Woodland Scale Pinecone Ornament Crochet Pattern

This little pinecone ornament has overlapping rounded scales in warm caramel brown, two sage green leaves at the top, and a cream chain loop for hanging. It is solid and lightly stuffed, so it keeps its 3D shape on a branch.

The palette is simple: one brown for the cone, green for the leaves, and cream for the hanger. The style is rustic and natural, and it suits a farmhouse or woodland tree, a gift tag, or a wreath.

The pattern uses US crochet terms. The finished cone is 3.5 in (8.9 cm) tall and 2.5 in (6.4 cm) wide across the widest scales. With the loop included, the ornament hangs about 5.5 in (14.0 cm) long.

The body is one continuous piece worked top-down in the round. You start with a chain ring at the neck and work single crochet rounds. On every third round you work fan-shaped scales into the front loops, and the next round goes into the back loops behind them. Each tier of scales hangs down over the one below. You close the tip, then work the neck collar into the foundation ring and close the top. Last, you sew on two small leaves and a slip-stitch hanging loop.

Finished Size and Construction

  • Finished size: 3.5 in (8.9 cm) tall x 2.5 in (6.4 cm) wide; about 5.5 in (14.0 cm) long with the loop
  • Skill level: Intermediate (front and back loop work, shaping in the round)
  • Terminology: US crochet terms
  • Yarn weight: DK / light (#3), cotton or cotton blend
  • Hook: 3.0 mm (US C/2 or D/3)
  • Number of pieces: 1 finished ornament: one cone body, plus 2 small leaves and 1 hanging loop sewn on
  • Layout: Single 3D ornament; no assembly grid
  • Piece size: Body 1.85 in (4.7 cm) across at its widest sc round; scales add about 0.3 in (0.8 cm) on each side
  • Size before border: About 3 in (7.6 cm) tall, from foundation ring to tip
  • Border depth: Neck collar adds about 0.5 in (1.3 cm), including the closed dome

Materials

Pick a smooth, firmly twisted DK cotton. Mercerized or matte cotton both work. Clear stitch definition matters, because the scales are the whole design. Avoid fuzzy or very soft acrylic: the fans go limp and the overlap blurs.

  • Color A, caramel brown (body): 25 g, about 50 m (55 yd)
  • Color B, sage green (leaves): 3 g, about 6 m (7 yd)
  • Color C, cream (hanging loop): 3 g, about 6 m (7 yd)

All quantities include a margin of roughly 15 percent for your gauge swatch and tails.

Tools:

  • 3.0 mm crochet hook
  • Locking stitch marker
  • Polyester fiberfill, about 8 g
  • Tapestry needle
  • Scissors
  • Pins and a small foam block for blocking the leaves

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • dec – sc2tog, invisible decrease preferred
  • sk – skip
  • FLO / BLO – front loop only / back loop only
  • st(s) – stitch(es)

Special stitch – Scale (worked in FLO): Sl st in the next st, sk 1 st, 6 dc in the next st, sk 1 st. One Scale uses exactly 4 stitches of the base round. Every scale round has a stitch count divisible by 4.

Scale round rule: A scale round is worked into the front loops of the round just made. The next round is worked into the back loops of that same base round. That means scale rounds add no height and no stitches to the body. The base count simply carries forward.

Gauge and Checkpoints

Gauge: 11 sc x 12 rounds = 2 in (5.1 cm) in sc worked in the round. That is 5.5 sc and 6 rounds per inch (2.5 cm).

Make a test swatch first: ch 12, work 12 rows of sc (11 sts), and measure. Better still, work the body through Round 8. That is your real test piece.

Checkpoints:

  • After Round 1 (16 sts): The ring lies flat at about 2.9 in (7.4 cm) around, or 0.9 in (2.3 cm) across.
  • After Round 8 (32 sts): The body measures about 5.8 in (14.7 cm) around, or 1.85 in (4.7 cm) across. It is about 1 in (2.5 cm) tall, measured along the side.
  • After Round 17: The side measures about 2 in (5.1 cm) from the ring.
  • After Round 29 (closed): The body is about 3 in (7.6 cm) tall from ring to tip.

If your piece is too big: Go down to a 2.75 mm hook. If the scales flare out like a ruffle, your dc are loose. Pull each yarn-over snug.

If your piece is too small: Go up to a 3.25 mm hook. If the scales cup inward and won’t lie down, try a 3.25 mm hook on the scale rounds only.

