Daisy Fan Letter D Keychain Crochet Pattern

This little letter D keychain is made from rows of shells in teal and soft butter yellow. Three cream daisies with yellow centers and leafy green accents finish it off. It makes a cheerful personalized charm for a handbag, backpack or set of keys.

The design uses one stitch pattern, the classic shell stitch. The stripes change color every row, and a thin teal edge frames the whole letter so it looks like a single graphic shape. This pattern uses US crochet terms throughout.

The finished keychain measures 3.5 in wide x 4 in tall (8.9 x 10.2 cm), not counting the hanging hardware.

Construction overview: You work the D flat in 10 rows, from the bottom up. Rows 1–2 make the bottom bar. In Rows 3–8 the work splits into two narrow columns, the stem and the bowl, and the gap between them becomes the opening. Row 9 joins the columns again with a chain bridge, and Row 10 finishes the top bar. A border round with graded stitch heights pushes the right side out into a curve. An inner round edges the opening. Last, you sew on three flowers and six leaves and attach the key ring.

Finished Size and Construction

  • Finished size: 3.5 x 4 in (8.9 x 10.2 cm)
  • Skill level: Easy-Intermediate
  • Terminology: US
  • Yarn weight: #2 Fine (sport) cotton
  • Hook: 3.0 mm
  • Number of pieces: 1 letter D, plus 3 flower and 6 leaf appliqués
  • Layout: a single letter shape; no joining
  • Piece size (body): 25 stitches wide, 10 rows tall
  • Size before border: 3 x 3.75 in (7.6 x 9.5 cm)
  • Border depth: 0.125 in (0.3 cm) on the top, bottom and stem; up to 0.375 in (1.0 cm) at the widest point of the curved bowl

Materials

Use a smooth mercerized cotton in sport weight. It shows the shell texture clearly, holds its shape on a keychain and wears well. The amounts below assume about 3.1 m per gram (roughly 155 m per 50 g).

  • Teal: 8 g / 25 m (odd rows, border, inner edging, hanging loop)
  • Butter yellow: 7 g / 22 m (even rows, flower centers)
  • Cream: 2 g / 6 m (petals)
  • Leaf green: 2 g / 6 m (leaves)

All quantities include a small safety margin.

Tools:
– 3.0 mm crochet hook
– Tapestry needle
– Scissors
– Stitch markers
– Rust-proof pins and a foam blocking mat
– One 8 mm jump ring, a 1 in (2.5 cm) length of gold chain, and a 1 in (2.5 cm) split key ring
– Two pairs of flat-nose pliers

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • st(s) – stitch(es)
  • sk – skip
  • MR – magic ring
  • rep – repeat
  • RS / WS – right side / wrong side

Special stitches:
– Shell: 5 dc in the same st. The 3rd dc is the “center dc.”
– Half shell: 3 dc in the same st. At the start of a row, work ch 3 (counts as 1 dc) plus 2 dc.

Gauge and Checkpoints

Gauge: 4 shells (25 sts) = 3 in (7.6 cm) wide, and 2 rows = 0.75 in (1.9 cm) tall.

Work Rows 1–2 first and measure them before you go on. They act as your gauge swatch.

Checkpoints:
– After Row 2: 3 in (7.6 cm) wide, 0.75 in (1.9 cm) tall.
– After Row 8: each column is about 0.8 in (2.0 cm) wide, the gap between them is about 1.3 in (3.3 cm), and the total height is 3 in (7.6 cm).
– After Row 10: 3 x 3.75 in (7.6 x 9.5 cm).
– After the border: 3.5 x 4 in (8.9 x 10.2 cm).

If your piece is too big, go down to a 2.75 mm hook. If it is too small, go up to a 3.25 mm hook. A difference of 0.25 in (0.6 cm) is fine for a keychain. Just keep your tension steady so the stem and bowl columns come out the same width.

Color note: Cut the yarn at the end of every row and leave 4 in (10.2 cm) tails. Join the next color fresh. This keeps each stripe crisp, and the border hides the row ends.

Crocheted daisy with white petals and yellow center, surrounded by teal and yellow yarn on wood.

The Letter D Body

Orientation: With the RS facing, RS rows run from the right edge (the bowl side) to the left edge (the stem side).

Bottom Bar

Foundation: With teal, ch 26.

Row 1 (teal, RS): Sc in 2nd ch from hook, sk 2 ch, shell in next ch, sk 2 ch, sc in next ch; rep from * 3 more times. Fasten off. (4 shells + 5 sc = 25 sts)*

Row 2 (yellow, WS): Join yellow in the last sc. Ch 3, 2 dc in the same sc (half shell), sc in the center dc of the next shell, shell in the next sc; rep from * 2 more times, sc in the center dc of the last shell, 3 dc in the last sc. Fasten off. (3 shells + 2 half shells + 4 sc = 25 sts)*

Check: 3 in (7.6 cm) wide, 0.75 in (1.9 cm) tall.

