The Snowberry Cottage is a lacy little house ornament with a cream filet-style wall and two four-pane arched windows. A solid green door sits in the middle, and a bright red roof is trimmed with five cream shells that look like drifts of snow along the eaves.
The palette is classic Christmas: cream, cranberry red, and pine green. The style is light and airy. With the tree lights behind it, the window panes glow.
This pattern uses US crochet terms. The finished ornament measures about 4.75 in (12.1 cm) wide by 4.75 in (12.1 cm) tall, plus a 1.5 in (3.8 cm) hanging loop, for a total hanging height of about 6 in (15.2 cm).
You work the wall flat in rows from the bottom up and then add a single-crochet edging. Next, you chain the red roof across the top and work it into a mesh band. The cream shells go along the underside of the roof chain, and the loop goes at the peak. Finally, you make a small green door and sew it over the doorway.
Finished Size and Construction
- Finished size: 4.75 in (12.1 cm) wide x 4.75 in (12.1 cm) tall, excluding the loop
- Skill level: Easy-Intermediate
- Terminology: US
- Yarn weight: Sport / light fingering cotton (weight 2)
- Hook: 2.5 mm
- Number of pieces: 1 ornament, plus 1 small door appliqué sewn on
- Layout: Single motif, no assembly grid
- Wall size before border: 4.2 in (10.7 cm) wide x 2.3 in (5.8 cm) tall
- Wall size after border: 4.4 in (11.2 cm) wide x 2.5 in (6.4 cm) tall
- Border depth: 1 round of sc, about 0.125 in (0.3 cm)
Materials
Use a smooth, mercerized cotton. It gives crisp stitch definition, holds the window shapes after blocking, and doesn’t fuzz. Avoid fuzzy acrylics, because they blur the open mesh.
- Cream: 10 g (about 31 m)
- Red: 4 g (about 12 m)
- Green: 2 g (about 6 m)
These quantities include a margin for swatching and weaving in ends. If you plan several ornaments for the tree, multiply them by the number you want to make.
Tools:
– 2.5 mm crochet hook
– Tapestry needle
– Scissors
– Blocking mat and rust-proof pins
– Spray bottle; spray starch is optional
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS – right side
Special stitches (mesh units):
– Block (B): dc in each of the next 3 sts. When you work a Block over a ch-2 sp, work 2 dc in the sp and then 1 dc in the next dc.
– Space (S): ch 2, sk next 2 sts (or the ch-2 sp), dc in next dc.
– Shell: 5 dc in the same st.
Each Block or Space is 3 sts wide. Every mesh row begins with ch 3, which counts as the first dc. Then come 8 mesh units, for 1 + (8 x 3) = 25 sts per row.
Gauge and Checkpoints
Gauge: 24 dc and 12 dc rows = 4 in (10.2 cm). That means 6 sts = 1 in (2.5 cm), and one mesh unit = 0.5 in (1.3 cm).
Treat the wall itself as your swatch. Its first checkpoints come early, so you can confirm your gauge before you invest in the roof.
- After Row 2: the strip measures 4.2 in (10.7 cm) wide.
- After Row 8: the wall measures 4.2 in (10.7 cm) x 2.3 in (5.8 cm).
- After the wall border: 4.4 in (11.2 cm) x 2.5 in (6.4 cm).
- After Roof Row 2: each slope measures about 2.7 in (6.9 cm). When pinned, the gable is about 1.7 in (4.3 cm) tall from the top of the wall to the peak.
If your wall is too wide, go down to a 2.25 mm hook. If it’s too narrow, go up to a 2.75 mm hook. A difference of 0.25 in (0.6 cm) or more is enough reason to restart. Small ornaments show size changes quickly, especially in how the door fits.

Wall (Cream)
Ch 26.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across. Turn. (25 sc)
Row 2: Ch 1, sc in each st across. Turn. (25 sc)
Checkpoint: 4.2 in (10.7 cm) wide.
Row 3 (base openings): Ch 3 (counts as dc), S 8 times. Turn. (25 sts: 9 dc + 8 ch-2 sps)
This makes the row of open boxes along the bottom of the house.
Row 4 (window sills): Ch 3, B 3 times, S 2 times, B 3 times. Turn. (25 sts)
Meshes 1–3 and 6–8 are solid. Meshes 4–5 stay open as the doorway.
Row 5 (lower panes): Ch 3, B, S 6 times, B. Turn. (25 sts)
Meshes 2–3 form the lower panes of the first window, meshes 4–5 continue the doorway, and meshes 6–7 form the lower panes of the second window.
