Winter Poinsettia Coaster Set and Holder Crochet Pattern

This set has four flower-shaped coasters and a round holder to keep them in. Each coaster is a terracotta disc with eight rounded scallops. On top of each disc are eight pointed cream petals, eight small olive-green leaves and a cluster of seven terracotta berries.

The holder is a low terracotta basket with a U-shaped opening on the front and back. A cream binding strip runs along the whole rim, and each side wall has a holly motif made of two leaves and three berries. The colors are terracotta, cream and olive green, giving the set a warm, rustic holiday look.

The pattern uses US crochet terms. Each coaster finishes at 5.5 in (14.0 cm) from scallop tip to scallop tip. The holder base measures 6.4 in (16.3 cm) across and the walls stand 2.4 in (6.1 cm) tall.

You crochet each coaster base in the round, then make the petals, leaves and berries separately and sew them on. The holder is worked in spiral rounds from the base up. The two side sections are finished in rows, which leaves the openings, and then a binding strip is sewn over the cut edge.

Finished Size and Construction

  • Coaster size: 5.5 in (14.0 cm) across
  • Holder size: 6.4 in (16.3 cm) base diameter, 2.4 in (6.1 cm) wall height
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.0 mm (US G-6)
  • Number of pieces: 4 coasters and 1 holder, each finished separately and never joined to each other
  • Layout: each coaster has 8 petals in a star, 8 leaves between them and 7 berries in the center
  • Coaster size before border: 5.25 in (13.3 cm)
  • Coaster border depth: 1 round of sc, 0.125 in (0.3 cm) per side
  • Holder binding: 2 rows of sc folded over the rim, 0.2 in (0.5 cm) on each face

Materials

Use a worsted-weight cotton. It absorbs drips, can take a warm mug and keeps the petals crisp.

  • Terracotta: 115 g / 200 m (coaster bases, all berries, holder)
  • Cream: 50 g / 85 m (petals, binding)
  • Olive green: 20 g / 35 m (all leaves)

Tools:

  • 4.0 mm (US G-6) hook
  • Tapestry needle
  • Stitch markers
  • Pins
  • Scissors
  • Blocking mat and spray bottle

All quantities include a margin of about 15%, which covers your test piece and long sewing tails.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • BLO – back loop only
  • MR – magic ring
  • st(s) – stitch(es)
  • rnd – round

Special stitch – Popcorn Berry: Make a MR. Ch 2 (does not count as a st), then work 5 dc into the ring. Remove the hook from the loop, insert it from front to back into the top of the ch-2, pick up the dropped loop and pull it through. Ch 1 to lock. Pull the ring tight and fasten off, leaving a 6 in (15.2 cm) tail. The berry is a round bobble about 0.4 in (1.0 cm) across.

Gauge and Checkpoints

Gauge: 18 sc and 20 rows = 4 in (10.2 cm).

Make one complete coaster base (Rnds 1–6) first and use it as your gauge test. Measure the diameter after each round:

  • After Rnd 1: 1.5 in (3.8 cm)
  • After Rnd 2: 2.75 in (7.0 cm)
  • After Rnd 3: 4 in (10.2 cm)
  • After Rnd 4: 4.5 in (11.4 cm)
  • After Rnd 5: 5.25 in (13.3 cm)
  • After Rnd 6: 5.5 in (14.0 cm)

If your coaster is more than 0.25 in (0.6 cm) too large, use a hook one size smaller. If it is that much too small, go up one size.

The holder is sized around the coaster, with a base 0.9 in (2.3 cm) wider. Use the same hook for every piece in the set.

Three cream crocheted flower patterns shown individually and applied to terracotta coasters with green accents.

Coaster Base (make 4, terracotta)

Rnd 1: MR, ch 3 (counts as dc), 15 dc in ring, sl st to top of ch-3. (16 dc)

Rnd 2: Ch 3, dc in same st, 2 dc in each st around, sl st to top of ch-3. (32 dc)

Rnd 3: Ch 3, 2 dc in next st, *dc in next st, 2 dc in next st; repeat from * around, sl st to top of ch-3. (48 dc)

Rnd 4: Ch 1, *sc in next 2 sts, 2 sc in next st; repeat from * 16 times total, sl st to first sc. (64 sc)

Rnd 5 (scallops, conversion round): Ch 1. *Sc in next st, hdc in next st, 2 dc in next st, 3 dc in next st, 3 dc in next st, 2 dc in next st, hdc in next st, sc in next st; repeat from * 8 times total, sl st to first sc.

