Holiday Squirrel Grocery Bag Holder Crochet Pattern

This Holiday Squirrel Grocery Bag Holder is a tall, egg-shaped mesh tube that hangs from a covered ring. You push plastic bags in at the top and pull them out through an oval opening at the bottom. The open diamond mesh shows how full it is at a glance.

The body is cream. On the front sits a rust-brown squirrel in a red-and-white Santa hat, holding a mustard-gold acorn with a dark-brown cap, between two green holly sprigs with red berries. The style is cozy farmhouse Christmas.

This pattern uses US crochet terms. The finished body is 7 in (17.8 cm) wide and 13.5 in (34.3 cm) tall. With the strap and ring, it hangs about 18 in (45.7 cm) long.

You’ll work the body in one piece from the bottom up: first a solid rim, then chain-space mesh rounds that flare out and narrow back in, then a single crochet top band. Then you’ll cover a ring, make a strap, and sew on the appliqués.

Finished Size and Construction

  • Finished size: 7 in (17.8 cm) x 13.5 in (34.3 cm) body; about 18 in (45.7 cm) hanging length
  • Skill level: Intermediate
  • Terminology: US terms
  • Yarn weight: Worsted (#4) cotton
  • Hooks: H/5.0 mm (body, ring, strap); G/4.0 mm (appliqués)
  • Number of pieces: 1 body, 1 ring cover, 1 strap, plus appliqués (squirrel, hat, acorn, 4 holly leaves, 6 berries)
  • Layout: Single holder; appliqués centered on the front
  • Body size before border: 7 in (17.8 cm) x 12.5 in (31.8 cm) (Rnds 1–19)
  • Border depth: 0.75 in (1.9 cm) at the top, 0.25 in (0.6 cm) at the bottom
  • Openings (flat): bottom 4 in (10.2 cm), top 6 in (15.2 cm)

Materials

Use a smooth worsted-weight cotton or cotton blend. Cotton keeps the mesh open and won’t sag under the weight of the bags. The amounts below assume about 85 yd (78 m) per 50 g.

  • Cream: 75 g / 117 m (body, ring, strap, belly, face)
  • Rust brown: 15 g / 23 m
  • Red: 8 g / 12 m
  • White: 3 g / 5 m
  • Green: 6 g / 9 m
  • Mustard gold: 3 g / 5 m
  • Dark brown: 2 g / 3 m
  • Black: 1 m yarn or floss

All quantities include a margin of about 15 percent.

Tools: H/5.0 mm and G/4.0 mm hooks, a 3 in (7.6 cm) plastic or wooden ring, a tapestry needle, a stitch marker, pins, a measuring tape, and a spray bottle.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • sp(s) – space(s)
  • rnd(s) – round(s)
  • rep – repeat
  • st(s) – stitch(es)

Reverse sc (crab stitch): Work from left to right (if you’re right-handed). Insert the hook into the next stitch to the right, pull up a loop, yarn over, and draw through both loops. This makes a rounded, corded edge.

Picot: Ch 2, sl st in 2nd ch from hook.

Gauge and Checkpoints

  • Sc gauge (H/5.0 mm): 16 sc and 16 rows = 4 in (10.2 cm).
  • Mesh gauge (H/5.0 mm): 4 ch-6 loops = 3.5 in (8.9 cm) measured around the tube; 4 mesh rnds = 3 in (7.6 cm) tall.
  • Appliqué gauge (G/4.0 mm): squirrel head = 1.5 in (3.8 cm) across.

Treat Rnds 1–5 as your test piece. If those measure correctly, the rest will follow.

Checkpoints:

  • After Rnd 1: the flattened rim is 4 in (10.2 cm) across (32 sc = 8 in / 20.3 cm around).
  • After Rnd 5: 2.25 in (5.7 cm) tall.
  • After Rnd 17: 11.25 in (28.6 cm) tall and 7 in (17.8 cm) wide when flat.
  • After Rnd 19: 12.5 in (31.8 cm) tall.
  • After the border: 13.5 in (34.3 cm) tall.

If your piece is too big: go down one hook size, or use ch-5 instead of ch-6 in Rnds 6–17.

If your piece is too small: go up one hook size and relax your chains. Tight chains are the most common cause of a narrow mesh.

Brown crocheted squirrel wearing red and white Santa hat with yellow acorn on cream cable-knit backdrop.

Body

Work in joined rounds and don’t turn. Use the H/5.0 mm hook and cream.

Foundation: Ch 32 and sl st to the first ch to form a ring, taking care not to twist the chain.

Rnd 1: Ch 1, sc in each ch around, sl st to first sc. (32 sc)

Rnd 2: Ch 1, sc in each sc around, sl st to first sc. (32 sc)

The rim is now 0.5 in (1.3 cm) tall.

