Periwinkle Posy Letter Z Keychain Crochet Pattern

This letter Z is a small, sturdy keychain charm made in soft periwinkle blue cotton. A cluster of flowers runs down its left side: two yellow flowers with bumpy cream centers, one white flower with a yellow center, a tiny white flower, and a few moss-green leaves. A gold keyring on a short chain is attached at the top.

The look is sweet but neat. The letter is solid single crochet with a smooth, rolled edge and softly rounded corners, so it keeps its shape on a bag handle or a key ring.

This pattern uses US crochet terms. Without the flowers, the finished letter measures about 3.4 in wide x 3.7 in tall (8.6 cm x 9.4 cm).

You make the Z in one piece, working in rows from the bottom up. First you make the bottom bar. Next you shift a narrow strip one stitch per row to form the diagonal. Then you chain out to make the top bar. A two-round border smooths the whole outline. The flowers and leaves are made separately and sewn on, and the keyring is attached last.

Finished Size and Construction

  • Finished size: 3.4 in x 3.7 in (8.6 cm x 9.4 cm), letter only
  • Skill level: Easy-intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK / light (#3) cotton
  • Hook: 3.0 mm
  • Number of pieces: 1 letter body, plus 4 flowers and 6 leaves sewn on as appliqués
  • Layout: A single Z, with flowers stacked down the left edge
  • Size before border: 3.0 in x 3.3 in (7.6 cm x 8.4 cm)
  • Border depth: about 0.2 in (0.5 cm) on every edge

Materials

Choose a smooth cotton in DK weight, either mercerized or soft-matte. Cotton shows the stitches clearly and keeps the letter flat. Avoid fuzzy or very stretchy yarns, because they make the Z curl and lose its corners.

  • Periwinkle blue (body and border): about 6 g (14 m)
  • Yellow (large flowers, small flower centers): about 3 g (7 m)
  • White (white flowers): about 2 g (5 m)
  • Cream (large flower centers): about 1 g (2 m)
  • Moss green (leaves): about 2 g (5 m)

These amounts include extra yarn for tails and a margin for gauge differences.

Tools:

  • 3.0 mm crochet hook
  • Tapestry needle
  • Sharp sewing needle and thread to match the flowers
  • Gold split keyring, about 1 in (2.5 cm) across, with a short chain
  • One 8 mm gold jump ring and two pairs of flat-nose pliers
  • Stitch markers
  • Rust-proof pins and a blocking mat
  • Spray bottle with water

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • sc2tog: single crochet 2 together. Insert the hook in the next st and pull up a loop. Insert the hook in the following st (or row end) and pull up a loop. Yarn over and pull through all 3 loops.
  • MR: magic ring
  • st(s): stitch(es)
  • RS / WS: right side / wrong side

Special stitch: French knot. Bring the needle up through the fabric and wrap the yarn twice around the needle. Insert the needle back down right next to where it came up, holding the wraps snug as you pull through.

Gauge and Checkpoints

Gauge: 5 sc and 6 rows = 1 in (2.5 cm) in sc worked in rows.

This is a single piece, so the bottom bar is your test. Work Rows 1–5 and measure before you go on.

  • After Row 5: 3.0 in wide x 0.8 in tall (7.6 cm x 2.0 cm)
  • After Row 15: 2.5 in (6.4 cm) tall; the diagonal strip measures 1.0 in (2.5 cm) across horizontally
  • After Row 20: 3.0 in x 3.3 in (7.6 cm x 8.4 cm)
  • After border: 3.4 in x 3.7 in (8.6 cm x 9.4 cm)

If your bar is too wide: change to a 2.75 mm hook. If it is too narrow: change to a 3.25 mm hook. If only the height is off, change how high you pull up your loops. Do not change the row counts, because the diagonal needs exactly 10 shifting rows.

Lavender crocheted charm with yellow and white flowers, green leaves, and gold chain on gray surface.

The Letter Z Body

Use periwinkle blue. The ch 1 at the start of each row does not count as a stitch.

Bottom Bar

Foundation: Ch 16.

Row 1 (RS): Sc in 2nd ch from hook and in each ch across. Turn. (15 sc)

Rows 2–5: Ch 1, sc in each st across. Turn. (15 sc)

With the RS facing you, you are now at the left end of the bar. Place a marker on the RS.

Diagonal

The diagonal is a strip 5 stitches wide. On every row you decrease at the left edge and increase at the right edge. The strip stays at 5 stitches but moves one stitch to the right each row. Ten rows move it ten stitches, from the left end of the bar to the right end.

