This letter T keychain is a small, sturdy bag charm worked in crisp turquoise and navy stripes. Three cream daisies with golden centers and sage-green leaves add a soft garden touch, and a gold keyring finishes it.
The stripes are simple 2-row bands of single crochet. That gives a tight, almost woven texture that holds its shape on a bag or a set of keys. The look is clean and graphic, and the flowers soften the edges.
This pattern uses US crochet terms. The finished T measures 4 in (10.2 cm) wide and 4 in (10.2 cm) tall, not counting the keyring.
You work the crossbar first in rows. Then you work the stem straight down from the center stitches of the crossbar, so there is nothing to sew between the two parts. Last, you make the flowers and leaves, sew them on, and attach the hardware.
Finished Size and Construction
- Finished size: 4 in (10.2 cm) wide × 4 in (10.2 cm) tall
- Skill level: Easy
- Terminology: US crochet terms
- Yarn weight: DK / light worsted (#3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 1 main piece (the T), plus 3 flowers and 4 leaves as appliqués
- Layout: one-piece letter; the stem grows from the center of the crossbar
- Crossbar size: 4 in (10.2 cm) × 0.8 in (2.0 cm), 20 sts × 4 rows
- Stem size: 1.2 in (3.0 cm) × 3.2 in (8.1 cm), 6 sts × 16 rows
- Size before border: 4 in (10.2 cm) × 4 in (10.2 cm)
- Border depth: 0 in (0 cm). There is no added border, and the stitch edges are the finished edges.
Materials
Use a smooth mercerized or combed cotton in DK weight. Cotton gives crisp stitch definition and doesn’t stretch out on a bag handle. Avoid fuzzy or very soft acrylics, which blur the stripes.
- Turquoise: 5 g, about 12 m
- Navy blue: 5 g, about 12 m
- Cream: 2 g, about 5 m (flower petals)
- Golden yellow: 1 g, about 2 m (flower centers)
- Sage green: 1 g, about 3 m (leaves)
These quantities include a margin for swatching and weaving in ends.
Tools:
- 3.5 mm (E-4) crochet hook
- Gold split keyring, 1 in (2.5 cm) across
- Gold chain, 0.75 in (1.9 cm) long, plus 2 small jump rings
- 2 flat-nose pliers
- Tapestry needle
- 2 stitch markers
- Sewing pins
- Scissors
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- st(s) – stitch(es)
- MR – magic ring
- yo – yarn over
- RS / WS – right side / wrong side
- FO – fasten off
Color change (special technique): Work the last sc of the row until 2 loops are on the hook. Drop the old color, yo with the new color, and pull it through both loops. Ch 1 and turn with the new color.
Gauge and Checkpoints
Gauge: 10 sc × 10 rows = 2 in (5.1 cm) square, which is 5 sts and 5 rows per inch (2.5 cm).
Work this tight single crochet gauge before you start the letter. Chain 11, then work 10 rows of 10 sc and measure in the center of the swatch. With cotton, the stitches and rows come out close to square at this tension.
Checkpoints:
- After Row 1: the crossbar measures 4 in (10.2 cm) long.
- After Row 4: the crossbar measures 4 in (10.2 cm) × 0.8 in (2.0 cm).
- After Row 12: the T measures 2.4 in (6.1 cm) tall, and the stem is 1.6 in (4.1 cm) long below the crossbar.
- After Row 20: the T measures 4 in (10.2 cm) tall, and the stem is 1.2 in (3.0 cm) wide.
- Each flower measures about 0.8 in (2.0 cm) across. Each leaf measures about 0.8 in (2.0 cm) long.
If the piece is too big: go down to a 3.25 mm (D-3) hook. Don’t drop stitches, because that changes the letter’s proportions.
If the piece is too small: go up to a 3.75 mm (F-5) hook.
If only the height is off: your row gauge differs from your stitch gauge. Check that you aren’t pulling up tall loops. A small difference is fine, as long as each stripe stays at 2 rows.

Crossbar
Start with turquoise. Row 1 is the top edge of the T, and the RS faces you on odd rows.
