauge (5.0 mm hook): 16 sc and 16 rounds = 4 in (10.2 cm) in sc worked in the round. In the mesh, 4 ch-5 loops span 3 in (7.6 cm) across, and 4 mesh rounds measure 3 in (7.6 cm) tall.
Appliqué gauge (4.0 mm hook): 18 sc and 20 rows = 4 in (10.2 cm).
Make the top band first and use it as your test piece. Measure at each of these stages:
- After the top band (4 rounds): 12 in (30.5 cm) around, 6 in (15.2 cm) flat and 1 in (2.5 cm) tall.
- After Mesh Round 8: 7 in (17.8 cm) from the starting chain.
- After Mesh Round 20: 16 in (40.6 cm) from the starting chain.
- After the bottom band: 5 in (12.7 cm) flat.
If the band is wider than 6 in (15.2 cm), go down one hook size. If it’s narrower, go up one size. Don’t change the stitch count, because the mesh repeat depends on 48 stitches.

Holder Body
Use cream and the 5.0 mm hook. Join each round with a sl st unless told otherwise. Don’t turn.
Top Band
Foundation: Ch 48 and sl st in the first ch to form a ring, without twisting the chain.
Round 1: Ch 1, sc in each ch around, join. (48 sc)
Place a marker in the first st to mark the side fold. Stitches 1–24 are the front and stitches 25–48 are the back.
Rounds 2–4: Ch 1, sc in each st around, join. (48 sc)
The band measures 1 in (2.5 cm) tall.
Diamond Mesh
Mesh Round 1: Ch 1, sc in the first st, ch 5, skip 2 sts, sc in the next st; repeat from * 14 more times. Ch 2, skip the last 2 sts, dc in the first sc. (16 ch-5 loops)
The ch-2 and dc together form the 16th loop and leave your hook in the middle of that loop.
Mesh Rounds 2–19: Ch 5, sc in the next ch-5 loop; repeat from * 14 more times. Ch 2, dc in the top of the joining dc. (16 ch-5 loops)
Mesh Round 20: Ch 5, sc in the next ch-5 loop; repeat from * 14 more times. Ch 5, sl st in the top of the joining dc. (16 ch-5 loops)
This round closes with a full ch-5 so the edge is even for the bottom band. Each mesh round adds 0.75 in (1.9 cm), so the 20 rounds measure 15 in (38.1 cm). The body now measures 16 in (40.6 cm).
Hanging Ring and Tab
Ring Cover
With cream and the 5.0 mm hook, join the yarn to the ring with a sl st. Work 50 sc around the ring, packed tightly so none of the ring shows. Join and fasten off. (50 sc) The covered ring measures 3.5 in (8.9 cm) across.
Tab
With cream and the 5.0 mm hook, ch 7.
Row 1: Sc in the 2nd ch from the hook and in each ch across, turn. (6 sc)
Rows 2–12: Ch 1, sc in each st across, turn. (6 sc)
Fasten off, leaving a 12 in (30.5 cm) tail. The tab measures 1.5 in (3.8 cm) wide and 3 in (7.6 cm) long.
Sleigh Appliqué
Use the 4.0 mm hook for every appliqué part. Leave 8 in (20.3 cm) tails for sewing.
Sleigh Body (Red)
Ch 15.
Row 1: Sc in the 2nd ch from the hook and in each ch across, turn. (14 sc)
Row 2: Ch 1, 2 sc in the first st, sc in the next 12 sts, 2 sc in the last st, turn. (16 sc)
Row 3: Ch 1, 2 sc in the first st, sc in the next 14 sts, 2 sc in the last st, turn. (18 sc)
Rows 4–6: Ch 1, sc in each st across, turn. (18 sc)
Back, Row 7: Ch 1, sc in the first 6 sts, turn, leaving the remaining sts unworked. (6 sc)
Back, Rows 8–10: Ch 1, sc in each st across, turn. (6 sc)
Back, Row 11: Ch 1, sc2tog, sc in the next 2 sts, sc2tog. (4 sts) Fasten off.