Split Section (Rows 3–8)

Number the Row 2 stitches 1–25 from left to right with the RS facing. The bowl uses sts 19–25 and the stem uses sts 1–7. Sts 8–18 (11 sts) stay unworked and form the bottom of the opening. Place markers in st 8 and st 18.

Row 3 (teal, RS):
– Bowl: Join teal with a sc in st 25, shell in st 22 (sc), sc in st 19 (center dc). (7 sts) Fasten off.
– Stem: Sk sts 18–8. Join teal with a sc in st 7 (center dc), shell in st 4 (sc), sc in st 1 (top of ch-3). (7 sts) Fasten off.

Row 4 (yellow, WS):
– Stem: Join yellow in the first sc (outer edge). Ch 3, 2 dc in the same st, sc in the center dc, 3 dc in the last sc. (2 half shells + 1 sc = 7 sts) Fasten off.
– Bowl: Join yellow in the first sc (inner edge). Work the same as the stem. (7 sts) Fasten off.

Row 5 (teal, RS):
– Bowl: Join with a sc in the first st (last dc at the right edge), shell in the sc, sc in the top of the ch-3. (7 sts)
– Stem: Join with a sc in the first st (last dc at the inner edge), shell in the sc, sc in the top of the ch-3. (7 sts)

Row 6 (yellow): Repeat Row 4. (7 sts per column)

Row 7 (teal): Repeat Row 5. (7 sts per column)

Row 8 (yellow): Repeat Row 4. (7 sts per column)

Check: each column is about 0.8 in (2.0 cm) wide, the opening is about 1.3 in (3.3 cm) wide, and the piece is 3 in (7.6 cm) tall.

Top Bar

Row 9 (teal, RS, bridge row): Join teal with a sc in the first st of the bowl (right edge), shell in the sc, sc in the top of the ch-3 (inner edge), ch 11 loosely, sc in the first st of the stem (inner edge), shell in the sc, sc in the top of the ch-3 (outer edge). Fasten off. (7 + 11 ch + 7 = 25 sts)

Lay the bridge flat over the opening. It should be the same width as the 11 skipped sts below, about 1.3 in (3.3 cm).

Row 10 (yellow, WS): Join yellow in the last sc. Ch 3, 2 dc in the same st, sc in the center dc of the stem shell, shell in the next sc, [sk 2 ch, sc in next ch, sk 2 ch, shell in next ch, sk 2 ch, sc in next ch, sk 2 ch], shell in the next sc (bowl inner edge), sc in the center dc of the bowl shell, 3 dc in the last sc. Fasten off. (3 + 1 + 5 + 1 + 5 + 1 + 5 + 1 + 3 = 25 sts)

The three full shells sit at positions 7, 13 and 19, exactly where the shells in Row 2 sit, so the top bar lines up with the bottom bar.

Check: 3 x 3.75 in (7.6 x 9.5 cm). The opening is about 1.3 x 2.25 in (3.3 x 5.7 cm).

Weave in all tails now. Run each tail back through its own color stripe for at least 1.5 in (3.8 cm).

Flower Appliqués (make 3)

Rnd 1 (yellow): MR, ch 1, 5 sc in ring, sl st to the first sc. Pull the ring closed and fasten off. (5 sts)

Rnd 2 (cream): Join cream in any sc. (Ch 2, 3 dc, ch 2, sl st) in the same sc, (sl st, ch 2, 3 dc, ch 2, sl st) in the next sc; rep from * 3 more times. Fasten off and leave a 6 in (15.2 cm) tail. (5 petals)*

Each flower is about 0.75 in (1.9 cm) across. Push the yellow center forward slightly so it stands up.

Leaf Appliqués (make 6)

With green, ch 6. Starting in the 2nd ch from the hook: sc, hdc, dc, hdc. In the last ch, work (sc, ch 2, sl st in the 2nd ch from hook, sc) to make the pointed tip. Then, working along the other side of the chain: hdc, dc, hdc, sc. Sl st to the first sc and fasten off, leaving a 6 in (15.2 cm) tail. (10 sts + picot tip)

Each leaf is about 0.625 in (1.6 cm) long.

Border

Border gauge: One round of sc adds 0.125 in (0.3 cm). Each row end is 0.375 in (1.0 cm) tall, which is the length of 3 sc, so 3 sts per row end keeps the edges flat.

