This little tree is made from one simple idea: a long, narrow ribbon of crochet with a scalloped edge, wound into a spiral cone and topped with a tiny star. Hung from a branch, the tiers catch the light, and the finished piece looks much more delicate than the stitches you use to make it.
The sample uses a single shade of soft cream cotton, so the ornament has a clean, Scandinavian, heirloom look. It suits a white-and-gold tree, a natural wood-and-greenery theme, or a gift tag. A dozen of them make a matching set.
This pattern uses US crochet terms. The finished ornament measures 4 in (10.2 cm) across the base and 6 in (15.2 cm) tall from base to star tip. The hanging loop adds 1.25 in (3.2 cm).
For construction, you work one long strip lengthwise: a foundation chain, one row of double crochet, then one row of shell scallops along one long edge. Next you make a small five-point star with a chain loop. Finally you stiffen the strip around a paper cone so it holds its spiral shape, and sew the star to the top.
Finished Size and Construction
- Finished size: 4 in (10.2 cm) base diameter × 6 in (15.2 cm) tall, plus a 1.25 in (3.2 cm) loop
- Skill level: Easy–Intermediate
- Terminology: US crochet terms
- Yarn weight: Super Fine (#1) cotton, fingering weight, or size 3 crochet thread
- Hook: 2.25 mm (US B-1)
- Number of pieces: 1 ornament, made from 1 scalloped strip and 1 star with a loop
- Layout: strip coiled in about 7 spiral turns, star at the top
- Strip size: 49 in (124.5 cm) long × 3/4 in (1.9 cm) wide
- Strip width before scallop edge: 3/8 in (1.0 cm)
- Scallop edge depth: 3/8 in (1.0 cm)
- Star size: 1 in (2.5 cm) point to point
Materials
Yarn advice: Pick a smooth mercerized cotton or a cotton blend. Cotton holds stiffener well and gives the scallops a crisp outline. Avoid fluffy or very stretchy acrylics, which tend to sag on a spiral.
- Cream/Ivory: 12 g, about 40 m (43.7 yd), for the strip, star, and loop
Tools:
- 2.25 mm (US B-1) crochet hook
- Tapestry needle
- Scissors
- 2 stitch markers
- Fabric stiffener, or strong starch solution
- A cone form 5 in (12.7 cm) tall with a 4 in (10.2 cm) base, rolled from cardstock and taped
- Plastic wrap to cover the cone
- Rustproof pins
- Optional: matching sewing thread and a sharp needle for tacking
The quantity above includes a margin of about 25% for your gauge swatch and weaving in ends.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- st(s) – stitch(es)
- sk – skip
- rep – repeat
- MR – magic ring
Special stitch:
– Shell: 5 dc worked into the same stitch.
Gauge and Checkpoints
Gauge: 28 dc = 4 in (10.2 cm) and 1 dc row = 3/8 in (1.0 cm), using a 2.25 mm hook.
Test first: Before you commit to the full 345-chain foundation, ch 31 and work Row 1 (29 dc). Then work Row 2 across it, which gives 4 scallops plus the end sc. Measure it unblocked and flat.
Checkpoints:
– Swatch: 29 dc = about 4.1 in (10.5 cm). Each 6-stitch scallop repeat = about 0.86 in (2.2 cm).
– Strip after Row 1: 49 in (124.5 cm) long × 3/8 in (1.0 cm) wide.
– Strip after Row 2: 49 in (124.5 cm) long × 3/4 in (1.9 cm) wide.
– Star: 1 in (2.5 cm) point to point.
– Finished cone: 4 in (10.2 cm) base × 6 in (15.2 cm) tall including the star.
If your swatch is too big (fewer than 28 dc per 4 in): go down to a 2.0 mm hook. Otherwise your strip will run longer than 49 in (124.5 cm) and the tree will need more turns or a bigger cone.
If your swatch is too small (more than 28 dc per 4 in): go up to a 2.5 mm hook. A short strip gives fewer tiers and a stubby tree.
The tree is forgiving because the cone sets the shape. Still, matching gauge keeps the tier count at about seven.

Scalloped Strip: Foundation and Body
The strip is worked lengthwise. The stitch count must be a multiple of 6 plus 1 so the scallop row fits exactly.
Foundation: Ch 345. Leave a 6 in (15.2 cm) starting tail; you will use it to sew the star on later.
Place a marker every 50 ch while you chain. This makes counting much easier.
Row 1: Dc in the 4th ch from the hook and in each ch across. Turn.
Total: 343 dc (the skipped ch-3 counts as the first dc, so 342 dc worked + 1 turning chain).
Check: 343 = (57 × 6) + 1, which is exactly the multiple the scallop row needs.
Checkpoint: Lay the strip flat without stretching it. It should measure 49 in (124.5 cm) long and 3/8 in (1.0 cm) wide. If it is more than 1 in (2.5 cm) off, check your count before going on.
Do not fasten off. Row 2, the scallop edge, is worked directly across the top of Row 1 and is described in the Border section below.
Star Topper
The star is worked in the round and is not turned.
Rnd 1: Make an MR, ch 1, work 10 sc in the ring, and sl st to the first sc to join. Pull the ring closed.
Total: 10 sc.
Rnd 2 (points): Ch 3, sc in the 2nd ch from the hook, hdc in the next ch, sk 1 sc of Rnd 1, sl st in the next sc. Rep from * 4 more times. The last sl st lands in the joining st.
Total: 5 points. Each point uses 2 sc of Rnd 1, and 5 × 2 = 10 sc, so all of Rnd 1 is used.
Checkpoint: The star should lie flat and measure 1 in (2.5 cm) from point to point.
Hanging Loop
Work this straight off the star without fasten off.