Rnd 3 (conversion to mesh): Ch 1, sc in first sc, *ch 3, skip next sc, sc in next sc; rep from * 14 more times, ch 3, skip last sc, sl st to first sc. (16 sc, 16 ch-3 sps)

Mesh round (use for Rnds 4–19): Sl st into first sp, ch 1, sc in same sp, *ch X, sc in next sp; rep from * 14 more times, ch X, sl st to first sc. (16 sc, 16 ch-X sps)

Replace X with the chain count for each round:

  • Rnd 4: X = 4 (16 ch-4 sps)
  • Rnd 5: X = 5 (16 ch-5 sps)
  • Rnds 6–17: X = 6 (16 ch-6 sps in each rnd)
  • Rnd 18: X = 5 (16 ch-5 sps)
  • Rnd 19: X = 4 (16 ch-4 sps)

Every round has 16 loops. The body widens and narrows only by changing the chain length, so the diamonds stay in straight diagonal columns. The longer chains make the body bulge in the middle, and the shorter chains at the top pull it back into an egg shape.

Don’t fasten off. Continue to the border once the appliqués are made, or set the body aside on a stitch marker.

Covered Ring and Strap

Ring: Use the H/5.0 mm hook and cream. Work about 60 sc over the ring, packing them tightly so no ring shows; add or remove stitches if you need to. Sl st to the first sc and fasten off. The covered ring is about 3.5 in (8.9 cm) across.

Strap: Ch 9.

Row 1: Sc in 2nd ch from hook and in each ch across. (8 sc)

Rows 2–14: Ch 1, turn, sc in each sc. (8 sc)

Fasten off with a long tail. The strap measures 2 in (5.1 cm) x 3.5 in (8.9 cm).

Appliqués

Use the G/4.0 mm hook for all appliqués, and leave long tails for sewing.

Squirrel

Body (rust): Ch 7.

Rnd 1: 3 sc in 2nd ch from hook, sc in next 4 ch, 3 sc in last ch. Working along the other side of the chain, sc in next 4 ch, sl st to first sc. (14 sc)

Rnd 2: Ch 1, 2 sc in each of next 3 sts, sc in next 4, 2 sc in each of next 3 sts, sc in next 4, sl st to first sc. (20 sc)

Rnd 3: Ch 1, *(sc in next st, 2 sc in next st) 3 times, sc in next 4; rep from * once, sl st to first sc. (26 sc)

Head (rust): Make a magic ring.

Rnd 1: 6 sc in ring. (6 sc)

Rnd 2: 2 sc in each st. (12 sc)

Rnd 3: (Sc in next st, 2 sc in next st) 6 times. (18 sc)

Ear: Sl st in next st, (hdc, dc, picot, hdc) in next st, sl st in next st. Fasten off.

Tail (rust): Ch 26.

Row 1: Sl st in 2nd ch from hook, sc in next 3 ch, hdc in next 5 ch, dc in next 8 ch, 2 dc in each of last 8 ch. (1 sl st + 3 sc + 5 hdc + 8 dc + 16 dc = 33 sts)

Row 2: Ch 1, turn, sc in each st. (33 sc)

Roll the narrow end inward about 1.5 turns into a spiral and tack it in place. The tail is about 3 in (7.6 cm) tall.

Belly (cream): Ch 5.

Rnd 1: 3 sc in 2nd ch from hook, sc in next 2 ch, 3 sc in last ch. Working along the other side of the chain, sc in next 2 ch, sl st to first sc. (10 sc)

Rnd 2: Ch 1, 2 sc in each of next 3 sts, sc in next 2, 2 sc in each of next 3 sts, sc in next 2, sl st to first sc. (16 sc)

Face patch (cream): Magic ring, 7 sc in ring, sl st to first sc. (7 sc)

Put the squirrel together:

  1. Sew the belly to the front of the body oval.
  2. Sew the face patch to the lower front of the head.
  3. Satin-stitch a black eye and make one straight stitch for the nose.
  4. Sew the head to the top of the body.
  5. Stitch the wide end of the tail behind the body.

The finished squirrel is about 4 in (10.2 cm) square.

Santa Hat

Hat (red): Ch 11.

Row 1: Sc in 2nd ch from hook and across. (10 sc)

Row 2: Ch 1, turn, sc2tog, sc in next 6, sc2tog. (8 sc)

Row 3: Ch 1, turn, sc across. (8 sc)

Row 4: Ch 1, turn, sc2tog, sc in next 4, sc2tog. (6 sc)

Row 5: Ch 1, turn, sc across. (6 sc)

Row 6: Ch 1, turn, sc2tog, sc in next 2, sc2tog. (4 sc)

Row 7: Ch 1, turn, sc across. (4 sc)

Row 8: Ch 1, turn, sc2tog twice. (2 sc)

Row 9: Ch 1, turn, sc2tog. (1 sc)

Fasten off.

Brim (white): Join to the foundation chain.

Rows 1–2: Ch 1, sc in each st across, turning at the start of Row 2. (10 sc)

Pompom (white): Magic ring, 7 sc in ring, pull the ring tight, sl st to first sc. Sew the pompom to the tip, then fold the tip to one side and tack it down.

Acorn

Nut (mustard gold): Magic ring.

Rnd 1: 6 sc in ring. (6 sc)

Rnd 2: 2 sc in each st, sl st to first sc. (12 sc)

Cap (dark brown): Join to any st of Rnd 2.