Row 6 (upper panes): Ch 3, B, S 2 times, B 2 times, S 2 times, B. Turn. (25 sts)
The doorway closes here, so the green door will cover Rows 3–5 in meshes 4–5.
Row 7 (arched window tops): Ch 3, B. Over the first window, work: ch 1, sk next st, hdc in next st, sc in center dc, hdc in next st, ch 1, sk next st, dc in next dc. Then work B 2 times. Over the second window, repeat the same arch sequence. Finish with B. Turn. (25 sts)
Count check: 1 + 3 + 6 + 6 + 6 + 3 = 25. The arch sequence takes up 6 st positions. The hdc–sc–hdc in the middle shrinks each upper pane into a rounded opening, which gives the windows their arched tops. The center dc of each window carries straight up as the vertical crossbar.
Row 8 (eave line): Ch 3, dc in each st and in each ch-1 sp across. (25 dc) Do not turn. Do not fasten off.
Checkpoint: 4.2 in (10.7 cm) x 2.3 in (5.8 cm). Rows 1–2 measure about 0.33 in (0.8 cm), and Rows 3–8 measure 2 in (5.1 cm).
Wall Border (Cream)
Border gauge: 1 sc per sc row end, 2 sc per dc row end, and 1 sc per foundation chain loop.
Continue from the end of Row 8 and work down the left side:
- Left side: 2 sc in the end of each dc row (Rows 8–3), then 1 sc in the end of each sc row (Rows 2–1). (14 sc)
- Bottom-left corner: 3 sc in the first foundation loop.
- Bottom: sc in each of the next 23 foundation loops. (23 sc)
- Bottom-right corner: 3 sc in the last foundation loop.
- Right side: 1 sc in each sc row end and 2 sc in each dc row end. (14 sc)
Sl st to the top of the last dc of Row 8. Fasten off. (57 sts: 14 + 3 + 23 + 3 + 14)
Why the math works: The bottom has 25 foundation loops. The 2 corner loops each get 3 sc, and the 23 loops between them get 1 sc each, so no loop is counted twice. Each side has 6 dc rows x 2 sc plus 2 sc rows x 1 sc, which is 14 sc. That matches the 2.3 in (5.8 cm) height at about 6 sc per inch, so the edges lie flat without ruffling or cupping. The top edge is left unbordered because the roof will cover it.
Checkpoint: 4.4 in (11.2 cm) x 2.5 in (6.4 cm).
Roof (Red)
Roof Row 1 (foundation): With RS facing, join red with a sl st to the top-left corner dc of Row 8. Ch 33. Sl st to the top-right corner dc of Row 8.
The chain forms the open gable. Number the chains 1–33, starting from the right corner. Ch 17 is the peak.
Roof Row 2 (mesh band): Sl st into ch 1. Ch 4 (counts as dc + ch 1), sk ch 2, dc in ch 3. Then repeat [ch 1, sk 1 ch, dc in next ch] 6 times, ending with a dc in ch 15. Ch 1, sk ch 16, and work (dc, ch 3, dc) in ch 17 for the peak. Ch 1, sk ch 18, dc in ch 19. Then repeat [ch 1, sk 1 ch, dc in next ch] 7 times, ending with a dc in ch 33. Sl st to the top-left wall corner. Turn.
(18 dc, 16 ch-1 sps, 1 ch-3 peak sp)
Each slope has 8 dc posts and 8 ch-1 sps. The peak adds 2 dc around the ch-3 sp.
Roof Row 3 (edge): Ch 1, sc in each dc and each ch-1 sp down to the peak. Work 3 sc in the ch-3 sp, then sc in each dc and each ch-1 sp to the end. Fasten off.
(37 sc: 17 per slope + 3 at the peak)
Each slope count is 8 dc + 8 sps + 1 peak dc = 17.
Checkpoint: pin the peak straight up. Each slope measures about 2.7 in (6.9 cm), and the gable is about 1.7 in (4.3 cm) tall above the wall. The red band is about 0.5 in (1.3 cm) deep.
Snow Shells (Cream)
Turn the piece so the underside of the roof chain faces you. Work into the remaining free loop of each chain from Roof Row 1, starting at ch 1 on the right.