Handcrafted crochet plant ornament featuring a tan textured pot, green braided leaves, and cream rope detail.

Body (Color A)

Work in a continuous spiral. Do not join the sc rounds. Move the marker to the first st of each sc round.

Foundation: Ch 16, sl st in the first ch to form a ring. Do not twist. You will use the free loops of this chain later for the collar.

Round 1: Ch 1, sc in each ch around. (16 sts)

Round 2: (Sc 3, inc) 4 times. (20 sts)

Round 3 (Scale Tier 1): Working in FLO of Round 2: Scale 5 times. Sl st in the first sl st. (5 scales)

Round 4: Fold the scales down toward you. Working in BLO of Round 2, starting with the stitch that holds the first sl st: (sc 4, inc) 4 times. (24 sts)

Round 5: Sc in each st around, through both loops. (24 sts)

Round 6 (Scale Tier 2): In FLO of Round 5: Scale 6 times. Sl st in the first sl st. (6 scales)

Round 7: In BLO of Round 5: (sc 5, inc) 4 times. (28 sts)

Round 8: (Sc 6, inc) 4 times. (32 sts)

Check your size here against the gauge checkpoint.

Round 9 (Scale Tier 3): In FLO of Round 8: Scale 8 times. Sl st in the first sl st. (8 scales)

Round 10: In BLO of Round 8: sc in each st around. (32 sts)

Round 11: Sc in each st around. (32 sts)

Round 12 (Scale Tier 4): In FLO of Round 11: Scale 8 times. Sl st in the first sl st. (8 scales)

Round 13: In BLO of Round 11: sc in each st around. (32 sts)

Round 14: Sc in each st around. (32 sts)

Round 15 (Scale Tier 5): In FLO of Round 14: Scale 8 times. Sl st in the first sl st. (8 scales)

Round 16: In BLO of Round 14: (sc 6, dec) 4 times. (28 sts)

Round 17: Sc in each st around. (28 sts)

Round 18 (Scale Tier 6): In FLO of Round 17: Scale 7 times. Sl st in the first sl st. (7 scales)

Round 19: In BLO of Round 17: (sc 5, dec) 4 times. (24 sts)

Stuff the body now through the bottom opening. Fill it firmly but don’t let it bulge between the scale tiers.

Round 20: Sc in each st around. (24 sts)

Round 21 (Scale Tier 7): In FLO of Round 20: Scale 6 times. Sl st in the first sl st. (6 scales)

Round 22: In BLO of Round 20: (sc 4, dec) 4 times. (20 sts)

Round 23: (Sc 3, dec) 4 times. (16 sts)

Round 24 (Scale Tier 8): In FLO of Round 23: Scale 4 times. Sl st in the first sl st. (4 scales)

Round 25: In BLO of Round 23: (sc 2, dec) 4 times. (12 sts)

Round 26: Sc in each st around. (12 sts)

Round 27 (Scale Tier 9): In FLO of Round 26: Scale 3 times. Sl st in the first sl st. (3 scales)

Round 28: In BLO of Round 26: (sc 1, dec) 4 times. (8 sts)

Top up the stuffing in the tip.

Round 29: Dec 4 times. (4 sts)

Fasten off. Weave the tail through the front loops of the last 4 sts, pull closed, and hide the end inside.

Scale total: 5 + 6 + 8 + 8 + 8 + 7 + 6 + 4 + 3 = 55 scales in 9 tiers. The three 8-scale tiers form the wide middle. The tiers taper to 3 small scales at the tip.

Leaves (Color B, make 2)

Ch 7.

Side 1: Sc in the 2nd ch from hook, hdc in next ch, dc in each of next 2 ch, hdc in next ch, sc in last ch. (6 sts)

Tip: Ch 1. Rotate to work along the free loops of the foundation chain.

Side 2: Sc in the first ch, hdc in next ch, dc in each of next 2 ch, hdc in next ch, sc in last ch. (6 sts)

Sl st in the first sc. (12 sts plus the ch-1 tip)

Fasten off and leave an 8 in (20.3 cm) tail. Each leaf is about 1.25 in (3.2 cm) long and 0.5 in (1.3 cm) wide.

Hanging Loop (Color C)

Ch 28, about 4 in (10.2 cm). Sl st in the back bump of the 2nd ch from hook and each ch across. (27 sl sts)

Fasten off and leave a 6 in (15.2 cm) tail. The slip stitches give you a firm, rounded cord that won’t stretch on the branch.