Row 1: Ch 1, sc in same st, 2 sc in each of next 3 sts, sc in next st. (8 sc)

Row 2: Ch 1, turn, sc across. (8 sc)

Stem: Ch 3, sl st in 2nd and 3rd ch from hook. Fasten off.

Holly Leaves (make 4, green)

Ch 10.

Side 1: Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, picot, dc in next 2 ch, picot, hdc in next 2 ch, picot, sc in next ch.

Tip: (Sc, picot, sc) in last ch.

Side 2: Working along the other side of the chain, sc in next ch, picot, hdc in next 2 ch, picot, dc in next 2 ch, picot, hdc in next ch, sc in next ch, sl st in last ch.

Fasten off. Each leaf is about 2 in (5.1 cm) long, with 3 points per side.

Berries (make 6, red)

Magic ring, 6 sc in ring, pull the ring tight, sl st to first sc. (6 sc)

Border

The border follows the sc gauge: 16 sc = 4 in (10.2 cm). Continue from Rnd 19 with the H/5.0 mm hook and cream.

Rnd 20 (conversion): Ch 1, sc in first sc, 2 sc in next ch-4 sp, *sc in next sc, 2 sc in next ch-4 sp; rep from * around, sl st to first sc. (16 sc worked into sc + 32 sc worked into sps = 48 sc; flattened, 24 front, 24 back)

Rnd 21: Ch 1, sc in each sc, sl st to first sc. (48 sc; 24 front, 24 back)

Rnd 22: Ch 1, reverse sc in each sc, sl st to first st. (48 sts; 24 front, 24 back)

Fasten off.

Bottom edging: Turn the body upside down and join cream to any free loop of the foundation chain. Ch 1, reverse sc in each of the 32 loops, sl st to first st. (32 sts; 16 front, 16 back) Fasten off.

Why the math works:

  • Top: 48 sc is 12 in (30.5 cm) around, or 6 in (15.2 cm) flat. That is narrower than the 14 in (35.6 cm) widest round, so the top curves inward.
  • Bottom: the opening keeps its original 32 stitches, which is 8 in (20.3 cm) around or 4 in (10.2 cm) flat. That is snug enough to hold the bags in.
  • Edging rounds: each one matches the stitch count of the round below it, so neither edge ruffles.
  • Height: the top band adds 0.75 in (1.9 cm) and the bottom edging adds 0.25 in (0.6 cm). Together they take the body from 12.5 in (31.8 cm) to 13.5 in (34.3 cm).

Final Blocking

  1. Weave in all ends.
  2. Mist the body until it’s damp.
  3. Slide a rolled towel about 4.5 in (11.4 cm) across inside the body.
  4. Shape the body to 7 in (17.8 cm) x 13.5 in (34.3 cm), with the diamond columns running straight.
  5. Pin the appliqués flat, mist them, and shape the tail curl by hand. Let everything dry completely.
  6. Center the strap on the back of the top band and wrap it around the covered ring. Sew one end inside the band and the other end outside, so the ring sits 1 in (2.5 cm) above the edge.
  7. Sew the squirrel to the center front, with its head 2.5 in (6.4 cm) below the top edge. Stitch through the mesh bars from behind.
  8. Sew the hat on at a tilt, then sew the acorn against the squirrel’s chest.
  9. Below the squirrel on each side, sew 2 leaves in a V shape with 3 berries at the base.

Final Quality-Control Checklist

  • The body measures 7 in (17.8 cm) x 13.5 in (34.3 cm).
  • Every mesh round has 16 loops, and the diamond columns run straight.
  • The bottom opening is 4 in (10.2 cm) across and its edging is even.
  • The top band has 48 sts and lies flat.
  • No part of the ring shows through the cover.
  • The strap is centered and firmly sewn.
  • The appliqués lie flat, and no sewing stitches show on the front.

Troubleshooting

  • Mesh spirals sideways: Always start each round by slip stitching into the first space, and join to the first sc.
  • Body is too narrow: Loosen your chains, or add 1 ch to each loop in Rnds 6–17.
  • Bags fall out of the bottom: Work 1 extra sc round after Rnd 2.
  • Top band flares: Go down one hook size for Rnds 20–22.
  • Tail uncurls: Tack the spiral in 2 or 3 places from the back.
  • Appliqué sags into the mesh: Add tacking stitches at its outer edges.

Care

Hand wash in cool water and lay flat to dry, reshaping the mesh while it’s damp. Don’t tumble dry.

Crocheted cream and sage squirrel hand towels decorated with Santa hats and berries hanging as holiday kitchen decor.

Final Notes

Here is how the measurements build on each other:

  • The 32-sc rim gives a 4 in (10.2 cm) bottom opening.
  • Sixteen loops that grow from ch-3 to ch-6 widen the body to 7 in (17.8 cm).
  • Twelve ch-6 rounds add 9 in (22.9 cm) of height.
  • Shorter loops and the 48-sc band shape the top.
  • The edgings finish the body at 13.5 in (34.3 cm).
  • The strap and ring bring the hanging length to about 18 in (45.7 cm).

Check each measurement as you go, and your squirrel will be ready for the holidays.

Happy crocheting!

Leave a Comment