Each scallop uses 8 sts of Rnd 4 and produces 14 sts. Count: 64 sts worked 1 per existing st + 48 extra sts (6 per scallop × 8) = 112 sts. The base now measures 5.25 in (13.3 cm).

Rnd 6 is given in the Border section.

Petals (make 32, cream – 8 per coaster)

Ch 10.

Rnd 1: Sc in 2nd ch from hook, hdc in next ch, dc in next 4 ch, hdc in next ch, sc in next ch (8 sts). Work 3 sc in last ch; this is the base of the petal. Rotate the piece and work along the other side of the foundation chain: sc in next ch, hdc in next ch, dc in next 4 ch, hdc in next ch, sc in next ch (8 sts). Ch 2, sl st to first sc to make the pointed tip. (19 sts plus ch-2 tip)

The foundation chain forms the raised center vein. Each petal is 2 in (5.1 cm) long and 0.9 in (2.3 cm) wide. Fasten off, leaving a 10 in (25.4 cm) tail.

Coaster Leaves (make 32, olive green – 8 per coaster)

Ch 5.

Rnd 1: Sc in 2nd ch from hook, hdc in next 2 ch (3 sts), 3 sc in last ch. Working along the other side: hdc in next 2 ch, sc in next ch (3 sts). Ch 1, sl st to first sc. (9 sts plus ch-1 tip)

Each leaf is 1 in (2.5 cm) long. Fasten off, leaving an 8 in (20.3 cm) tail.

Berries (make 34, terracotta)

Make 28 Popcorn Berries for the coasters (7 each) and 6 for the holder (3 per holly motif).

Holder (terracotta)

Base

Rnd 1: MR, 6 sc in ring. (6 sc)

Rnd 2: 2 sc in each st around. (12 sc)

Rnd 3: *Sc in next st, 2 sc in next st; repeat from * around. (18 sc)

Rnds 4–16: Increase 6 sts evenly in every round, working 1 more sc between increases each time. Each round’s total is 6 × the round number: Rnd 4 has 24 sc, Rnd 10 has 60 sc and Rnd 16 has 96 sc.

Work in a spiral and move your marker up each round. Checkpoint: the base measures 6.4 in (16.3 cm) across.

Walls

Rnd 17: Sc in BLO of each st around. (96 sc) This makes a turning ridge at the edge of the base.

Rnds 18–20: Sc in each st around. (96 sc) The low wall is now 0.8 in (2.0 cm) tall.

Sl st in next st and fasten off. Use markers to divide Rnd 20 into four sections, in this order: Side A (26 sts), Opening 1 (22 sts), Side B (26 sts), Opening 2 (22 sts). Check: 26 + 22 + 26 + 22 = 96.

Side A, Rows 1–8: Join yarn in the first st of Side A. Ch 1, sc in each of the 26 sts, turn. Repeat 7 more times. (26 sc per row) Fasten off.

Side B, Rows 1–8: Work the same as Side A.

Each side section is 5.8 in (14.7 cm) wide along the curve and rises 1.6 in (4.1 cm) above the floor of the openings. The total wall height is 2.4 in (6.1 cm). Each opening is 4.9 in (12.4 cm) wide along the curve.

Holly Leaves (make 4, olive green)

Ch 8.

Rnd 1: Sc in 2nd ch from hook, hdc in next ch, dc in next 3 ch, hdc in next ch (6 sts), 3 sc in last ch. Working along the other side: hdc in next ch, dc in next 3 ch, hdc in next ch, sc in next ch (6 sts). Ch 2, sl st to first sc. (15 sts plus ch-2 tip)

Each holly leaf is 1.5 in (3.8 cm) long.

Make All Pieces

Totals per color:

  • Terracotta: 4 coaster bases, 34 berries, 1 holder
  • Cream: 32 petals, 1 binding strip
  • Olive green: 32 coaster leaves, 4 holly leaves

Coaster layout from above (P = petal, L = leaf, B = berry cluster):

        L   P   L
      P           P
    L       B       L
      P           P
        L   P   L

Place one petal on each scallop, pointing toward the scallop’s center, at 12, 1:30, 3, 4:30, 6, 7:30, 9 and 10:30. Place one leaf in each gap between petals, pointing toward the dip between two scallops.

Holder layout from above:

          Opening 1 (front)
   Side A                 Side B
  [holly]                [holly]
          Opening 2 (back)

Joining

All appliqués are sewn on with their own tails. None of the pieces are crocheted together.