Sl st up the side of the next point to reach its tip. This point becomes the top of the star.
Loop: Ch 20, then sl st into the same tip to close the ring. Sl st in each of the 20 ch around the loop to firm it up, then sl st into the tip again.
Total: 20 ch + 20 sl st.
Fasten off and leave an 8 in (20.3 cm) tail. You will use this tail to sew the star to the tree.
Checkpoint: The loop rises 1.25 in (3.2 cm) above the star tip.
Border: Scallop Edge (Row 2 of the Strip)
On this ornament, the scallop edge is the border. It runs along one long side of the strip only. The two short ends stay plain.
Border gauge: One repeat (sc + shell) uses 6 stitches of Row 1 and measures about 0.86 in (2.2 cm). It adds 3/8 in (1.0 cm) of depth.
Row 2: Ch 1, sc in the first dc. Sk 2 dc, shell in the next dc, sk 2 dc, sc in the next dc. Rep from * across. The final sc goes in the top of the turning ch-3. Fasten off and leave a 6 in (15.2 cm) tail.
Counts per side:
– Long scalloped side: 57 shells and 58 sc. That is (57 × 5 dc) + 58 sc = 285 + 58 = 343 stitches.
– Long foundation side: 343 chain loops, left unworked as the clean top edge of each tier.
– Each short end: 0 stitches added; the ends stay plain.
Why the math works: The first sc uses 1 stitch. Each repeat then uses 6 stitches of Row 1: 2 skipped, 1 shell, 2 skipped, 1 sc. So 1 + (57 × 6) = 343, which matches Row 1 exactly. The strip ends with a sc at both ends and each shell is centered.
A shell of 5 dc spread over a 5-stitch span (2 + 1 + 2) lies flat instead of ruffling. That keeps the tiers smooth when you coil the strip.
Checkpoint: The strip is now 49 in (124.5 cm) × 3/4 in (1.9 cm).
Final Blocking
The stiffening does the shaping, so take your time with it.
- Prepare the cone. Roll cardstock into a cone 5 in (12.7 cm) tall with a 4 in (10.2 cm) base and tape it. Wrap it in plastic wrap.
- Mark the spiral. With a pen, draw a spiral line on the plastic. Start 3/8 in (1.0 cm) below the tip and make about 7 turns, dropping roughly 5/8 in (1.6 cm) per turn, to end at the base.
- Wet the strip. Soak the strip in stiffener and squeeze out the excess. It should be damp, not dripping. Wet the star separately.
- Wind the strip. Put the starting end (foundation-tail end) at the tip of the cone. Wind the strip down along the line with the plain chain edge on top and the scallops pointing down. Each scallop edge should just overlap the top edge of the tier below.
- Pin it. Pin each turn every 1 in (2.5 cm) through the plain top edge only. Do not pin through the scallops.
- Shape the scallops. Tease each shell into an even, rounded fan with your fingertips.
- Shape the star. Lay the star flat on plastic wrap, pin out the points, and pull the loop into a teardrop shape.
- Dry. Leave everything for 24 hours, until stiff and fully dry, then remove the pins and slide the tree off the cone.
- Attach the star. Thread the star tail onto a tapestry needle. Sew the two lower points of the star to the top turn of the strip, front and back, with 3–4 small stitches. Weave in all tails.
- Optional tacking. For extra strength, tack each tier to the tier above at the back with 2 hidden stitches of sewing thread.
Final Quality-Control Checklist
- Row 1 has 343 dc and Row 2 has 57 shells.
- The strip measures 49 in (124.5 cm) × 3/4 in (1.9 cm) before shaping.
- All shells sit evenly with nothing ruffled or cupped.
- The plain edge is on top on every tier, and the scallops point down.
- There are about 7 turns, with even gaps all the way round.
- The base measures 4 in (10.2 cm) across and the tree is 6 in (15.2 cm) tall.
- The star is centered, flat, and 1 in (2.5 cm) across.
- The loop is 1.25 in (3.2 cm) and the ornament hangs straight.
- No shiny stiffener residue remains, and all tails are woven in.
Troubleshooting
Strip twists like a corkscrew. This is normal for a long, narrow piece. Blocking on the cone removes it. While you crochet, let the strip hang to untwist.
Scallops ruffle. Check that you skip 2 dc on each side of every shell. If they still ruffle, work the shells as 4 dc instead of 5, but keep the 6-stitch repeat.
Tree is too tall and gappy. Your strip is long, or the turns are spaced too widely. Re-wet the strip and wind it with closer turns, about 1/2 in (1.3 cm) apart.
Tree is short with few tiers. Your gauge is tight. Re-block on a smaller cone, or remake the strip with a larger hook.
Tree leans when hung. The star is off-center. Re-sew it directly above the cone’s axis.
Star cups. Your Rnd 1 is too tight. Work 10 sc more loosely, or block the star flat with extra pins.
Loop stretches. You skipped the sl st round. Add it, or re-stiffen the loop.
Care
Dust gently with a soft brush and store the ornament flat in a box so the spiral is not crushed. If it softens, re-wet it with stiffener, reshape it on the cone, and let it dry.

Final Notes
Everything follows from one measurement chain. A gauge of 28 dc = 4 in (10.2 cm) gives a 343-stitch Row 1 that is 49 in (124.5 cm) long. The 343 stitches divide into exactly 57 scallop repeats, which makes a 3/4 in (1.9 cm) strip. Wound around a 5 in (12.7 cm) cone in about 7 turns, that strip becomes a 4 in (10.2 cm) wide tree. A 1 in (2.5 cm) star on top brings it to 6 in (15.2 cm). If you keep your gauge and your counts, the tree takes care of itself.
Happy crocheting!