Shell row: Join cream at ch 1. Shell in ch 1, then sc in each of ch 2–8 (7 sc). Shell in ch 9, sc in each of ch 10–16 (7 sc). Shell in ch 17, sc in each of ch 18–24 (7 sc). Shell in ch 25, sc in each of ch 26–32 (7 sc). Shell in ch 33. Fasten off.
(53 sts: 5 shells x 5 dc = 25, plus 4 x 7 sc = 28)
The corner shells at ch 1 and ch 33 hang over the wall corners. The ch 9 and ch 25 shells sit halfway down each slope, and the ch 17 shell sits right under the peak.
Hanging Loop (Cream)
Join cream to the center sc of the 3 peak sc from Roof Row 3. Ch 20, then sl st into the same sc. Work 28 sc into the loop, then sl st to the first sc. Fasten off.
The finished loop stands about 1.5 in (3.8 cm) tall.
Door (Green)
Ch 8.
Row 1: Dc in 4th ch from hook and in each ch across. Turn. (6 sts; the turning ch counts as the first dc)
Row 2: Ch 3, dc in each of the next 5 sts. Turn. (6 sts)
Row 3 (arch): Ch 1, sc in first st, hdc in next st, 2 dc in each of next 2 sts, hdc in next st, sc in last st. Fasten off, leaving a 10 in (25.4 cm) tail. (8 sts: 6 worked one per stitch + 2 extra)
The door measures about 1 in (2.5 cm) square, which matches the doorway in meshes 4–5 across Rows 3–5. Stacked dc posts give the door its vertical ridged texture.
Attach: Center the door on the RS over the doorway, with the arch at the top and the bottom edge resting on Row 2. Whipstitch around the sides and arch through the dc posts behind it. The dc that sits between meshes 4 and 5 stays hidden behind the door.
Final Blocking
- Weave in all ends along same-color stitches. Hide red ends inside the roof band, and hide cream ends in the wall posts.
- Spritz the ornament until it is evenly damp, not dripping.
- Lay it RS up on the mat. Pin the wall into a 4.4 in (11.2 cm) x 2.5 in (6.4 cm) rectangle.
- Pin the roof peak straight up so the gable is 1.7 in (4.3 cm) tall and both slopes are equal.
- Pin each window pane open. A pin in each opening squares the panes and rounds the arches.
- Fan out each shell and pin its center dc.
- Pin the door flat and straighten the hanging loop.
- If you want a stiffer ornament, mist it lightly with starch. Let it dry completely before unpinning.
Final Quality-Control Checklist
- Every wall row has 25 sts, and the border has 57 sts.
- Both windows show 4 panes with rounded tops.
- The door covers the doorway completely with no gaps at the sides.
- Roof Row 2 has 18 dc, and Roof Row 3 has 37 sc.
- There are 5 shells, spaced evenly with 7 sc between each pair.
- The finished size is 4.75 in (12.1 cm) x 4.75 in (12.1 cm), excluding the loop.
- The loop is centered at the peak and the ornament hangs level.
- No ends are visible from the front.
Troubleshooting
The wall is slanting. You may be missing the turning ch-3 or the last dc of a row. Count to 25 at the end of every row.
The window panes look like slots instead of squares. Your ch-2 sps are too tight. Loosen the chains slightly or block more firmly.
The roof sags or pulls the corners inward. Your chain is too tight. Rework Roof Row 1 with a looser chain or one hook size larger.
The shells curl up. Steam them lightly and pin each fan open. Make sure you worked into the free chain loops rather than through both.
The door is too big. Rework the door with a hook 0.25 mm smaller. If it’s too small, work a final round of sc around the sides and arch.
The ornament tilts when hung. Move the loop so it sits exactly on the center peak sc.
Care
Hand wash in cool water with a mild soap, then press out the water in a towel. Reshape and pin flat to dry. Store flat between layers of tissue so the shells and loop keep their shape.

Final Notes
The size of this ornament follows a simple chain of measurements:
- Gauge of 6 sts per in.
- 25-st wall rows, 4.2 in (10.7 cm) wide.
- Eight wall rows, 2.3 in (5.8 cm) tall.
- A 57-st sc border, bringing the wall to 4.4 in (11.2 cm) x 2.5 in (6.4 cm).
- A 33-ch roof spanning that width, with a 1.7 in (4.3 cm) gable.
- Five shells spaced every 8 chains.
- A 1 in (2.5 cm) door for a 1 in (2.5 cm) opening.
If you check each step, the cottage blocks out square and true. Once you’ve made one, a whole row of them on the tree makes a sweet little winter village.
Happy crocheting!