The Ginkgo Fan Beaded Strand is a hanging decoration made of four lacy fan motifs linked in a single vertical column. Wooden beads sit between the fans, and a two-tone tassel finishes the bottom. Each fan has a blush-pink frame of braided slip-stitch spokes and a dusty plum scalloped crown.
The colors are a warm blush pink and a muted plum, with natural light wood beads. The style is boho and botanical. The strand looks good hung in a window, on a door frame, or beside a mirror.
This pattern uses US crochet terms. The finished strand is about 28.5 in (72.4 cm) long from the top hanging loop to the tassel tip. Each fan measures 4 in (10.2 cm) wide by 4.25 in (10.8 cm) tall, not counting the top loop.
The construction is simple and modular:
– First, make four pink fan frames, each with a bottom loop, a short stem, and five spokes.
– Next, link the frames with beaded chains.
– Last, work a three-row plum scallop border across the top of each fan and add the tassel.
Finished Size and Construction
- Finished size: about 28.5 in (72.4 cm) long; fans are 4 in (10.2 cm) wide
- Skill level: Intermediate (slip-stitch spokes, beaded chains)
- Terminology: US
- Yarn weight: Worsted (#4), cotton or cotton blend
- Hook: 4.0 mm (US G-6)
- Number of pieces: 4 fan motifs, 5 wooden beads, 1 tassel
- Layout: 1 column of 4 fans, with 1 bead between each pair of fans and 2 beads above the tassel
- Piece size: 4 in (10.2 cm) wide x 4.25 in (10.8 cm) tall
- Size before border: 3.25 in (8.3 cm) wide x 3.5 in (8.9 cm) tall
- Border depth: about 0.75 in (1.9 cm) at the crown
Materials
Choose a smooth, firmly plied worsted cotton. It shows the braided spokes clearly and holds the scallops in shape. Acrylic also works, but it may need firmer blocking.
- Color A, blush pink: 15 g (about 23 m)
- Color B, dusty plum: 15 g (about 23 m)
- 5 wooden beads, 12 mm (about 0.5 in / 1.3 cm), each with a hole of at least 4 mm
- 4.0 mm (US G-6) crochet hook
- Tapestry needle, plus a dental-floss threader for stringing beads
- Scissors, stitch markers, a blocking mat, and rust-proof pins
- A piece of card 4.5 in (11.4 cm) wide for cutting tassel strands
The yarn quantities include a margin of about 25 percent for swatching, tails, and the tassel.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sp – space
- st(s) – stitch(es)
- BB – back bump of a chain
Special stitch – braided spoke: Ch the number given. Skip the first ch from the hook; this skipped ch becomes the spoke tip. Sl st in the BB of each remaining ch back to the start. Working into the back bumps leaves a neat braid on the front.
Bead-lock ch: Slide a pre-strung bead up against the hook. Yarn over beyond the bead and pull through. The bead is now trapped inside that chain.
Gauge and Checkpoints
Make one complete fan before you make the rest. Gauge is not critical for a decoration, but it controls how the scallops sit.
- Chain gauge: 5 ch = 1 in (2.5 cm)
- Stitch gauge: 16 dc and 9 rows = 4 in (10.2 cm) in dc rows
Checkpoints:
- After the pink frame is done, measure from the bottom of the loop to the tip of the center spoke. It should be 3.5 in (8.9 cm).
- Lay the frame flat with the spokes fanned out. The two outer tips should be 3.25 in (8.3 cm) apart.
- After the border is done, the fan should be 4 in (10.2 cm) wide and 4.25 in (10.8 cm) tall.
If your fan is too big, go down to a 3.5 mm hook. If it is too small, or the scallops cup tightly, go up to a 4.5 mm hook. Change the hook, not the stitch counts.

Pink Fan Frame (Make 4)
Use Color A. The stem chains are numbered 1 to 7, counting up from the bottom loop. Stem ch 7 is the hub.
Bottom loop: Ch 6, sl st in the first ch to form a ring.