Row 6 (WS): Ch 1, sc2tog over first 2 sts, sc in next 2 sts, 2 sc in next st. Turn, leaving the remaining 10 sts of Row 5 unworked. (5 sts)

Row 7 (RS): Ch 1, 2 sc in first st, sc in next 2 sts, sc2tog over last 2 sts. Turn. (5 sts)

Rows 8–15: Repeat Rows 6 and 7 four more times, ending with a RS row. (5 sts each row)

Check: the strip should now sit directly above stitches 11–15 of the bottom bar, counting from the left, and line up with its right edge. The piece should measure 2.5 in (6.4 cm) tall.

Top Bar

Row 16 (WS): Ch 11. Turn so the WS faces you. Sc in 2nd ch from hook and in next 9 ch, then sc in each of the 5 strip sts. Turn. (10 + 5 = 15 sc)

Rows 17–20: Ch 1, sc in each st across. Turn. (15 sc)

Do not fasten off. The piece should measure 3.0 in x 3.3 in (7.6 cm x 8.4 cm). Go straight on to the Border section below, then make the flowers.

Flowers and Leaves

Leave an 8 in (20.3 cm) tail on every flower and leaf for sewing.

Large Yellow Flower (make 2)

Rnd 1 (cream): Ch 1, 10 sc in MR, sl st to first sc. Fasten off. (10 sc)

Rnd 2 (yellow): Join with sl st in any st. (Hdc, 3 dc, hdc) in next st, sl st in next st; repeat from * 4 more times, working the final sl st into the joining st. (5 petals; 30 sts)

Use cream to work 3 French knots on the center to give it a bumpy, seed-like look. Each flower is about 1.1 in (2.8 cm) across.

White Flower (make 1)

Rnd 1 (yellow): Ch 1, 10 sc in MR, sl st to first sc. Fasten off. (10 sc)

Rnd 2 (white): Join with sl st in any st. (Hdc, 2 dc, hdc) in next st, sl st in next st; repeat from * 4 more times. (5 petals; 25 sts)

The flower is about 1.0 in (2.5 cm) across.

Small White Flower (make 1)

Rnd 1 (yellow): Ch 1, 5 sc in MR, sl st to first sc. Fasten off. (5 sc)

Rnd 2 (white): Join with sl st in any st. (Ch 2, dc, ch 2, sl st) in next st; repeat from * 4 more times. (5 petals)

The flower is about 0.6 in (1.5 cm) across.

Leaf (make 6)

With green, ch 6.

Rnd 1: Sc in 2nd ch from hook, hdc in next ch, dc in next ch, hdc in next ch, 3 sc in last ch (tip). Working along the other side of the chain: hdc in next ch, dc in next ch, hdc in next ch, sc in last ch. Sl st to first sc. (4 + 3 + 4 = 11 sts)

Each leaf is about 1.0 in (2.5 cm) long and 0.5 in (1.3 cm) wide.

Border

Border gauge: The border uses the same 5 sc per inch as the body. A row of sc is about 0.17 in (0.4 cm) tall, so 1 sc per row end fits the straight ends. The slanted diagonal edges are longer, about 0.26 in (0.7 cm) per row, so each one gets 3 extra sc.

After Row 20 you are at the top-right corner. Ch 1 and turn so the RS faces you. Work counterclockwise.

Round 1 (periwinkle):

  1. Top-right corner: 3 sc in first st. (3)
  2. Top edge: sc in next 13 sts. (13)
  3. Top-left corner: 3 sc in last st. (3)
  4. Left end of top bar: 1 sc in each of the 5 row ends of Rows 20–16. (5)
  5. Lower-left corner of top bar: 3 sc in the free loop of the first ch that holds a sc of Row 16. (3)
  6. Underside of top bar: sc in the free loops of the next 8 ch. (8)
  7. Inner corner: sc2tog over the last ch and the row end of Row 15. (1)
  8. Left diagonal edge: sc in each row end of Rows 14–6, working 2 sc in the row ends of Rows 13, 10 and 7. (9 + 3 = 12)
  9. Left end of bottom bar: 1 sc in each row end of Rows 5–1. (5)
  10. Bottom-left corner: 3 sc in the free loop of the first foundation ch. (3)
  11. Bottom edge: sc in the free loops of the next 13 ch. (13)
  12. Bottom-right corner: 3 sc in the next (last) foundation ch. (3)
  13. Right end of bottom bar: 1 sc in each row end of Rows 1–5. (5)
  14. Upper-right corner of bottom bar: 3 sc in the first (rightmost) st of Row 5. (3)
  15. Top of bottom bar: sc in next 8 unworked sts of Row 5. (8)
  16. Inner corner: sc2tog over the last unworked st and the row end of Row 6. (1)
  17. Right diagonal edge: sc in each row end of Rows 7–15, working 2 sc in the row ends of Rows 8, 11 and 14. (9 + 3 = 12)
  18. Right end of top bar: 1 sc in each row end of Rows 16–20. (5)

Sl st to first sc. Total: 106 sc.