Front, Row 7: Skip the 8 center sts of Row 6, which form the low seat. Join red in the next st, ch 1, and sc in that st and the last 3 sts, turn. (4 sc)
Front, Row 8: Ch 1, sc in each st across. (4 sc) Fasten off.
The back is 11 rows high and the front is 8 rows high, which gives the sleigh a tall back and a lower front.
Gold Edging
Join gold at a bottom corner. Work 1 sc in each st and each row end around the whole sleigh body. Work 3 sc in each of the 4 outer corners: the 2 bottom corners and the outer top corners of the back and front. Join.
Count: 14 (bottom) + 11 (outer back) + 4 (top of back) + 5 (inner back) + 8 (seat) + 2 (inner front) + 4 (top of front) + 8 (outer front) = 56, plus 2 extra sc at each of the 4 corners = 64 sc. The edged sleigh measures 4.5 in (11.4 cm) wide x 2.75 in (7.0 cm) tall.
Scroll Curls (Gold, Make 2)
Ch 9. Work 3 sc in the 2nd ch from the hook and in each ch across. (24 sc) The strip twists into a spiral on its own.
Runner (Gold)
Ch 31. Sc in the 2nd ch from the hook and in the next 21 ch, then work 3 sc in each of the last 8 ch. (22 + 24 = 46 sc) The end with the extra stitches curls up to form the front tip. The straight section measures 5 in (12.7 cm).
Struts (Gold, Make 2)
Ch 6. Sl st in the 2nd ch from the hook and in each ch across. (5 sl st) Each strut measures 1 in (2.5 cm).
Gifts, Holly and Berries
Green Gift
With green, ch 9.
Row 1: Sc in the 2nd ch from the hook and in each ch across, turn. (8 sc)
Rows 2–9: Ch 1, sc in each st across, turn. (8 sc) Fasten off.
With gold, work surface sl sts for the ribbon: one vertical line between sts 4 and 5, and one horizontal line along Row 5. Bow: Join gold at the top center and work (ch 6, sl st in the same st) twice. Fasten off. The gift is 1.75 in (4.4 cm) square.
Gold Gift
With gold, ch 8.
Row 1: Sc in the 2nd ch from the hook and in each ch across, turn. (7 sc)
Rows 2–8: Ch 1, sc in each st across, turn. (7 sc) Fasten off.
With red, work surface sl sts for the ribbon: one vertical line through st 4 and one horizontal line along Row 4. Make the bow the same way as on the green gift. The gift is 1.5 in (3.8 cm) square.
Holly Leaves (Green, Make 2)
Ch 10.
Side 1: Sc in the 2nd ch from the hook, hdc in the next ch, dc in the next ch, picot, dc in the next 2 ch, picot, hdc in the next ch, sc in the next 2 ch. Work (sc, ch 2, sc) in the last ch to form the tip.
Side 2: Turn the piece and work into the free loops of the chain: sc in the next 2 ch, hdc in the next ch, picot, dc in the next 2 ch, picot, dc in the next ch, hdc in the next ch, sc in the last ch. Sl st in the first sc and fasten off.
Each side has 9 sts and 2 picots, so the leaf is symmetrical. It measures 2 in (5.1 cm) long.
Berries (Red, Make 3)
Round 1: Make a magic ring and work 6 sc into it. (6 sc)
Round 2: Sc2tog 3 times. (3 sts)
Fasten off, thread the tail through the stitches and pull the berry closed. Each berry measures 0.5 in (1.3 cm).
Assemble the Motif
Sew the motif together in layers, from back to front:
- Gifts: Place the green gift on the left and the gold gift on the right, overlapping the green gift by 0.25 in (0.6 cm). Sew them together.
- Sleigh: Place the sleigh body over the lower third of both gifts so the gifts look like they’re sitting inside. Sew around the gold edging.
- Curls: Sew one curl to the outer top corner of the back and the other to the outer top corner of the front.
