This little letter D is a cheerful bag charm. It has soft sage green stripes, rows of plump cream puff stitches and three tiny daisies sewn on like a spring bouquet. Hang it from a handbag, a backpack or your keys, or give it as a personalized gift.
The palette is sage green, cream and a small amount of sunny yellow for the flower centers, finished with gold hardware. The style is cottage-garden sweet but still neat and graphic, because the stripes and the border keep the letter shape crisp.
The pattern uses US crochet terms. The finished letter measures 3.4 in wide x 4.0 in tall (8.6 cm x 10.2 cm), not counting the keyring.
The letter is worked flat in rows from the bottom up. The bottom bar is worked full width, then the stem and the right side of the bowl are worked separately to leave the center opening. A chain bridge closes the top of the opening, and the top bar is worked full width again. One green border round goes around the outside, one goes around the opening, and then the daisies and hardware are added.
Finished Size and Construction
- Finished size: 3.4 in x 4.0 in (8.6 cm x 10.2 cm)
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: DK (light worsted / #3), cotton or cotton blend
- Hook: 3.5 mm (E-4)
- Number of pieces: 1 letter plus 3 daisies and 6 leaves (appliqués)
- Layout: single motif, no joining
- Letter size before border: 3.0 in x 3.6 in (7.6 cm x 9.1 cm)
- Border depth: 0.2 in (0.5 cm) on every side
- Daisy diameter: about 0.9 in (2.3 cm)
Materials
Choose a smooth, mercerized or matte DK cotton. Cotton holds the puff stitches crisply and stands up to handling on a bag. Avoid fuzzy yarns, because they blur the stripes.
- Sage green: 10 g, about 20 m (22 yd)
- Cream: 6 g, about 12 m (13 yd)
- Sunny yellow: 1 g, about 2 m (2 yd)
These quantities include a margin for swatching and for the many color-change tails.
Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Scissors
– 4 stitch markers
– 1 gold split keyring, 1 in (2.5 cm)
– Short gold chain, 1.2 in (3.0 cm), with 2 jump rings, 6 mm
– 2 pairs of flat-nose pliers
– Pins and a blocking mat
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- st(s) – stitch(es)
- sc2tog – single crochet 2 together
- sc3tog – single crochet 3 together
- RS / WS – right side / wrong side
Puff stitch (puff): *Yarn over, insert the hook in the indicated stitch and pull up a loop to about 0.3 in (0.8 cm); repeat from * 2 more times (7 loops on the hook). Yarn over and pull through all 7 loops, then ch 1 to close. The closing chain is not counted as a stitch.
Gauge and Checkpoints
Gauge: 5 sc = 1 in (2.5 cm), and 2 sc rows = 0.4 in (1.0 cm). One puff row = 0.4 in (1.0 cm). One stripe repeat (1 puff row plus 2 green rows) = 0.8 in (2.0 cm).
Test first: Work Rows 1 to 5 of the letter as a straight swatch (ch 16, 15 sts wide). It should measure 3.0 in wide x 1.2 in tall (7.6 cm x 3.0 cm).
Checkpoints while you work:
– After Row 3: 0.8 in (2.0 cm) tall
– After Row 9: 2.4 in (6.1 cm) tall
– After Row 11: 2.8 in (7.1 cm) tall
– After Row 14: 3.6 in (9.1 cm) tall, 3.0 in (7.6 cm) wide
– After the border: 4.0 in x 3.4 in (10.2 cm x 8.6 cm)
Too big? Go down to a 3.25 mm hook. Too small? Go up to a 3.75 mm hook. If only the puff rows are too tall, pull up the puff loops a little shorter rather than changing hooks.

The Letter
Color changes: Fasten off at the end of every color band and join the new color with a sl st. To save finishing time, work over the tails in the next row. Puff rows are always worked with the RS facing.
Edges: The left edge is the stem edge and the right edge is the bowl edge, as seen from the RS.
Bottom Bar (Rows 1–3)
Row 1 (RS), green: Ch 14. Sc in the 2nd ch from the hook and in each ch across. Turn. (13 sts)
Place a marker on this face to mark it as the RS. You are now at the stem edge.
Row 2 (WS), green: Ch 1. Sc in each st until 1 st remains, then work 3 sc in the last st. (15 sts: 12 sc + 3 sc in 1 st)
This rounds the bottom of the bowl. Fasten off.
