This bag holder turns a pile of plastic grocery bags into something you won’t mind seeing on the pantry door. It’s a long, slim tube of open lace fans with a solid band at the top, a sturdy hanging strap, and a drawstring that gathers the bottom so you can pull out one bag at a time.
The sample is worked in deep teal green cotton, and it looks just as good in soft peach. Solid colors suit it best because they show off the fans. The fans alternate position every other round, so they stack like scallop shells or fish scales down the whole length.
This pattern uses US crochet terms. The finished holder measures 6 in (15.2 cm) wide when flattened (12 in / 30.5 cm around) and 18.25 in (46.4 cm) long, not counting the strap.
You’ll work it as one seamless piece from the top down: a foundation ring, a single-crochet band, 21 lace rounds, then a trim round, an eyelet round, and a final single-crochet round. After that you make a strap and sew it on, and you thread in a slip-stitch drawstring.
Finished Size and Construction
- Finished size: 6 in (15.2 cm) wide flat × 18.25 in (46.4 cm) long
- Circumference: 12 in (30.5 cm)
- Skill level: Easy-Intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (#4) cotton
- Hook: 5.0 mm (H-8)
- Number of pieces: 1 tubular body, plus 1 strap and 1 drawstring
- Layout: Single seamless tube, worked top-down in joined rounds
- Piece size: 6 in × 18.25 in (15.2 cm × 46.4 cm) flat
- Size before border: 6 in × 18.25 in (15.2 cm × 46.4 cm); the slip-stitch edging adds no measurable length
- Border depth: Under 0.25 in (0.6 cm), a surface finish on the top edge only
Materials
Use a smooth, mercerized or combed worsted-weight cotton. Cotton holds the fans crisp, doesn’t stretch out under the weight of the bags, and survives the washing machine. Acrylic will work too, but the lace will sag more.
- Main color, Deep Teal Green (or Soft Peach): 120 g, about 205 m (224 yd)
Tools:
– 5.0 mm (H-8) crochet hook
– Stitch marker
– Tapestry needle
– Scissors
– Measuring tape
– Rust-proof pins and a blocking surface
– A rolled towel or a 4 in (10.2 cm) wide cardboard tube for blocking
The yarn amount includes a margin of about 15% for your gauge swatch and any differences in tension.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- st(s) – stitch(es)
- sp – space
- rep – repeat
- Rnd – round
Special stitch:
– Fan – 7 dc worked into the same stitch. The 4th dc is the center of the fan.
Gauge and Checkpoints
Gauge: 16 sc and 16 rnds = 4 in (10.2 cm) in sc worked in the round.
Lace gauge: One fan repeat (8 sts) = 2 in (5.1 cm) wide. Each lace round is about 0.75 in (1.9 cm) tall, both fan rounds and chain rounds.
Before you start, test your gauge by working the first 7 rounds of the pattern. They make a short ring that becomes the start of the holder, so if your gauge is right you can just keep going.
Checkpoints:
– After Rnd 6: 12 in (30.5 cm) around, 1.5 in (3.8 cm) tall
– After Rnd 7: 2.25 in (5.7 cm) tall
– After Rnd 17: 9.75 in (24.8 cm) tall
– After Rnd 27: 17.25 in (43.8 cm) tall
– After Rnd 30: 18.25 in (46.4 cm) tall
If your ring is bigger than 12 in (30.5 cm) around, go down half a hook size. If it’s smaller, go up half a hook size. Change the hook size, not the stitch count, because the fans only work on a multiple of 8.
If the lace rounds run taller than 0.75 in (1.9 cm), the holder will just be longer. You can leave out one chain round and one fan round (one pair) for every 1.5 in (3.8 cm) of extra length.

Body Pattern
Top Band
Foundation: Ch 48. Join with a sl st to the first ch to form a ring, making sure the chain isn’t twisted.
Rnd 1: Ch 1, sc in each ch around, join with a sl st to first sc. (48 sc)
Place a marker in the first sc of each round and move it up as you go.