Round 2: Ch 1, sl st loosely in each st around, sl st to first sl st. Fasten off. (106 sl sts)

Why the math works:

  • Straight edges: Each 15-stitch top or bottom edge is worked as 13 sc plus 2 corners. The center sc of each 3-sc corner sits on the 2 end stitches, so the edge neither gains nor loses stitches.
  • Inner edges: Each one uses all 10 free stitches or chains: 1 for the corner, 8 sc, and 1 inside the sc2tog.
  • Diagonals: Each covers all 10 of its row ends: 9 single row ends plus the 1 inside the sc2tog.
  • Corners: The 3-sc groups let the outer corners turn without cupping, and the sc2tog at each inner corner stops ruffling.
  • Rim: The sl st round rolls the edge into a neat rim and softens the corners.

Final Blocking

  1. Weave in all periwinkle tails along the border on the WS.
  2. Pin the Z to your mat at 3.4 in x 3.7 in (8.6 cm x 9.4 cm). Put pins at all 6 outer corners and both inner corners.
  3. Check that the bars are straight and parallel and that the diagonal runs straight from corner to corner.
  4. Mist evenly with water, pat flat, and leave it pinned until it is completely dry.
  5. Mist the flowers and leaves lightly, press the petals flat with your fingers, and let them dry.
  6. Arrange: Lay out the flowers and leaves along the left side of the Z:
  7. one large yellow flower at the left end of the top bar
  8. the white flower below it, over the left edge of the diagonal
  9. the second large yellow flower where the diagonal meets the bottom bar
  10. the small white flower just to the right of the lower yellow flower, on the bottom bar

Slide the leaves partly under the flowers so they fan out past the left edge: one next to the top flower, two between each pair of flowers, and one at the bottom. The flowers can extend about 0.4 in (1.0 cm) past the edge of the letter.
7. Sew: Tack each leaf at its base. Sew each flower around its center and under each petal tip, using thread or the yarn tails. On the RS, hide your stitches between the crochet stitches.
8. Hardware: Open the jump ring with the two pliers. Pass it through the top edge of the border about 1 in (2.5 cm) from the top-left corner. Add the keyring chain and close the jump ring completely.

Final Quality-Control Checklist

  • The letter measures 3.4 in x 3.7 in (8.6 cm x 9.4 cm)
  • The bottom and top bars each have 15 sc and 5 rows
  • The diagonal strip has 5 sts on every row from Row 6 to Row 15
  • Border Round 1 has 106 sc and Round 2 has 106 sl sts
  • All 6 outer corners are rounded and flat, and both inner corners lie flat
  • All 4 flowers and 6 leaves are sewn on securely, with no loose petal tips
  • The jump ring is fully closed and the keyring hangs straight
  • All tails are woven in and trimmed

Troubleshooting

The diagonal leans the wrong way. You swapped the increase and decrease. On WS rows the decrease comes first; on RS rows the increase comes first.

The strip gains or loses stitches. Count 5 sts at the end of every diagonal row. A missed sc2tog adds a stitch, and a missed 2-sc increase loses one.

The top bar does not line up with the bottom bar. Make sure you chained exactly 11 for Row 16, giving 10 sc plus the 5 strip sts.

Outer corners curl. Check that you worked 3 sc in each corner, and work the sl st round loosely.

Inner corners pucker. Do not skip the sc2tog, and do not add extra sc there.

Diagonal edges ripple. Leave out one of the extra sc on that edge. If the edge pulls tight instead, add one.

Petals cup forward. Your tension is too tight. Block the flowers flat, or use a hook one size larger for the petal round.

Care

Remove the keyring before washing so the metal does not tarnish or rust. Hand wash in cool water with mild soap, press out the water in a towel, and dry flat.

Cream linen tote with tan leather handles showcasing a purple crocheted Z charm decorated with yellow and white flowers outdoors.

Final Notes

The measurements build up in a simple chain that is easy to check:

  1. At 5 sc and 6 rows per inch, the 15-stitch, 5-row bottom bar measures 3.0 in x 0.8 in (7.6 cm x 2.0 cm).
  2. Ten diagonal rows bring the piece to 2.5 in (6.4 cm) tall.
  3. The top bar finishes the body at 3.0 in x 3.3 in (7.6 cm x 8.4 cm).
  4. The 106-stitch border adds about 0.2 in (0.5 cm) on every edge, for a finished letter of 3.4 in x 3.7 in (8.6 cm x 9.4 cm).

Add the flowers, leaves and gold keyring, and your Z is ready for a bag, a set of keys, or a gift tag.

Happy crocheting!

Leave a Comment