Row 3 (RS), cream: With the RS facing, join cream at the bowl edge. Ch 2 (does not count as a st). Puff in the first st, ch 1, sk 1, puff in the next st; repeat from * 6 more times. (15 sts: 8 puffs + 7 ch-1 spaces)
Fasten off.
Number the stitch positions 1–15 from the stem edge. Puffs sit at the odd positions. Positions 1–5 will form the stem, 6–10 the opening and 11–15 the bowl side.
Stem and Bowl Side (Rows 4–9)
Each section is 5 sts wide and is worked separately. Work the stem first and fasten off. Then work the bowl side the same way.
Row 4 (RS), green: With the RS facing, join green at the right-hand end of the section (position 5 for the stem, position 15 for the bowl side). Ch 1. Sc in each puff and ch-1 space of the section. Turn. (5 sts)
Row 5 (WS), green: Ch 1, sc in each st. Fasten off. (5 sts)
Row 6 (RS), cream: Join cream at the right-hand end of the section. Ch 2, puff in the first st, ch 1, sk 1, puff in the next st, ch 1, sk 1, puff in the last st. Fasten off. (5 sts: 3 puffs + 2 ch-1 spaces)
Rows 7–8, green: Repeat Rows 4–5. (5 sts)
Row 9, cream: Repeat Row 6. (5 sts)
Checkpoint: each section is 1.0 in (2.5 cm) wide. The gap between the sections is 1.0 in (2.5 cm) wide and 1.6 in (4.1 cm) tall. Stem height so far is 2.4 in (6.1 cm).
Bridge and Top Bar (Rows 10–14)
Row 10 (RS, bridge), green: With the RS facing, join green at position 15 of the bowl side. Ch 1, sc in the 5 bowl-side sts, ch 5, then sc in the 5 stem sts. Turn. (15 sts: 10 sc + 5 ch)
Keep the bridge chain relaxed so it lies flat across the opening.
Row 11 (WS), green: Ch 1. Sc in each st, working 1 sc into each bridge ch. Fasten off. (15 sts)
Row 12 (RS), cream: Join cream at the bowl edge. Work as Row 3. (15 sts: 8 puffs + 7 ch-1 spaces)
Fasten off.
Row 13 (RS), green: With the RS facing, join green at the bowl edge. Ch 1, sc in each st. Turn. (15 sts)
Row 14 (WS), green: Ch 1. Sc in the first 12 sts, then sc3tog over the last 3 sts at the bowl edge. (13 sts: 12 sc + 1 sc3tog)
This mirrors the rounded bottom of the bowl. Do not fasten off.
Checkpoint: 3.0 in x 3.6 in (7.6 cm x 9.1 cm). The stem should be straight, and both bowl corners should already step inward.
Border
Border gauge: Use 1 sc for each green row end and 2 sc for each puff row end. A puff row is the height of 2 sc rows, so these counts keep the edges flat.
Outer Border (Round 1, Green)
Continue with the green yarn from Row 14. You are at the bowl-side top corner. Rotate the letter to work down the bowl edge.
- Bowl edge, worked downward:
- Row 14 end: 2 sc
- Row 13 end: 1 sc
- Rows 12 to 3: 14 sc (6 green row ends x 1 sc = 6, plus 4 puff row ends x 2 sc = 8)
- Row 2 end: 2 sc
- Row 1 end: 1 sc
- Total: 20 sc. The 2-sc ease stitches round the corners, so there are no sharp corners on this side.
- Bottom edge, across the foundation ch:
- 2 sc in the first ch
- sc in the next 11 ch
- 3 sc in the last ch (stem corner)
- Total: 16 sc
- Stem edge, worked upward:
- Rows 1 to 14: 18 sc (10 green row ends x 1 sc = 10, plus 4 puff row ends x 2 sc = 8)
- Total: 18 sc
- Top edge, across Row 14:
- 3 sc in the first st (stem corner)
- sc in the next 11 sts
- 2 sc in the sc3tog
- Total: 16 sc
Sl st to the first sc. Round total: 20 + 16 + 18 + 16 = 70 sc. Leave a 6 in (15.2 cm) tail and fasten off.
Why the math works: Each long side gets exactly 1 sc per 0.2 in (0.5 cm) of height. There are 3.6 in (9.1 cm) of rows, which is 18 sc on the stem. The bowl side gets 2 extra ease stitches for its curve. The top and bottom each have 13 sts, plus 3 extra sts at the curved bowl end and 2 extra at the square stem corner.
