This holder is a cozy holiday bathroom piece: three round pockets in a row, each with a cheerful reindeer face, hanging from a burgundy bar on two wooden rings. Each pocket holds one standard roll, so spares stay in sight and within reach.
The pocket bodies use oatmeal yarn in herringbone half double crochet. Burgundy bases, bottom bands and rims frame each pocket. The faces have chocolate brown antlers, a small red ball nose and black safety eyes. The look is rustic Scandinavian with a little Christmas whimsy.
This pattern uses US crochet terms. The finished holder is about 15.1 in (38.4 cm) wide and 7.1 in (18.0 cm) tall, not counting the rings. Each pocket is 4.75 in (12.1 cm) across and 4.1 in (10.4 cm) tall.
To build it, you crochet three pockets from the base up in joined rounds and add the faces. Then you whipstitch the pockets together. Next, you work a one-row hanger bar and give it a two-round border. Last, you sew on four straps and two ring tabs.
Finished Size and Construction
- Finished size: 15.1 in (38.4 cm) wide × 7.1 in (18.0 cm) tall, excluding rings
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4)
- Hook: 5.0 mm (H-8)
- Number of pieces: 3 pockets, 1 hanger bar, 4 straps, 2 ring tabs, 6 antlers, 3 noses
- Layout: 3 pockets in 1 row, with the bar above them
- Piece size (pocket): 4.75 in (12.1 cm) diameter × 4.1 in (10.4 cm) tall
- Bar size before border: 14.25 in × 0.22 in (36.2 cm × 0.6 cm)
- Border depth: 2 rounds, about 0.44 in (1.1 cm) on each edge
Materials
Use a smooth worsted yarn with good stitch definition. Cotton or a cotton blend holds the pocket shape best. Acrylic also works and is softer. Avoid fuzzy yarns, because they hide the herringbone texture.
- Burgundy (A): 60 g / 110 m
- Oatmeal (B): 50 g / 90 m
- Chocolate brown (C): 10 g / 18 m
- Red (D): 5 g / 9 m
Tools and notions:
– 5.0 mm (H-8) crochet hook
– 6 black safety eyes, 6 mm
– 2 wooden rings, 2 in (5.1 cm) diameter
– A small amount of fiberfill or yarn scraps
– Stitch markers
– Tapestry needle
– Scissors
– Tape measure
The quantities include a margin of about 30% for swatching and seams.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- sc2tog – single crochet 2 together
- inc – 2 sc in the same stitch
- BLO – back loop only
- MR – magic ring
- st(s) – stitch(es)
- sp – space
Special stitch: Herringbone half double crochet (HBhdc). Yarn over and insert the hook in the stitch. Yarn over and pull the loop through the stitch and through the first loop on the hook (2 loops left on the hook). Yarn over and pull through both loops.
Turn after every HBhdc round. This reverses the slant of the stitches each round and stacks them into the V-shaped herringbone columns.
Gauge and Checkpoints
- Single crochet: 16 sts × 18 rows = 4 in (10.2 cm)
- HBhdc: 16 sts × 12 rounds = 4 in (10.2 cm)
Make one complete pocket before anything else. It is your gauge swatch.
- After Round 10: the base measures 4.75 in (12.1 cm) across and lies flat.
- After Round 21: the wall is 3.4 in (8.6 cm) tall, measured from the base ridge.
- After Round 24: the pocket is 4.1 in (10.4 cm) tall, and a roll drops in easily.
If the base is too big, go down a hook size. If it is too small, or a roll won’t fit, go up a size. If only the HBhdc section is off, change hook size for those rounds only. The bar length depends on your sc gauge, so check that the pockets are right first.

Pocket (Make 3)
Start every round in the same place and mark it. This spot becomes the center back of the pocket. With the start of the round as stitch 1, stitches 16 and 46 are the sides, and stitch 31 is the center front.
Base (Color A):
Join each round with a sl st to the first sc, then ch 1. The ch 1 does not count as a stitch.
- R1: 6 sc in MR. (6)
- R2: inc in each st around. (12)
- R3: sc 1, inc around. (18)
- R4: sc 2, inc around. (24)
- R5: sc 3, inc around. (30)
- R6: sc 4, inc around. (36)
- R7: sc 5, inc around. (42)
- R8: sc 6, inc around. (48)
- R9: sc 7, inc around. (54)
- R10: sc 8, inc around. (60)
Checkpoint: the base measures 4.75 in (12.1 cm) across. 60 sts ÷ 4 sts per inch = 15 in (38.1 cm) around.
Bottom band (Color A):
- R11: sc in the BLO of each st around. This makes the ridge where the base turns up into the wall. (60)
- R12: sc around. (60) On the final sl st of this round, change to Color B. Fasten off A.