Rnds 2–6: Ch 1, sc in each st around, join. (48 sc each round)
Checkpoint: The band should measure 12 in (30.5 cm) around and 1.5 in (3.8 cm) tall.
Setup Fan Round
Rnd 7: Ch 1, sc in first st, skip 3 sts, fan in next st, skip 3 sts, sc in next st, skip 3 sts, fan in next st, skip 3 sts; rep from * 4 more times, join with a sl st to first sc. (6 sc + 6 fans = 48 sts)*
Each repeat uses 8 sts of the band: 1 sc, 3 skipped, 1 fan, 3 skipped. 6 repeats × 8 sts = 48.
Lace Body
The body alternates two rounds. Each new fan sits over the sc between two fans below, and each new sc sits on the center of a fan below. That’s what makes the fans stagger.
Rnd 8 (Chain Round): Sl st in next 4 dc to reach the center (4th) dc of the first fan. Ch 1, sc in same dc, ch 5, dc in next sc, ch 5, sc in center dc of next fan, ch 5, dc in next sc, ch 5; rep from * 4 more times, join with a sl st to first sc. (6 sc + 6 dc + 12 ch-5 sps)*
Rnd 9 (Fan Round): Ch 1, sc in first sc, skip next ch-5 sp, fan in next dc, skip next ch-5 sp, sc in next sc, skip next ch-5 sp, fan in next dc, skip next ch-5 sp; rep from * 4 more times, join with a sl st to first sc. (6 sc + 6 fans = 48 sts)*
The skipped ch-5 arches sit behind each new fan. They form the open window under every fan.
Rnds 10–27: Repeat Rnds 8 and 9 nine more times. Even-numbered rounds are chain rounds and odd-numbered rounds are fan rounds. Rnd 27 is a fan round.
Stitch counts:
– Every chain round: 6 sc + 6 dc + 12 ch-5 sps
– Every fan round: 6 sc + 6 fans = 48 sts
That gives 21 lace rounds in all (Rnds 7–27): 11 fan rounds and 10 chain rounds.
Checkpoint: After Rnd 17 the piece should measure 9.75 in (24.8 cm). After Rnd 27 it should measure 17.25 in (43.8 cm). Lay it flat to measure, and don’t stretch it.
Bottom Finish
Rnd 28 (Conversion Round): Ch 1, sc in first sc, sc in each of next 7 dc, sc in next sc, sc in each of next 7 dc; rep from * 4 more times, join. (6 sc worked into sc + 42 sc worked into fan dc = 48 sc, no extras)*
Rnd 29 (Eyelet Round): Ch 4 (counts as dc + ch 1), skip next st, dc in next st, ch 1, skip next st; rep from * 22 more times, join with a sl st to 3rd ch of beginning ch-4. (24 dc + 24 ch-1 sps = 48 sts)*
Rnd 30: Ch 1, sc in same st, sc in next ch-1 sp, sc in next dc, sc in next ch-1 sp; rep from * around, join. (24 sc worked into dc + 24 sc worked into ch-1 sps = 48 sc)*
Fasten off and weave in the ends.
Checkpoint: The body should measure 18.25 in (46.4 cm) long and 6 in (15.2 cm) wide flat.
Hanging Strap
Foundation: Ch 6.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (5 sc)
Rows 2–56: Ch 1, sc in each st across, turn. (5 sc each row)
Fasten off, leaving a 12 in (30.5 cm) tail for sewing. The strap measures 1.25 in (3.2 cm) wide and 14 in (35.6 cm) long.
Drawstring
Ch 105. Sl st in the back bump of 2nd ch from hook and of each ch across. (104 sl sts) Fasten off. The cord should measure about 26 in (66.0 cm). If yours is shorter or longer, add or remove chains at the start until it reaches 26 in (66.0 cm).
Border
The border is a single slip-stitch round on the top opening. It firms up the foundation-chain edge so it won’t stretch when bags are pushed in.
Border gauge: 1 sl st per foundation ch, so 4 sl sts = 1 in (2.5 cm), the same as the sc gauge.