Stem: Ch 7. The last ch made is the hub. Place a marker in it.
Inner spokes (worked from the hub):
- Spoke B: braided spoke of ch 7 (6 sl st). Sl st in the hub.
- Spoke C (center): braided spoke of ch 8 (7 sl st). Sl st in the hub.
- Spoke D: braided spoke of ch 7 (6 sl st). Sl st in the hub.
Move down the stem: Sl st in the BB of stem ch 6, then in the BB of stem ch 5 (2 sl st).
Outer spokes (worked from stem ch 5):
- Spoke A: braided spoke of ch 6 (5 sl st). Sl st in stem ch 5.
- Spoke E: braided spoke of ch 6 (5 sl st). Sl st in stem ch 5.
Finish the stem: Sl st in the BB of stem ch 4, 3, 2, and 1 (4 sl st). The 6 stem sl st now cover every stem chain except the hub.
Thicken the loop: Work 10 sc into the ring. Sl st in the first sc. Fasten off and weave in the ends.
Stitch check: Spokes A to E have 5, 6, 7, 6, and 5 sl st, for 29 sl st in total. There are also 6 sl st along the stem and 10 sc in the loop.
Lay the frame flat in this order from left to right: A, B, C, D, E. The skipped ch at the end of each spoke is that spoke’s tip. Then check measurements 1 and 2.
Make All Pieces
Make 4 pink frames. Before you start the links, string all 5 beads onto Color A.
Yarn use per strand:
- Color A: 4 frames, 3 beaded links, 1 bottom tail, 10 tassel strands
- Color B: 4 borders, 10 tassel strands, 1 tassel wrap
Layout grid:
[ top loop ]
[ Fan 1 ]
(bead)
[ Fan 2 ]
(bead)
[ Fan 3 ]
(bead)
[ Fan 4 ]
(bead)
(bead)
[ tassel ]
Joining
Link the fans with Color A chains before you work the borders. Each link runs from the bottom loop of one fan to the tip of the center spoke (C) on the fan below. The border later covers the point where the link is attached.
Beaded link (make 3):
- With a bead strung on Color A, sl st into the center of the 10-sc bottom loop of Fan 1.
- Ch 4. Work 1 bead-lock ch. Ch 3.
- Insert the hook through the tip of spoke C on Fan 2 and sl st.
- Fasten off.
Repeat to join Fan 2 to Fan 3, then Fan 3 to Fan 4.
Stitch-to-stitch logic: Each link has 8 chains in total, counting the bead-lock ch. It joins into exactly one stitch at each end. Nothing is added to either frame, so every frame keeps the same stitch counts.
Tension: Keep the chains on both sides of the bead snug and even. If a chain is loose, the bead can slide and the fan will hang crooked.
Bottom tail: Join Color A in the bottom loop of Fan 4. Ch 3, work 1 bead-lock ch, ch 2, work 1 bead-lock ch, ch 3. Then ch 4 and sl st in the first of those 4 ch to make a small ring for the tassel. Fasten off.
Size checkpoint: Each link is about 2 in (5.1 cm) long. About 0.75 in (1.9 cm) of each link will be hidden behind the border, which leaves a visible gap of 1.25 in (3.2 cm) between fans. The bottom tail measures about 2.6 in (6.6 cm).
Border: Plum Scallop Crown
Use Color B. Work the border on each fan separately, with the right side facing you. Let the other fans hang free while you work.
Border gauge: 16 dc = 4 in (10.2 cm). The finished border is 0.75 in (1.9 cm) deep at the crown.
Row 1 (foundation): Join B with a sc in the tip of spoke A. Ch 6, sc in tip B, ch 4, sc in tip C, ch 4, sc in tip D, ch 6, sc in tip E. Turn.
Count: 5 sc + 20 ch = 25 sts. This makes two ch-6 sps on the sides and two ch-4 sps in the center.
Row 2 (scallops): Ch 1. Sc in the first sc (E).
- Side scallop: (2 hdc, 5 dc, 2 hdc) in the ch-6 sp = 9 sts. Sc in D.