Coasters:

  1. Pin all 8 petals with their 3-sc bases 0.4 in (1.0 cm) from the center. The tips should end 0.35 in (0.9 cm) inside the edge.
  2. Whipstitch around the 19 edge sts of each petal, taking 1 coaster st for each petal st. Leave the ch-2 tip unsewn so it stays sharp.
  3. Tuck one leaf between each pair of petals, with its base slightly under the petal edges, and sew around its 9 sts.
  4. Sew 1 berry in the center and the other 6 in a ring around it, covering the petal bases. The cluster measures 1 in (2.5 cm) across.

Tension: Pull each stitch just snug. If the coaster domes or puckers, the sewing is too tight. Loosen those stitches and resew them.

Checkpoint: Each finished coaster should still lie flat and measure 5.5 in (14.0 cm).

Holder: Center one holly motif on the outside of each side section, 0.6 in (1.5 cm) below the rim. Sew the 2 leaves in a V, then sew 3 berries in a triangle at the base of the V.

Border

The border uses the same gauge as the rest of the set: 18 sts per 4 in (10.2 cm).

Coaster Rnd 6 (terracotta): Ch 1. Number the 14 sts of each scallop 1–14. Sc in sts 1–6, 2 sc in st 7, 2 sc in st 8, sc in sts 9–14. Repeat on all 8 scallops, then sl st to first sc.

Count: 112 sts worked 1 per existing st + 16 extra sts (2 per scallop × 8) = 128 sc, or 16 sc per scallop.

Why the math works: The 2 extra sts sit at the widest point of each scallop, where the outer edge is longest, so the curve stays flat. The dips between scallops get no extra sts and stay crisp.

Holder binding (cream): Ch 125.

Row 1: Sc in 2nd ch from hook and in each ch across. (124 sc)

Row 2: Ch 1, turn, sc in each st across. (124 sc) Fasten off, leaving a 30 in (76.2 cm) tail.

Here is how the 124 sts cover each part of the rim:

  • Tops of Sides A and B: 26 + 26 = 52 sts
  • Floors of the two openings: 22 + 22 = 44 sts
  • Four vertical edges of 8 rows each, at 7 sts per edge: 7 × 4 = 28 sts

Total: 52 + 44 + 28 = 124 sts. The strip is 27.6 in (70.1 cm) long.

Why the math works: 8 rows measure 1.6 in (4.1 cm). At 4.5 sts per inch, that length takes 7.2 sts, which rounds down to 7. Using 7 sts keeps the binding from rippling on the vertical edges.

Sew the short ends of the strip together to make a loop. Fold it lengthwise over the rim so Row 1 sits outside and Row 2 sits inside. Pin the four inside corners first, then whipstitch both edges in place.

Final Blocking

  1. Spray each coaster until it is damp but not dripping.
  2. Pin it out at the 8 scallop tips to a 5.5 in (14.0 cm) circle.
  3. Pinch each petal tip and leaf tip into a point.
  4. Leave the coasters to dry completely, about 6 hours.
  5. Pack the holder firmly with a rolled towel. Shape the walls upright and square off the corners of the openings.
  6. Mist the holder lightly and let it dry on the towel.

Final Quality-Control Checklist

  • Every coaster measures 5.5 in (14.0 cm) and has 8 even scallops.
  • Every coaster has 8 petals, 8 leaves and 7 berries.
  • All tails are woven in on the back.
  • The holder base measures 6.4 in (16.3 cm), and the coasters drop in easily.
  • Both openings are 4.9 in (12.4 cm) wide.
  • The binding lies flat at the corners.
  • Both holly motifs sit at the same height.

Troubleshooting

  • Coaster cups upward: Rnd 4 is too tight. Rework it with the next hook size up.
  • Scallops ruffle: Check that Rnd 5 has exactly 112 sts, and tighten your dc tension.
  • Petals curl: Steam them flat before sewing them on.
  • Holder walls flare outward: Work Rnd 17 more firmly so the turning ridge is crisp.
  • Binding is short: Add 1 sc for each vertical edge, for 128 sts in total.
  • Berries look flat: Push each berry’s tail inside it before you sew it on.

Care

Hand wash in cool water and dry flat, reshaping the scallops while they are damp. Do not tumble dry.

Person holding crocheted rust-orange basket with cream flowers and green leaves, styled on wooden table with coffee mug.

Final Notes

Here is the full measurement chain. The coaster base grows from 1.5 in (3.8 cm) to 5.25 in (13.3 cm), and the border round brings it to 5.5 in (14.0 cm). The holder base is 6.4 in (16.3 cm), so the coasters have room to drop in. The walls rise 0.8 in (2.0 cm), and the side sections add 1.6 in (4.1 cm) for a total of 2.4 in (6.1 cm). The 124-st binding covers the rim exactly. If each checkpoint matches, the whole set will fit together.

Happy crocheting!

Leave a Comment