Top Edge Rnd: Hold the holder with the foundation edge at the top and the right side facing you. Join yarn with a sl st in any foundation ch, then sl st loosely in each remaining ch around. (48 sl sts) Join to the first sl st and fasten off.
Count per side: With the holder flattened, there are 24 sl sts across the front and 24 across the back. There are no corners on a tube, so nothing is counted twice: 24 + 24 = 48.
Why the math works: The edging puts exactly one stitch in each of the 48 foundation chains. That matches the 48-stitch band, so the opening stays 12 in (30.5 cm) around and doesn’t ruffle or pull in. Work the slip stitches loosely, because tight ones would shrink the opening.
Attach Strap and Drawstring
- Flatten the holder with the beginning-of-round marker at one side fold.
- Place one end of the strap inside the top band at that fold, overlapping the band by 1 in (2.5 cm).
- Place the other end at the opposite fold (stitch 25 of the band), also overlapping by 1 in (2.5 cm), without twisting the strap.
- Whipstitch each end securely through all 6 band rounds. The visible loop measures 12 in (30.5 cm), which is 14 in (35.6 cm) minus the two 1 in (2.5 cm) overlaps.
- Weave the drawstring in and out through the 24 ch-1 eyelets of Rnd 29, starting and ending at the center front.
- Pull it closed to an opening of about 2 in (5.1 cm), tie a bow, and knot each tail end.
Final Blocking
- Wet the holder in cool water and gently squeeze it out. Don’t wring it.
- Roll it in a towel to remove most of the water.
- Slide it over a rolled towel or a 4 in (10.2 cm) wide cardboard tube wrapped in plastic.
- Ease the fans open with your fingers so each fan spreads evenly and each ch-5 arch sits rounded under its fan.
- Pin the length to 18.25 in (46.4 cm) if needed.
- Let it dry completely before you add the drawstring or load it with bags.
Final Quality-Control Checklist
- Top band: 6 rounds of 48 sc, 12 in (30.5 cm) around
- 11 fan rounds, each with 6 fans
- Fans alternate position every fan round
- Each fan has exactly 7 dc
- Rnd 28 has 48 sc; Rnd 29 has 24 eyelets; Rnd 30 has 48 sc
- Body is 18.25 in (46.4 cm) long, 6 in (15.2 cm) wide flat
- Top-edge sl st round has 48 sts and lies flat
- Strap is not twisted and both ends are sewn at opposite folds
- Drawstring goes through all 24 eyelets and the bow sits at the front
- All ends are woven in securely
Troubleshooting
The fans are stacking straight instead of staggering. Check the chain round: the sc has to go in the center dc of each fan, and the dc goes in the sc between fans.
I have 5 or 7 fans in a round. You skipped the wrong number of stitches in Rnd 7. Count 8 sts per repeat and re-work the round.
The fans look cupped or ruffled. Your dc may be too tall or too loose. Go down a hook size for the fan rounds only.
The ch-5 arches look droopy. Tighten your chains slightly, or try ch 4 instead. This gives a shorter holder, so check length against Rnd 27.
The top edge stretches out of shape. Work the slip-stitch round more firmly, but keep it at 48 sts.
Bags fall out of the bottom. Pull the drawstring tighter so the opening is about 1.5 in (3.8 cm), then retie.
Care
Machine wash cold on a gentle cycle in a mesh bag, then reshape and lay flat or hang to dry. Take out the drawstring before washing so it doesn’t tangle.

Final Notes
The whole holder depends on one number: 48 stitches. The 48-stitch foundation ring gives 12 in (30.5 cm) around. That divides into 6 fan repeats of 8 stitches, each 2 in (5.1 cm) wide. The 21 lace rounds at 0.75 in (1.9 cm) each add 15.75 in (40.0 cm) to the 1.5 in (3.8 cm) band. The trim, eyelet, and final rounds add 1 in (2.5 cm) more, for 18.25 in (46.4 cm) in total. The top edging and the eyelet round both stay at 48 stitches, so the tube keeps the same width from top to bottom until the drawstring gathers the end.
If you measure at each checkpoint, the holder will come out the right size.
Happy crocheting!