Herringbone body (Color B):
- R13: ch 2 (does not count as a stitch). HBhdc in each st around. Join with a sl st to the first HBhdc and turn. (60)
- R14–R21: repeat R13, turning every round. (60 each round, 9 HBhdc rounds total) On the final sl st of R21, change to Color A.
Checkpoint: the wall is 3.4 in (8.6 cm) tall. That is 0.44 in (1.1 cm) of band plus 3.0 in (7.6 cm) of herringbone.
Rim (Color A):
- R22–R24: ch 1, sc around, sl st to join. (60 each round)
Fasten off. The rim is 0.67 in (1.7 cm) deep, and the total height is 4.1 in (10.4 cm).
Antlers (Make 6, Color C)
- Ch 8.
- Top tip: sc in the 2nd ch from the hook and in the next ch. (2 main sts)
- First branch: ch 3, sc in the 2nd ch from the hook and in the next ch. (2 branch sts)
- Middle: sc in the next 2 ch of the main chain. (4 main sts so far)
- Second branch: ch 3, sc in the 2nd ch from the hook and in the next ch. (2 branch sts)
- Base: sc in the last 3 ch of the main chain. (7 main sts)
The antler has 7 main sts plus 4 branch sts, for 11 sc total. It is about 1.75 in (4.4 cm) long. Fasten off and leave a 10 in (25.4 cm) tail.
Nose (Make 3, Color D)
- R1: 6 sc in MR. (6)
- R2: inc in each st around. (12)
- R3: sc around. (12)
- R4: sc2tog around. (6)
Stuff the nose firmly with fiberfill or scraps. Close the opening and leave a tail. The nose is about 0.75 in (1.9 cm) across.
Face Assembly (Each Pocket)
Do this before joining the pockets, while each pocket can lie flat.
- Nose: center the nose over st 31 on R14–R15. Sew it on with the tail.
- Eyes: insert the safety eyes on R17 at sts 29 and 33. They will be 1 in (2.5 cm) apart. Press the washers on from inside the pocket.
- Antlers: place an antler base just above each eye, starting on R18. Angle the tips up and outward, ending at R21. Whipstitch along the main stem and tack down each branch tip.
Keep all three faces at the same height and angle. Matching faces make the row look polished.
Hanger Bar, Straps and Ring Tabs
Bar (Color A): Ch 58. Sc in the 2nd ch from the hook and in each remaining ch. (57) Do not fasten off; the border comes next.
Each pocket gets 19 sts of bar length: sts 1–19, 20–38 and 39–57. 19 sts at 4 sts per inch = 4.75 in (12.1 cm), which is exactly one pocket width.
Straps (Make 4, Color A): Ch 5. Sc in the 2nd ch from the hook and in each remaining ch. (4) Work 13 more rows of 4 sc, chaining 1 and turning at the start of each row. That makes 14 rows. Each strap is 1 in (2.5 cm) wide and 3.1 in (7.9 cm) long.
Ring tabs (Make 2, Color A): Ch 6. Sc in the 2nd ch from the hook and in each remaining ch. (5) Work 7 more rows of 5 sc, for 8 rows total. Each tab is 1.25 in (3.2 cm) wide and 1.8 in (4.6 cm) long.
Make All Pieces
| Color | Pieces |
|---|---|
| A (burgundy) | 3 pocket bases, bands and rims; 1 bar; 4 straps; 2 ring tabs |
| B (oatmeal) | 3 pocket bodies |
| C (brown) | 6 antlers |
| D (red) | 3 noses |
Layout (front view):
(Ring)========== HANGER BAR ==========(Ring)
|S1| |S2| |S3| |S4|
[ Pocket 1 ][ Pocket 2 ][ Pocket 3 ]
S1 and S4 line up with the outer edges of the pocket row. S2 and S3 sit over the two pocket seams.
Joining
Method: whipstitch with Color A for the burgundy rounds and Color B for the herringbone rounds.
Stitch-to-stitch logic: stand Pockets 1 and 2 upright. Turn them so that st 46 of Pocket 1 touches st 16 of Pocket 2. Work from R11 up to R24, making 1 whipstitch per round through both pockets. The wall has 2 band rounds, 9 body rounds and 3 rim rounds, so each seam has exactly 14 whipstitches. Join Pocket 3 to Pocket 2 the same way, with st 46 of Pocket 2 against st 16 of Pocket 3. Then add 2 tacking stitches through the R11 ridges at the base so the bottoms sit level.
Tension: pull each stitch snug but not tight. The pockets should touch without being squeezed flat. If the seam puckers, take it out and redo it more loosely.
Size checkpoint: the joined row measures 14.25 in (36.2 cm) wide, which is 3 × 4.75 in (12.1 cm). The tops of the rims should line up in one straight line.