Outer Rnd 1 (teal, RS): Join teal with a sc in the last dc of Row 10 (top-right corner).
– Top edge: 1 sc in each of the next 23 sts, then 3 sc in the last st (top-left corner). (27 sts, including the first sc)
– Stem side: 3 sc in each of the 10 row ends. (30 sts)
– Bottom edge: 3 sc in the first foundation ch (bottom-left corner), then 1 sc in each of the remaining 24 ch. (27 sts)
– Bowl side (graded): Work up the row ends as follows:
– Row 1: sc, sc, hdc
– Row 2: hdc, hdc, dc
– Row 3: 3 dc
– Rows 4–7: 4 dc in each
– Row 8: 3 dc
– Row 9: dc, hdc, hdc
– Row 10: hdc, sc, sc

(34 sts)
– Sl st to the first sc. (Total: 27 + 30 + 27 + 34 = 118 sts)

Do not fasten off yet.

Why the math works: The top and bottom get 1 sc per stitch, which matches the body gauge, so they stay straight. The two left corners each get 3 sc so the stem stays square. The right corners get no extra stitches, so they round off. On the bowl side, the taller stitches stick out sideways from the row ends. A dc adds 0.375 in (1.0 cm) at the middle, and the hdc and sc tapers blend that bulge into the corners. The 4-dc row ends give the outer curve the extra length it needs so the edge doesn’t cup. The finished width is 0.125 + 3 + 0.375 = 3.5 in (8.9 cm). The finished height is 0.125 + 3.75 + 0.125 = 4 in (10.2 cm).

Hanging loop: Sl st along the top edge to the center sc of the top-left corner. Ch 8, sl st in the same st. Fasten off. The loop is about 0.5 in (1.3 cm) long.

Inner Rnd (teal, RS): Join teal with a sc in marked st 8 at the bottom of the opening.
– 1 sc in each of sts 9–18. (11 sts)
– 3 sc in each of the 6 bowl row ends (Rows 3–8). (18 sts)
– 1 sc in the base of each of the 11 bridge chs. (11 sts)
– 3 sc in each of the 6 stem row ends. (18 sts)
– Sl st to the first sc. (Total: 58 sts)

Fasten off. The inner corners get no extra stitches so the opening stays crisp. The finished opening is about 1.1 x 2 in (2.8 x 5.1 cm).

Final Blocking

  1. Weave in all the remaining border tails.
  2. Spritz the D until it is damp but not dripping.
  3. Pin the stem straight and square on the mat. Its outer edge should measure 4 in (10.2 cm).
  4. Pin the top and bottom bars level, 3.5 in (8.9 cm) apart at the widest point of the bowl.
  5. Ease the bowl into a smooth curve with one pin at each row end.
  6. Pin the opening open evenly.
  7. Let it dry completely, at least 6 hours.
  8. Unpin, then sew on the leaves: two behind each flower position, angled outward.
  9. Sew on the flowers with the cream tail, stitching through the yellow center and each petal base:
  10. Flower 1 at the top of the stem, over Rows 9–10
  11. Flower 2 on the bowl’s outer edge, over Rows 5–6
  12. Flower 3 at the bottom-left corner, over Rows 1–2
  13. Use pliers to open the jump ring. Thread it through the teal loop and the end of the chain, then close it. Attach the split ring to the other end of the chain.

Final Quality-Control Checklist

  • Outer round has 118 sts and the inner round has 58 sts.
  • Finished size is 3.5 x 4 in (8.9 x 10.2 cm).
  • The stripes alternate teal and yellow, with teal at the bottom and yellow at the top.
  • The stem is straight and the bowl curves smoothly.
  • The bridge chain lies flat without puckering.
  • All three flowers are sewn on securely and none of the petals flip up.
  • The jump ring is fully closed.
  • No tails show on either side.

Troubleshooting

  • The bowl isn’t curved: Check the graded stitches on the bowl side. Rows 4–7 each need 4 dc.
  • The outer edge ruffles: Your border is too loose. Rework it with a 2.75 mm hook.
  • The top bar puckers over the opening: The bridge chain is too tight. Redo Row 9 with a looser chain or a larger hook for that chain only.
  • The columns are different widths: Count each one. Both columns must have exactly 7 sts in every row.
  • The flowers cup: Your petal sl sts are too tight. Steam the flowers gently and press them flat with your fingers.
  • Row ends look gappy: Work the 3 sc into the turning ch-3 rather than around it.

Care

Hand wash in cool water, press out the water in a towel, and dry flat. Remove the metal hardware first if you plan to soak the piece.

Caramel leather handbag with a crocheted D-shaped keychain in yellow, teal, and white daisy flowers, warmly lit.

Final Notes

The measurement chain is:

  • Rows 1–2 at 3 in (7.6 cm) wide confirm your gauge.
  • The split rows bring the height to 3 in (7.6 cm).
  • The bridge and top bar finish the body at 3 x 3.75 in (7.6 x 9.5 cm).
  • The graded border adds 0.125 in (0.3 cm) on three sides and 0.375 in (1.0 cm) on the bowl, giving 3.5 x 4 in (8.9 x 10.2 cm).

If each checkpoint matches, the finished letter will match too. Change the colors to suit the person it’s for, and enjoy making a set.

Happy crocheting!

Leave a Comment