- Runner: Place the runner 1 in (2.5 cm) below the sleigh, with the curled tip under the front. Sew the 2 struts upright between the bottom of the sleigh and the runner, 2 in (5.1 cm) apart.
- Holly: Sew the 2 leaves in a V on the front half of the sleigh body. Sew the 3 berries in a cluster where the leaves meet.
The finished motif measures 5 in (12.7 cm) wide x 5 in (12.7 cm) tall.
Border
Border gauge: 16 sc = 4 in (10.2 cm), so 4 sc = 1 in (2.5 cm).
Top Rim
Hold the body with the foundation chain at the top. Join cream in the free loop of the chain at the marker.
Round 1: Ch 1, sc in each free loop of the foundation chain around, join. (48 sc, 24 per flat side)
Round 2: Ch 1, rev sc in each st around, join. (48 rev sc) Fasten off.
The rev sc round gives the rim its rolled edge. These 2 rounds add 0.5 in (1.3 cm).
Bottom Band
Join cream in any ch-5 loop of Mesh Round 20.
Round 1 (conversion): Ch 1, 3 sc in the next loop, 2 sc in the next loop; repeat from * around, join. (16 loops x 2 sc = 32, plus 8 extra = 40 sc, 20 per flat side)
Rounds 2–6: Ch 1, sc in each st around, join. (40 sc) Fasten off.
Why the math works: At the top, 24 sts per flat side at 4 sts per inch gives 6 in (15.2 cm). At the bottom, 20 sts at 4 sts per inch gives 5 in (12.7 cm). The narrower opening keeps the bags inside but still lets one pull through. The 6 band rounds measure 1.5 in (3.8 cm), so the total length is 16 + 0.5 + 1.5 = 18 in (45.7 cm).
Final Blocking
- Weave in all ends on the body and the appliqué parts.
- Soak the body and the motif in cool water for 10 minutes. Press out the water in a towel without wringing.
- Slide a rolled towel or cardboard tube inside the body. Shape it to 6 in (15.2 cm) wide flat and 18 in (45.7 cm) long, gently pulling the mesh lengthwise so the diamonds open evenly.
- Pin the motif flat to 5 in (12.7 cm) square and roll the curls around a pencil.
- Let everything dry completely.
- Attach the tab: Wrap 1 in (2.5 cm) of the tab over the bottom of the ring and whipstitch it in place. Sew the other end 0.5 in (1.3 cm) inside the back top band over sts 34–39, which are centered on the back. You should see 1.5 in (3.8 cm) of tab between the rim and the ring.
- Attach the motif: Center the motif on the front with the top of the gifts 4 in (10.2 cm) below the rim. Sew through the mesh strands of the front layer only.
Final Quality-Control Checklist
- The top measures 6 in (15.2 cm) flat and the bottom measures 5 in (12.7 cm) flat.
- The body is 18 in (45.7 cm) long.
- All 20 mesh rounds have 16 loops.
- The top rim has 48 sts and the bottom band has 40.
- The ring is completely covered.
- The tab is centered on the back.
- The motif is centered, flat and sewn to the front layer only.
- No tails are visible.
Troubleshooting
Mesh twists into a spiral: This is normal when you work continuous rounds. Block the body straight and keep the joining dc snug.
Diamonds are uneven: Count each chain; every loop must have exactly 5 ch.
Bottom opening is too loose: Work Round 1 of the bottom band with a 4.5 mm hook.
Appliqué puckers the mesh: Sew with looser stitches, and keep one hand inside the holder so you don’t catch the back layer.
Curls unwind: Wet them again, roll them around a pencil and let them dry.
Care
Hand wash in cool water and lay flat to dry. Reshape the curls while they’re damp.

Final Notes
The measurements build on each other. The top band has 48 sts, which is 12 in (30.5 cm) around and 6 in (15.2 cm) flat. Twenty mesh rounds of 16 loops add 15 in (38.1 cm). The 40-st bottom band narrows the holder to 5 in (12.7 cm). With the borders, the body is 18 in (45.7 cm) long, and with the tab and ring it hangs 23 in (58.4 cm).
Happy crocheting!