Border: Neck Collar (Color A)

The collar is the border of this piece. It finishes the open top and gives the leaves and loop a firm base.

Border gauge: Same as the body, 5.5 sc per inch (2.5 cm). The collar should sit snug and upright, not flare.

Hold the ornament tip down. Join Color A in any free loop of the foundation chain on the top side.

Collar Round 1: Ch 1, sc in each free loop of the foundation chain. (16 sts: 16 chain loops x 1 sc each)

Collar Round 2: Sc in each st around. (16 sts)

Collar Round 3: Dec 8 times. (8 sts)

Stuff the neck and dome lightly.

Collar Round 4: Dec 4 times. (4 sts)

Fasten off and leave a 12 in (30.5 cm) tail. Weave it through the front loops, pull closed, and keep it for attaching the loop.

Why the math works: The foundation chain has 16 chains. Body Round 1 uses one side of the chain and the collar uses the other, with one sc per chain on both sides. So the collar opens at exactly 16 stitches, 2.9 in (7.4 cm) around. That matches Round 1 and creates a clean, narrow neck. Halving to 8 and then 4 stitches closes the dome without a pucker.

The collar is 2 rounds tall plus the closing dome, about 0.5 in (1.3 cm). Added to the 3 in (7.6 cm) body, that gives the finished 3.5 in (8.9 cm) height.

Final Blocking

Do the steps in this order:

  1. Leaves first. Pin each leaf flat on foam. Mist with water and let dry fully, about 1 hour.
  2. Attach the leaves. Place them on opposite sides of the closed top, pointing outward and slightly up. Sew each base with its tail through the collar’s Round 2 stitches. Hide the tails inside.
  3. Attach the loop. Fold the cord in half. Push both ends down through the center of the top, between the leaves, about 0.25 in (0.6 cm). Sew them through with the collar tail and knot them inside. The visible loop should be about 2 in (5.1 cm) long.
  4. Shape the scales. Lightly mist the cone. Smooth each tier of scales downward with your fingertips, so every fan covers the base of the tier below.
  5. Dry upright. Hang the ornament by its loop to dry. That way gravity helps the scales settle downward.

Don’t use a hot iron. Light steam held 1 in (2.5 cm) away is fine on cotton, but don’t press.

Final Quality-Control Checklist

  • Nine scale tiers: 5, 6, 8, 8, 8, 7, 6, 4, and 3 scales
  • Every scale has 6 dc and sits centered between its 2 sl sts
  • No sc rounds were accidentally worked through both loops after a scale round
  • The cone measures 3.5 in (8.9 cm) tall and 2.5 in (6.4 cm) wide
  • The neck collar is 16 sts around and stands upright
  • The tip and top are closed with no holes or visible stuffing
  • Both leaves are the same size and sit symmetrically
  • The loop is centered, firmly secured, and about 2 in (5.1 cm) long
  • All tails are hidden inside the body

Troubleshooting

The scales point up instead of down: You worked the scales into the back loops. Scales always go in the FLO, toward you. Then fold them down before working the next round.

There are gaps between the tiers: Your BLO rounds are loose. Tighten your tension on those rounds, or drop to a 2.75 mm hook for the sc rounds only.

A scale round comes out with the wrong count: Check the base round. It must be divisible by 4. Recount the sc round before you start the scales.

The shape is lumpy: You have too much stuffing. Remove some, and spread the rest evenly with the hook handle.

The neck flares: Collar Round 1 got an extra stitch. Work exactly one sc per chain loop for 16 sts.

The leaves curl: Block them again, pinning the tip and the base separately.

Care

Spot clean with a damp cloth and mild soap, reshape the scales, and air dry while hanging. Don’t machine wash or tumble dry, because the stuffing can clump.

Crocheted tan pinecone ornament with green leaves held in hand against evergreen branches and golden holiday string lights.

Final Notes

The whole ornament comes down to one measurement chain. A gauge of 5.5 sc per inch (2.5 cm) gives a 16-stitch neck ring that measures 2.9 in (7.4 cm). The ring grows to a 32-stitch middle, 5.8 in (14.7 cm) around, carrying nine tiers of 4-stitch scales. The body tapers to a 3 in (7.6 cm) closed cone, and the 16-stitch collar brings it to 3.5 in (8.9 cm) tall and 2.5 in (6.4 cm) wide. If you hit the checkpoints at Rounds 1, 8, and 17, the final size takes care of itself. Make one in brown for a classic look, or try a frosted white version for a winter tree.

Happy crocheting!

Leave a Comment