Foundation: With turquoise, ch 21.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across, turn. (20 sts)
Row 2 (WS): Ch 1 (does not count as a st), sc in each st across. Change to navy in the last st, then ch 1 and turn. (20 sts)
Cut turquoise, leaving a 6 in (15.2 cm) tail. You will rejoin it for the stem.
Row 3: With navy, sc in each st across, ch 1, turn. (20 sts)
Row 4: Sc in each st across. (20 sts) Don’t turn. FO navy, leaving a 6 in (15.2 cm) tail.
Checkpoint: the crossbar is 4 in (10.2 cm) × 0.8 in (2.0 cm), with a turquoise band on top and a navy band on the bottom.
Stem
The stem is worked from the center 6 stitches of Row 4. Lay the crossbar with the Row 4 edge at the top and the RS facing you.
Count the stitches. Leave 7 sts on each side, so the stem uses sts 8–13. Mark st 8 and st 13. The math is 7 + 6 + 7 = 20 sts.
Row 5 (RS): Join turquoise with a sl st in st 8. Ch 1, then sc in the same st and in each of the next 5 sts, ending in st 13. Turn. (6 sts)
Row 6: Ch 1, sc in each st across. (6 sts) In the last st, join navy using the color change, then ch 1 and turn.
From here, carry the unused color loosely up the side edge of the stem. Don’t cut it. Because each stripe is 2 rows, every color change happens on the same edge.
Row 7: With navy, sc in each st across, ch 1, turn. (6 sts)
Row 8: Sc in each st across, change to turquoise in the last st, ch 1, turn. (6 sts)
Rows 9–20: Repeat Rows 5–8 three more times. Work each row as 6 sc, then ch 1 and turn. Change color at the end of every even row. (6 sts in every row)
The stripes run as follows:
- Turquoise: Rows 9–10, 13–14, 17–18
- Navy: Rows 11–12, 15–16, 19–20
At the end of Row 20, FO navy and cut turquoise. Leave 6 in (15.2 cm) tails.
The stem has 16 rows, which is 8 stripes. It begins with turquoise directly under the navy crossbar band and ends with navy at the bottom.
Checkpoint: the stem is 1.2 in (3.0 cm) × 3.2 in (8.1 cm), and the full letter is 4 in (10.2 cm) × 4 in (10.2 cm).
Weave in all ends inside stripes of the same color, along the side edges. Run the carried strands back through their own stripe, so no color shows through on the wrong side.
Flowers (make 3)
Rnd 1: With golden yellow, MR, ch 1, 5 sc in ring. Pull the ring tight and join with a sl st to the first sc. (5 sts) FO yellow.
Rnd 2: Join cream in any sc. Work (sl st, ch 2, 2 dc, ch 2, sl st) in the same st, then repeat in each of the remaining 4 sc. (5 petals)
FO, leaving a 12 in (30.5 cm) tail for sewing. Weave the yellow tail to the back.
Checkpoint: each flower is about 0.8 in (2.0 cm) across, with 5 rounded petals.
Leaves (make 4)
With sage green, ch 5.
Side 1: Sc in 2nd ch from hook, hdc in next ch, dc in next ch, sc in last ch. (4 sts)
Side 2: Ch 1. Working along the other side of the foundation chain, sc in the first ch, dc in next ch, hdc in next ch, sc in last ch. (4 sts)
Tip: Sl st into the tip. (8 sts total, plus tip sl st)
FO, leaving an 8 in (20.3 cm) tail.
Checkpoint: each leaf is about 0.8 in (2.0 cm) long and 0.4 in (1.0 cm) wide, with a pointed tip.
Border (Edge Finish)
Border gauge: this design has no added border round. The finished edges are the stitch edges themselves, worked at the main gauge of 5 sts and 5 rows per inch (2.5 cm). That is what keeps the outline crisp and stops the stripe colors from being interrupted.