Inner Border (Opening, Green)
With the RS facing, join green in the bottom-left corner of the opening.
- Bottom: 5 sc across the tops of Row 3, positions 6–10.
- Bowl side of the opening, worked upward: 8 sc along Rows 4–9 (green row ends x 1, puff row ends x 2).
- Top: 5 sc into the underside of the bridge chain.
- Stem side of the opening, worked downward: 8 sc.
That is 26 placements. At each of the 4 inner corners, work the last placement of one side and the first placement of the next side as a sc2tog. Sl st to join. (22 sts)
The opening now measures about 0.6 in x 1.2 in (1.5 cm x 3.0 cm).
Daisies (Make 3)
Center, yellow: Make a magic ring and work 5 sc into it. Sl st to the first sc. Pull the ring tight. Fasten off. (5 sc)
Petals, cream: Join cream in any sc. In each sc work (sl st, ch 2, 2 dc, ch 2, sl st). Fasten off, leaving a 10 in (25.4 cm) tail. (5 petals)
Each daisy is about 0.9 in (2.3 cm) across.
Leaves (Make 6, Green)
Ch 5.
– First side: sc in the 2nd ch from the hook, hdc in the next ch, dc in the next ch, sc in the last ch.
– Tip: ch 1, then rotate the work.
– Second side: working into the other side of the foundation chain, sc in the same ch, dc in the next ch, hdc in the next ch, sc in the next ch. Sl st into the tip.
Each leaf is about 0.6 in (1.5 cm) long. Fasten off, leaving a tail for sewing.
Assembly
- Sew 2 leaves behind each daisy so that their tips peek out beyond the petals.
- Use the cream tails to sew one daisy at each of these spots:
- the top-left corner of the stem
- the lower-left corner of the stem
- the middle of the bowl’s right curve
- Stitch through the center and the base of each petal so the daisies lie flat.
- Open a jump ring with the pliers. Pass it through the top border stitches of the stem, catching 2 sts, and attach the chain. Close the ring fully.
- Attach the keyring to the other end of the chain with the second jump ring.
Final Blocking
- Weave in all the remaining tails along matching color bands.
- Mist the letter with water until it is damp but not soaked.
- Pin it to 3.4 in x 4.0 in (8.6 cm x 10.2 cm), keeping the stem straight.
- Ease the bowl corners into a smooth curve and pin the opening to 0.6 in x 1.2 in (1.5 cm x 3.0 cm).
- Fluff each puff with a fingertip so it stays round.
- Leave it to dry completely, then remove the pins.
Final Quality-Control Checklist
- [ ] Stem is straight and 1.2 in (3.0 cm) wide including the border.
- [ ] All 4 cream puff rows line up across the stem and the bowl.
- [ ] Bridge chain lies flat and the opening is centered.
- [ ] The outer border has 70 sts and the inner border has 22 sts.
- [ ] The bowl corners are rounded and the stem corners are square.
- [ ] The daisies are firmly sewn, with no loose petals.
- [ ] Jump rings are fully closed, with no gap that could catch yarn.
- [ ] Final size is 3.4 in x 4.0 in (8.6 cm x 10.2 cm).
Troubleshooting
- The bowl edge ruffles: Remove the 2-sc ease stitches from Row 13 and Row 2 so each of those row ends gets 1 sc.
- The stem edge pulls in: Check that every puff row end has 2 sc, not 1.
- The opening is crooked: Rework the bridge so the chain is exactly 5 ch.
- The puffs look flat: Pull up taller loops and close each puff firmly with its ch 1.
- There are gaps at the color changes: Tug the tails gently before you weave them in.
- The keyring tears the edge: Pass the jump ring through 2 border sts plus the row below.
Care
Hand wash in cool water and lay flat to dry. Remove the metal hardware before washing if possible.

Final Notes
Everything follows one measurement chain:
– 5 sc = 1 in (2.5 cm), and each stripe repeat = 0.8 in (2.0 cm).
– 15 sts and 14 rows make a 3.0 in x 3.6 in (7.6 cm x 9.1 cm) letter.
– The 70-st border adds 0.2 in (0.5 cm) per side, for a finished 3.4 in x 4.0 in (8.6 cm x 10.2 cm).
If your gauge is correct at each checkpoint, the finished letter will match. Swap the daisy color or add more flowers to make it your own.
Happy crocheting!