- Center scallop: 5 dc in the ch-4 sp, dc in C, 5 dc in the next ch-4 sp = 11 sts. Sc in B.
- Side scallop: (2 hdc, 5 dc, 2 hdc) in the ch-6 sp = 9 sts. Sc in A. Turn.
Count: 4 sc + 9 + 11 + 9 = 33 sts.
Row 3 (rim): Ch 1. Sc in sts 1–10, sl st in st 11, sc in sts 12–22, sl st in st 23, sc in sts 24–33. Fasten off.
Count: 31 sc + 2 sl st = 33 sts, worked 1 per existing stitch, with no extra stitches added. The sl sts in the valleys sharpen the dips between the scallops.
Fan 1 only: In Row 3, when you reach st 17 (the center of the 33 sts), sc in it, ch 12, and sl st in the same sc. This makes the top hanging loop, about 1.2 in (3.0 cm) long. The stitch count stays at 33.
Why the math works:
– Side scallops: A ch-6 sp spans about 1.2 in (3.0 cm). A semicircle on that span has an outer edge of about 1.9 in (4.8 cm). At border gauge, 9 sts cover about 2.25 in (5.7 cm). That small extra rounds the scallop without ruffling.
– Center scallop: The center span is about 1.8 in (4.6 cm) and needs an edge of about 2.8 in (7.1 cm). 11 dc give 2.75 in (7.0 cm).
– Rim: Row 3 matches Row 2 one stitch for one stitch, so the shape holds.
Tassel
- Wrap Color A 10 times around the 4.5 in (11.4 cm) card. Cut along one edge to get 10 strands, each 9 in (22.9 cm) long. Repeat with Color B.
- Fold all 20 strands in half through the ring at the end of the bottom tail.
- Wrap Color B tightly 6 times around the strands, 0.5 in (1.3 cm) below the ring. Tie it off and bury the ends inside the tassel.
- Trim the tassel to 4 in (10.2 cm) long.
Final Blocking
- Soak the whole strand in cool water, gently squeeze it out, and roll it in a towel.
- Lay the strand flat on the mat with the fans in one straight line.
- Pin each fan so tips A and E are 3.25 in (8.3 cm) apart and the crown is 4 in (10.2 cm) wide.
- Pin each scallop into a smooth arch and open up the spaces between the spokes.
- Straighten each link so the beads are centered.
- Comb the tassel straight and let everything dry completely.
Final Quality-Control Checklist
- Every spoke tip is caught in Border Row 1.
- Each fan has 33 sts in Rows 2 and 3.
- The three scallops on each fan are even, and the center one is the widest.
- The beads are locked in place and do not slide.
- Only Fan 1 has a top loop.
- The strand measures about 28.5 in (72.4 cm).
- All ends are woven in.
Troubleshooting
- The spokes twist: You worked into the front loops of the chain. Work into the BB only.
- The scallops ruffle: Your tension is loose or your hook is too big. Go down 0.5 mm.
- The scallops pull flat: The chain spaces are too tight. Chain more loosely in Row 1.
- A fan hangs tilted: The link is not attached at tip C. Undo it and rejoin it at the center spoke.
- A bead slips: Redo the bead-lock ch with a firmer pull.
Care
Hand wash in cool water and lay flat to dry, reshaping the scallops while they are damp. Don’t soak the wooden beads for long periods.

Final Notes
The measurements build on each other in a short, reliable chain:
– A chain gauge of 5 ch = 1 in gives a 3.5 in (8.9 cm) frame.
– The 0.75 in (1.9 cm) border turns that frame into a fan 4 in x 4.25 in (10.2 cm x 10.8 cm).
– The finished strand adds up to 28.5 in (72.4 cm): a 1.2 in (3.0 cm) top loop, four fans, three visible links of 1.25 in (3.2 cm), a 2.6 in (6.6 cm) bottom tail, and a 4 in (10.2 cm) tassel.
Check each stage as you go, and the strand will hang straight.
Happy crocheting!