Edge counts per side:
- Top edge: 20 sts = 4 in (10.2 cm)
- Crossbar ends: 4 rows each = 0.8 in (2.0 cm)
- Underside of each arm: 7 sts = 1.4 in (3.6 cm)
- Stem sides: 16 rows each = 3.2 in (8.1 cm)
- Stem bottom: 6 sts = 1.2 in (3.0 cm)
Why the math works:
- The bottom edge adds up to 7 + 6 + 7 = 20 sts, which matches the 20-st top edge, so the arms are exactly even.
- The height adds up to 4 crossbar rows + 16 stem rows = 20 rows. At 5 rows per inch, that is 4 in (10.2 cm), which equals the width, so the letter sits square.
Tidy edges: to keep the edges neat, always ch 1 at the turn. Work the first sc into the very first st, and never skip the last st. If a side edge looks loose, run the yarn tail through the edge loops and snug it gently.
Final Blocking
- Pin the T face down on a blocking mat. The top edge should be 4 in (10.2 cm), and the total height should be 4 in (10.2 cm).
- Check that both arms measure 1.4 in (3.6 cm) from the stem to the tip. Pin the corners square.
- Mist lightly with water or steam from above. Don’t touch the iron to the yarn.
- Let it dry completely, at least 2 hours.
- Pin and mist the flowers and leaves flat in the same way, and let them dry.
- Place the appliqués: stack each leaf first, then put its flower on top. Sew through the flower center and along the petal bases with matching tails. Sew the leaf at its base and tip.
- Flower A: center it on the right arm, over sts 15–16 and Row 3. Tuck one leaf behind its lower right edge, pointing down and to the right.
- Flower B: center it on the stem at Rows 11–13. Let it overlap the left stem edge by about 0.25 in (0.6 cm). Tuck one leaf behind its upper left edge, pointing up and outward.
- Flower C: center it on the stem at Rows 18–19. Tuck one leaf on each side, pointing left and right past the stem edges.
- Attach the hardware: open a jump ring with pliers and pass it through the top edge between sts 10 and 11, catching Rows 1–2. Close the ring. Then link the chain and the split keyring using the second jump ring.
Final Quality-Control Checklist
- [ ] Crossbar is 20 sts × 4 rows: turquoise on top, navy on the bottom.
- [ ] Stem is 6 sts × 16 rows, centered with 7 sts free on each side.
- [ ] There are 8 stem stripes, starting with turquoise and ending with navy.
- [ ] Overall size is 4 in (10.2 cm) × 4 in (10.2 cm).
- [ ] No carried strands are visible on the RS.
- [ ] All 3 flowers have 5 petals and measure about 0.8 in (2.0 cm).
- [ ] There are 4 leaves: one each for Flowers A and B, and two for Flower C.
- [ ] Appliqués are sewn flat, with no loose petals.
- [ ] Jump rings are fully closed, and the keyring hangs centered.
Troubleshooting
The stem is off-center. Recount Row 4. The stem must start in st 8 and end in st 13. Rip back and rejoin if needed.
The stem edges wave or pull in. You are carrying the unused color too tightly or too loosely. Leave a little slack and catch the strand under the ch 1 at each turn.
The stripes have jagged color “blips.” Change color on the final yo of the previous row, not at the start of the new row.
The piece curls. Single crochet in cotton can curl a little. Block it firmly, and check that you aren’t working too tightly.
The flowers cup upward. Your petals are too tight. Loosen the ch 2 at each side of the petals, or block the flowers flat before sewing.
The keyring tears the edge. Pass the jump ring through two rows, not just the top loops.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and dry flat. Remove the metal hardware before washing so it doesn’t tarnish.

Final Notes
Everything here follows one measurement chain:
- Your 5 sts and 5 rows per inch (2.5 cm) gauge sets the 20-st crossbar at 4 in (10.2 cm).
- The centered 6-st stem is 1.2 in (3.0 cm) wide, with 7 sts on each side.
- 4 rows of crossbar plus 16 rows of stem make 4 in (10.2 cm) of height.
- There is no border, so nothing gets added to those numbers.
Check your swatch, count every row, and your T will come out square, striped, and ready to bloom.
Happy crocheting!