Border (Hanger Bar)
Border gauge: sc, 16 sts × 18 rows = 4 in (10.2 cm). Each border round adds 0.22 in (0.6 cm) to every edge.
- Round 1: ch 1 and keep working from the end of the bar. Work along the top: 1 sc in each st (57). Ch 1 at the corner. Work along the short side: 1 sc in the row-end (1). Ch 1 at the corner. Work along the bottom: 1 sc in each free loop of the foundation chain (57). Ch 1 at the corner. Work along the other short side: 1 sc in the row-end (1). Ch 1, then sl st to the first sc. Total: 57 + 1 + 57 + 1 = 116 sc, plus 4 corner ch-1 sps.
- Round 2: ch 1. Sc in each sc around. In each corner ch-1 sp, work (sc, ch 1, sc). Each long side now has 57 + 2 = 59 sc, and each short side has 1 + 2 = 3 sc. Sl st to join. Total: 59 + 3 + 59 + 3 = 124 sc, plus 4 corner ch-1 sps. Fasten off.
Why the math works: the 57 sts of the bar body match the three pockets (3 × 19 sts = 14.25 in / 36.2 cm). The two border rounds add 0.44 in (1.1 cm) at each end. That makes the bar 15.1 in (38.4 cm) long, so it extends 0.44 in (1.1 cm) past each side of the pocket row and gives the ring tabs room. The bar height is 1 row plus 2 border rounds on each edge, or 5 × 0.22 in = 1.1 in (2.8 cm).
Assembling the hanger:
- Lay the bar face down. Pin the straps to the back so that each strap overlaps the bar by 0.5 in (1.3 cm).
- S1 and S4 sit 0.44 in (1.1 cm) in from the bar ends.
- S2 and S3 are centered over the boundaries between sts 19/20 and 38/39. Count these stitches on the bar body, inside the border.
- Sew each strap down on all sides.
- Pin the lower ends of the straps behind the pocket rims so they overlap the 3 rim rounds, 0.67 in (1.7 cm). S2 and S3 cover the seams. Sew them down.
- Each window opening should be 1.9 in (4.8 cm) tall: 3.1 in strap − 0.5 in − 0.67 in.
- Fold each ring tab around a ring and sew both ends of the tab to the back of a bar end.
The total height is 4.1 in pocket + 1.9 in window + 1.1 in bar = 7.1 in (18.0 cm).
Final Blocking
- Put a roll in each pocket so the pockets keep their round shape.
- Mist the holder lightly with water. If the yarn is acrylic, steam it from 1 in (2.5 cm) away instead, and don’t touch the iron to the yarn.
- Lay the holder flat on a towel, face up.
- Straighten the bar with pins at 15.1 in (38.4 cm) long.
- Square the windows to 1.9 in (4.8 cm) tall.
- Line up the three rims in a straight line.
- Let it dry completely, with the rolls still inside.
Final Quality-Control Checklist
- [ ] Each pocket is 60 sts around and 4.1 in (10.4 cm) tall
- [ ] The herringbone V columns look even, with every HBhdc round turned
- [ ] All faces sit at the same height, with the nose over st 31
- [ ] Each pocket seam has 14 whipstitches
- [ ] Bar border Round 2 has 124 sc: 59 per long side and 3 per short side
- [ ] Straps are evenly spaced, and S2 and S3 cover the seams
- [ ] The rings are secure and the holder hangs level
Troubleshooting
- The base ruffles: your sc tension is loose. Go down a hook size for the base only.
- The base cups: you skipped an increase. Count each round again.
- The texture slants instead of forming Vs: you didn’t turn after a round. Turn after every HBhdc round.
- The seam line drifts: the round start moved. Keep the marker at center back.
- The holder tilts: a strap is uneven. Re-sew it so the overlap is exactly 0.67 in (1.7 cm).
- The nose looks flat: stuff it more firmly before you close it.
Care
Spot clean or hand wash cold, then reshape and dry flat with rolls in the pockets. Don’t put it in the dryer, because heat can loosen the safety eye washers.

Final Notes
Here is the measurement chain:
- Pocket base: 60 sts at 4 sts per inch = 15 in (38.1 cm) around, or 4.75 in (12.1 cm) across.
- Pocket height: 2 band rounds, 9 herringbone rounds and 3 rim rounds = 4.1 in (10.4 cm).
- Pocket row: three pockets = 14.25 in (36.2 cm), matched by the 57-st bar.
- Bar: a 2-round border brings it to 15.1 in × 1.1 in (38.4 cm × 2.8 cm).
- Straps: 3.1 in (7.9 cm) straps leave 1.9 in (4.8 cm) windows.
- Finished height: 7.1 in (18.0 cm).
If you check the first pocket against these numbers, everything after it should fall into place.
Happy crocheting!